How To: Fix Or Replace Windshield Spray Nozzle Dodge Mopar Charger Challenger
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- This video will show you how to fix your windshield sprayer nozzle if it is no longer spraying. This video also shows you how to replace the entire nozzle if broken or damaged. I am specifically working on a 2010 dodge charger and bought the nozzles on eBay for $24 total.
I had the same issue. Was told at the shop I needed to replace the nozzles. Well, I decided to check myself and the hose was loose. Attached it and the issue was resolved!
I think the part where the dog was playing was best
2012 Dodge Ram, it worked. Thx for the video. The factory plastic Nozzels apparently become brittle and break around 5 years old. the passenger side of my mine wasn't working at all, and the driver side was about 10% of the normal pressure. The passenger side base, inside the hood, broke off inside the 90° rubber joint that connected to the washer fluid line, dangling... fluid was being pusehed through the hose, but it was going stright out... so the inside hood liner was soaked on the passenger side. They were so brittle from being weathered in 5 years that both nozzels broke into pieces and fell inside the hood shell when I tried to remove them. oh well, but now it's working perfect with replacement nozels.
Stomper Jar my 09 dodge ram is doing the same damn thing going to try this
My 2012 Ram 1500 just started this issue. Which nozzles did you purchase?.. I figured it out and it worked great.
How did you get that broken piece out?? The bottom of the he nozzle broke off down inside of the hose where it connects. Do you know how to get that out?? I can't get it out...
@@loricookjohnson5033 If you are talking about the plastic in the hose all I did was crunch it up and use a flat head screw driver to scrape it out. Then hit the sprayer to wash out the debris before you push in the new one.
Thankyou Bryan from Chilliwack BC Canada. I just replaced both of mine in minutes, thanks to your video.
Thank you! This was just what I needed. I was hoping I could just fix it myself and not have to take it in to the mechanic.
lol that animal rolling like crazy
And my heart dropped when you put those pair of pliers on your nice shiny paint ouch LOL
Thanks for the video. Very helpful. The drivers side is broken on my Ram 1500. I'm going to just replace both of them. I got a couple on Ebay. Thanks again.
It helped me out in 2022 , Thank you
Thanks man, really simple, I did it with a multi tool. Old nozzles Shattered when I removed em but for a 12 year old dodge Magnum. i consider that great!!
I just wish you showed the actual work instead of showing the top of your hood. But it helped enough I can go try it. Thanks.
thank you very much man!! U saved me a trip to the dealership in less than 40 seconds
Thanks I made the dumb mistake of scraping ice off and it broke so now I know how to replace it. Seems super easy.
Wonderful! I'm on the way to parts store to pick 2 new nozzles at Car Part Warehouse for$3.89! Great video! FRA Cleveland ,Ohio.
I need to replace a spray nozzle on a 2006 Charger, this video is perfect. Thanks!
I paid $6.24 out the door on EBAY for 2 of those nozzles. My local auto parts store wanted $24.95 for 2.
Thanks man, really helpful I was thinking it was a electrical problem. It's just the nozzle
Great video. Good text over the video at the beginning to clarify that you don't need to crush it :)
Would be nice if it was shown how to loosen the insulation pad from the hood so that one can access the washer lines and nozzles without ripping it apart
Thanks you so much...this really helped me..probably saved me £100 quid in the uk 😊
Thank you so much from Vancouver, Canada too! Your 'How-
to-video' is just what I needed. I have a black 2010 Charger SRT8 which lost a small part of the driver's side nozzle. Was told by Lordco & others that the part was only available through the dealership. Cost was about $40 Cdn total for just one, made in Mexico & shipped via Toronto. I will install it this weekend thanks to you!
By the way, where did you pick up your steering wheel? Or was it stock?
Also have you had any problems with condensation in your headlights? My seals must be gone but I've been holding off replacing them due to $$. Last year my mechanic ordered the wrong ones that didn't fit. Any other new, cool headlights that you've considered for your Charger? Any suggestions or info appreciated.
you made it look so easy
Thank you, it works the same for the Dodge Caliber, just to let people know.
Bryan, I really enjoyed your video, lots of great advice!! Thanks
Thanks for the quick fix vid. I appreciate it.
