Interesting! This is almost exactly my same setup. I didn't bother looking for a case that made efficient use of my shortened, 3 card slot GPU. This could be the way to go!
4.0 riser cable didn't work for me. Now I have to wait 3 weeks for a 3.0 riser cable. I would get both to ease the hassle. I bought a 3.0 from microcenter but it doesn't mount to this case.
Currently i have this case with the 500w psu. i run it with a i5 10400 with a noctua nh-l9i and 1650super, the noctua produces the most noise for me, after that it would be the gpu. My estimated wattage is 220w so it doesn’t push the psu that hard especially because its rated 500w. Im definitely satisfied with the noise level
I really wish there was some kind of cover for the bottom so you could lay it flat with the cables coming out the back, otherwise its a very sweet case
If you plan to do it, I strongly recommend Corsair lpx. Other rams are too tall. Just follow some youtube videos for removing the existing ram heatsink. You will need a heatgun.
I have a question, can any motherboard fit into this case? If not may you show me a motherboard that supports intel core i7 gtx 1070 that can fit into this case…
Awesome build! Im at the process of gathering my components for the same build in white. Just wondering, do you think the Zotac 3060ti white is able to fit in the gpu slot?
@@xJets1 you dont have to order the pcie if you have your own, but i would highly recommend getting the one that they sell with the case. It is made to the exact length needed to fit this case, the one in the video is the one that comes with the case if you buy from them.
@@lys19931030 ok i was just wondering ive also noticed that most cases dont have airflow on the back side on the case motherboard and they said a m.2 ssd would be fine but i was just curious
5600x doesn't consume much watts, so 500w should be enough. I don't use high end hardware, so I usually don't bother benchmarking the temp. The 5600x could be a bit hot, but not to the point that it will lower its frequency.
@@jccnguyen your absolutely right. You can run 3060 Ti & 5600X on 350W Gold, although that's right at the edge depending on what your doing. 400W is fine for everything with some head room.
Thank you for the video. It’s very nice and helpful 🙏 Can you comment how many 2.5” SATA SSD’s and M.2 NVMe drives the case can hold in total when a dedicated GPU is installed, and when it’s built without a dedicated GPU?
If I remember correctly, it supports 2 * sata ssd's. ITX motherboards normally supports 2 m.2 ssd's with one to the front and one to the back, but the installing the one to the back is usually not recommended due to the limitation in heat dissipation. The latest z690i motherboard may support one more m.2 ssd to the front. I'm not sure about the config without a dedicated gpu.
Nah only cable i have is the single display port out the top. Wireless headset and mouse dongle are plugged in at the top. Key board plugged in the front and the psu cable goes out the back. Also you can buy a right angle adapter that is super slim from the website and run it under the handle out the top and out the back, also mini wifi antenna that are 1inch tall because i don’t have ethernet. Its not that hard to remove the clutter at the top actually
And it sits right next to my monitor on the side where the display port goes, so the 1.5ft braided cable is the perfect length+looks pretty cool actually
Starting to really love ITX builds recently. So much that i actually got a xtia xproto-N. Can't wait to build it. Great video!
Me too!
Lovely!! No music, pure pleasure
Abosolutely satisfying to watch. Cant wait to build my Xproto ATX v2
This was my favorite pc build in a while. Great job.
thanks for not putting annoying music over it
I love this case. I wish the mobo was flipped or something, wires coming out of the top doesn't look good to me.
Xproto flip module will solve your problem
Interesting! This is almost exactly my same setup. I didn't bother looking for a case that made efficient use of my shortened, 3 card slot GPU. This could be the way to go!
Nice paint job on the motherboard. Subbed 😊
being available on taobao is pretty awesome, everyone can buy it without the hype, probably gonna get one for my first sff.
Do you know how much the Xproto ATX costs on taobao?
On aliexpress I found it for $220 plus $80 for shipping
@SunLikeLamp com Thanks! I wish I could buy it for that price 👍
no, this is an asmr video, you should add the word asmr to the title
Great build.. im planning to build with that case.. could you please upload some brolls/montage? Thanks.
looks great
Wow i just ordered one of these
Nice case for sure ;）
That a beautiful pc
4.0 riser cable didn't work for me. Now I have to wait 3 weeks for a 3.0 riser cable. I would get both to ease the hassle. I bought a 3.0 from microcenter but it doesn't mount to this case.
How is the noise level on the psu? I have the same GPU with a R5 3600. Considering moving my build from my Dan A4.
noisier than sfx, but OK for me. 0 rpm under low load.
Currently i have this case with the 500w psu. i run it with a i5 10400 with a noctua nh-l9i and 1650super, the noctua produces the most noise for me, after that it would be the gpu. My estimated wattage is 220w so it doesn’t push the psu that hard especially because its rated 500w. Im definitely satisfied with the noise level
Can you build towers?
I really wish there was some kind of cover for the bottom so you could lay it flat with the cables coming out the back, otherwise its a very sweet case
Agreed. It should be possible to 3d print a bottom cover.
did you buy the xproto ram cover slot and replace them to the og cover, right, is it hard to do with that? looks so nice.
If you plan to do it, I strongly recommend Corsair lpx. Other rams are too tall. Just follow some youtube videos for removing the existing ram heatsink. You will need a heatgun.
@@AesthYT thanks for the replying, yeah, i am considering with lpx and ripjaw, they are quite similar tall with each other.
too much noise in the mic, what´s going on with that frindge in the background? Good video 10/10
Does the Xproto Flip Module work with the Xproto-Mini?
Razer PCI express 3.0?
Is there a USB-C front panel available for the Xproto-Mini?
I have a question, can any motherboard fit into this case? If not may you show me a motherboard that supports intel core i7 gtx 1070 that can fit into this case…
does this case fit with FSP Dagger 650w Pro?
Awesome build! Im at the process of gathering my components for the same build in white. Just wondering, do you think the Zotac 3060ti white is able to fit in the gpu slot?
yessss
이거 한번 만들어 봐야지!
Do more cut on your video please ! That will be more pleasant to watch
i've been looking for those open skeleton aliexpress cases for cheap... now this has poison my thoughts lol
could this fit a 280mm x63 kraken AIO?
Need to get some sexy broll shots in there in future
Thanks for your advice
Did it come with the power supply? Nice af build! 💯
no, purchased separately
You can order it with a 500w power supply and a pcie 3 cable and it will cost 208$
@@nrg7730 Do you need the pcie? Or can that come separately?
I’m a new builder so don’t know if I should order it or not
@@xJets1 you dont have to order the pcie if you have your own, but i would highly recommend getting the one that they sell with the case. It is made to the exact length needed to fit this case, the one in the video is the one that comes with the case if you buy from them.
@@nrg7730 Ok I will thanks
You think if i put an added an ssd on the back slot of the motherboard it would be too hot since there isnt any air flow back there?
yes, it's going to be too hot. The case support 2.5 inch ssd between the two spines btw (which shouldn't overheat).
@@lys19931030 ok i was just wondering ive also noticed that most cases dont have airflow on the back side on the case motherboard and they said a m.2 ssd would be fine but i was just curious
Recommended wattage for the 3060 XC is 550W but you're using a 500 PSU? Also, how are the temperatures with the 5600X, I hear they run hot?
5600x doesn't consume much watts, so 500w should be enough. I don't use high end hardware, so I usually don't bother benchmarking the temp. The 5600x could be a bit hot, but not to the point that it will lower its frequency.
Here's some low profile cooler temps for 5600X: th-cam.com/video/1cd9q_QssXg/w-d-xo.html
People are obsessed with psu wattage, I can run 5600x + 3060 with my 450W bronze just fine with plenty of headroom
@@jccnguyen your absolutely right. You can run 3060 Ti & 5600X on 350W Gold, although that's right at the edge depending on what your doing. 400W is fine for everything with some head room.
awesome build, but wouldve stayed all black with the mb , or bought the white xproto mini
The whilte xpm was released a few months after I uploaded this video. If it were released earlier, I'd go all white :)
Thank you for the video. It’s very nice and helpful 🙏
Can you comment how many 2.5” SATA SSD’s and M.2 NVMe drives the case can hold in total when a dedicated GPU is installed, and when it’s built without a dedicated GPU?
If I remember correctly, it supports 2 * sata ssd's. ITX motherboards normally supports 2 m.2 ssd's with one to the front and one to the back, but the installing the one to the back is usually not recommended due to the limitation in heat dissipation. The latest z690i motherboard may support one more m.2 ssd to the front. I'm not sure about the config without a dedicated gpu.
@@lys19931030 thank you very much 🙏🙏
Is it possible to tell how big are the holes on the mesh in mm
diameter of mesh holes is about 2mm, diameter of the screw holes on mesh is about 3mm.
2.5" SSD / Harddisk placement?
I didn't use, but you can place it in between the two plates.
@@AesthYT I see... thanks for the info , been looking for the answer hehe
Where can I get a metal mesh sheet like that
I bought from Xproto's Taobao store, but I believe it's also sold in the link in the video description.
What Is the Total price Of the build?
all the parts are listed. you can calculate.
쌌다..가버렷..
Can you link me where to buy that psu. I can find a modular one from Amazon or in the us :/
It's sold by xproto store at Taobao.
@@AesthYT Are you from the US how did you buy it because it woudlnt let me buy it :(
@@Alvin-mz4wt I'm Chinese living in the US (usually you need Chinese citizenship in order to use Taobao, unless you use agents such as Superbuy.
@@AesthYT sorry one more thing, how come you didn't get the 600w? "white yiheng 7660b full module ute cheng build standard" does it not fit
@@Alvin-mz4wt haven't' tried yiheng yet. not sure if it fits or not.
my dream pc but with 3070 instead
plug all the needed cables on it, it will turn out .. ugly ;)
Nah only cable i have is the single display port out the top. Wireless headset and mouse dongle are plugged in at the top. Key board plugged in the front and the psu cable goes out the back. Also you can buy a right angle adapter that is super slim from the website and run it under the handle out the top and out the back, also mini wifi antenna that are 1inch tall because i don’t have ethernet. Its not that hard to remove the clutter at the top actually
And it sits right next to my monitor on the side where the display port goes, so the 1.5ft braided cable is the perfect length+looks pretty cool actually
@@nrg7730 show your build chicken