Thanks a million. I'm now capable to repair it by myself!
Dude thanks my tube was loose I was just about to go to a shop lol thanks for helping
Glad that's a easy fix I just and a horse bite one of those off this morning on my caliber and that part is cheap for the model I have.
Replaced mine but one was spraying hard left and not hitting the window so I used a pin needle tool to adjust the aim towards the center of the window.
Thanks for the info. I broke one of mine loose yesterday while waxing.
Thanks . Having this problem with my 05 Grand Cherokee.
Thanks very helpful. I did it my self, almost took my RAM to the car dealer. They probably would've charged me $150.00 LOL. Thanks
don't ever again DISRESPECT a charger by putting the pliers on the painted fender again, but the rest was cool
+Mr. & Mrs. S. VANEVERY A-men! Video was helpful but it hurt me when those pliers hit the fender.
+Mr. & Mrs. S. VANEVERY sorry guys, no scratches were created in the making of this video.
NuclearY Atomz anti freeze is corrosive
I immediately cringed!
Mr. & Mrs. S. VANEVERY its a v6, who cares
finally found a video that shuts up and doesn't talk as much to do a simple job. 🤣🤣🤣
From the other videos all you hear is Blahh blahh blahh blahh blahh blahh blahh.
Yea just broke mine had to brake all them f in clips that hold that liner up thanks for the video
That dog stole the show 😆
thanks for the info it really will help
Thank you for this, just saw your video to get some off a Dodge truck. This is what TH-cam is awesome for. #fadetoblackllc
Thanks for the video 👍🏾
Thanks, I just didn't know. Ah, you put the pliers on the metal paint job of your car. Ouch.
Rock Auto had the nozzles for my '12 Journey for $8.97 each and the washer hose for about $10. Paid $10 for shipping for next day delivery.
awesome video...Thumbs up 10x
I like this playing dog ....
thanks, Nice background music.
Nice video, need to replace mine.
Could you send the link to the nozzle you bought
Very helpful. Thank you.
Lokijuh Unknwn No problem! Thanks for watching!
Hey Bryan Keller. If you don't mind me asking, were did you get the rubber T (yellow) from? I'm having a hard time finding one. My 2012 Dodge Charger came with a Y rubber spliter and it seems that the washer nozzle is at an angle, not straight up and down. Can you help me out?
So after you buy the new ones and replace the old ones and try them out but they’re spraying over the top of the windshield….how do you adjust them? 😳
Thx for posting!!
I switched out mine, and now they’re shooting over the windshield and they don’t appear to be adjustable. I have no idea how to fix for them now.
What happens when one works but the other one doesn't I need help plz my car is a Dodge durango
not the same as challenger..... I also love using my hood as a rusty tool box
What is that yellow part called you connect the hose to
Is there a rebuild kit available for these things?
Good stuff.
V. helpful!
Thanks!
This is a really good video of the back of your head, but how do I replace the nozzle?
Thanks
how do you adjust the sprayers? mine are new mopar but not spraying where they need to
You usually put a thin needle into the nozzle hole and adjust it up or down
song? is it by mutemath?
Thankfully my 2001 Toyota Camry hid the washer reservoir behind the fender and next to thewheel well yay me FML
Yeah crushed mine without any pressure
$9.99 plus 2.99 shipping. Rock Auto.
dont need to take off heat shield cool
I'm just tryna takem out so I can wrap my hood
thanks it really simple
+RICHARD LOPEZ No problem! Glad you liked the video!
How so you take the insullation off? The pastic that holds it is a bitch to take out
victor ventura if you don't have the tool to pop the plastic clips you can make one out of a kitchen fork. Just spred the fork open with pliers in the middle and they make great pullers.
Türkçe "yedek parça" as bayrakları as as as !! :D
why do people do this ....get someone to hold the camera......
Pl
Go on rockauto.com for car parts
Why am I looking at the top of his head ? ? The whole idea was to watch as the job got done. Sorry, but complete fail.
Of all the places to set em, you set this massive pair of pliers right on your fender.. OMG. I cringed.
And why wouldn’t you just pull your insulation tabs and show everybody what’s going on under there. If you’re gonna make a true instructional video.
thanks