How about the dust? How often do you need to clean? And is this loud (since there is no external case to stop the sound)? Sorry for asking so many Qs, really wanna buy this case! Thx
@@GameAlan83 no problem man , dust would get accumulated on heatsink quicker than usual ofcoz but doesn't even take 2 mins to clean up for me , sound is depends on which fan you are using , mine is dead silent when idle with P12 max on IS67XT , most of the time sound comes from GPU when load on gaming but it's acceptable for me ( make sure your gpu fans no whinning ) . Also FYI nowadays cases doesn't block any sounds especially with alot of ventilations panel for example like NR200 is totally same with any open-case
How about the dust? How often do you need to clean? And is this loud (since there is no external case to stop the sound)? Sorry for asking so many Qs, really wanna buy this case! Thx
Hello Do you by chance know what motherboard gold stand off screws size those are? I have lost mine during a build and need more, i just cannot find the size on the xproto website😊
I know this is pretty stupid to ask but on the motherboard standoffs, did you use the shorter or the taller ones? my screw box got unorganized and I can't figure out which is which for the labeling :(
The shorter one was used on the motherboard side, and the slightly longer one was used on the part where the riser card was installed. (When the motherboard is temporarily placed after the stand-off is installed, the height of the rear IO port can be seen to determine if it is the right height.)
If your CPU cooler uses a PC case with no height restrictions, you can use a normal CPU cooler. Sometimes, for older CPU coolers that are not compatible, there may be interference in the M.2 slot of the ITX board, so that's all you need to do.
Basically, we only supported SFX-sized PSUs, but it seems to have been changed recently to support ATX-sized as well. I don't think I need to worry about a separate bracket.
damn thats a great choice i can assure you , im using this case as well , easy to clean and has the best performance
How about the dust? How often do you need to clean? And is this loud (since there is no external case to stop the sound)? Sorry for asking so many Qs, really wanna buy this case! Thx
@@GameAlan83 no problem man , dust would get accumulated on heatsink quicker than usual ofcoz but doesn't even take 2 mins to clean up for me , sound is depends on which fan you are using , mine is dead silent when idle with P12 max on IS67XT , most of the time sound comes from GPU when load on gaming but it's acceptable for me ( make sure your gpu fans no whinning ) . Also FYI nowadays cases doesn't block any sounds especially with alot of ventilations panel for example like NR200 is totally same with any open-case
Thank you for posting this video 🎥🍿🍺🇺🇸. You have a new subscriber 🎉. Keep up the great 👍 work 🎉.
:D currently saving on some parts but I also ordered that case and I love it
How about the dust? How often do you need to clean? And is this loud (since there is no external case to stop the sound)? Sorry for asking so many Qs, really wanna buy this case! Thx
발열관리 끝판왕이로군요.
this is gonna be my next build since im downsizing
Beautiful build.
Hello
Do you by chance know what motherboard gold stand off screws size those are?
I have lost mine during a build and need more, i just cannot find the size on the xproto website😊
무한리터는 L이나 mini나 똑같이 빅이죠
ㅋㅋㅋ
Now assembling the XProto L V2 and I'm so worried about the bend of the pcie Riser cable
(Yours looked pretty fine/easy to mount)
you can bend it pretty good i didnt struggle, i was more worried about the power cables bending so aggressively
오픈형이라 CPU 쿨러 두께에서 타협을 볼 필요가 없음에도 불구하고 LP를 선택하신 이유가 있을까요?
하루종일 3D 렌더링 돌린다면 3열 수냉이 적합하겠죠?
큰이유는 없고 외형적으로 보여지는 완성도 때문에 LP쿨러를 사용했습니다.
저는 실사용에있어 공랭이랑 수랭 큰차이를 못느껴서 주로 수랭쿨러보단 공랭쿨러를 선호하기에 쿨러에 맞게 CPU를 전성비 세팅하여 시스템을 빌드합니다.
전력제한 해제나 오버클럭까지 염두하신다면 수랭쿨러로 가시는게 맞습니다.
Perfect assembly. Where can I find these wifi antennas?
Search RHCP Micro FPV Antenna on Google and you'll find it.
I know this is pretty stupid to ask but on the motherboard standoffs, did you use the shorter or the taller ones? my screw box got unorganized and I can't figure out which is which for the labeling :(
The shorter one was used on the motherboard side, and the slightly longer one was used on the part where the riser card was installed.
(When the motherboard is temporarily placed after the stand-off is installed, the height of the rear IO port can be seen to determine if it is the right height.)
영상 잘 봤습니다! :)
파워를 꼭 저 방향으로만 설치해야 되는게 아니라면.. ATX 파워도 사용이 가능해보이네요?
케이스 국내 구매가 가능한가요?
ATX파워 사용가능합니다. 구매페이지 보면 ATX파워 장착한 사진도 있었습니다. 해외 직구로 구매하셔야합니다.
시이이이입!!!!!리터어어어ㅓ어어ㅓ!!!!!이상은!!!!!!!
I'm confused as to why a 150W cooler is being used on 170W chip. Why not just use a bigger cooler if it is an open-air case?
There's no big reason, and the way it sticks out too much is aesthetically bad, so I've seen a little compromise.
music (:
do those mini ITX mainboards require special CPU fan sizes? or can i just take any regular one
If your CPU cooler uses a PC case with no height restrictions, you can use a normal CPU cooler. Sometimes, for older CPU coolers that are not compatible, there may be interference in the M.2 slot of the ITX board, so that's all you need to do.
wait im losing front panel IO with this case
Lovely,
What are the antennas and what is the cpu termal pad?
Theramlight AM5 Frame and RHCPFPV 5.8G antenna models.
@@DalraeMyo thanks so do the drone antenna actually work for motherboard?
Everything worked well in close-range situations.@@WinterSina
4070ti 프로아트 팬 소음 어떤가요?? 볼베어링 소리가 들리나요? 궁금하네요.
ASUS RTX 40시리즈는 스트릭스/터프/듀얼OC와 동일한 쿨링팬이라 제로팬 해제시 특유의 잡음은 없습니다.
so it comes with the correct bracket for a SFX power supply
Basically, we only supported SFX-sized PSUs, but it seems to have been changed recently to support ATX-sized as well. I don't think I need to worry about a separate bracket.
@@DalraeMyo ok cool i ordered it im excited about buidling in the case i have a SFX power supply so i wondering
What are those black caps you screwed onto the WiFi antenna IO slots?
Mini WIFI/BT antenna. Search Google for RHCP 5.8g antenna and you'll find it.
@@DalraeMyo thx a lot, this was very helpful
What are your PBO and Curve Optimizer settings?
You can refer to the video below.
th-cam.com/video/OKi-cSZw8O0/w-d-xo.htmlsi=2XDADph-XfHqLrp0&t=527
I like this open build, but i will need new vacuum cleaner.
Small air purifier on the desk helps with dust 👌🏼
how long roughly are your pvc custom cables?
The custom cable lengths I recommend are as follows.
CPU : 30~35cm
M/B : 15~20cm
VGA : 30~35cm
라이저 길이가 어느정도 인가요? 알리 미니섀시 18.5로도 될까요?
공식홈페이지 기준으로 21.5cm라고 명시되어있습니다.
Is there any problem with static electricity?
There was no particular problem.
v2 가 새로 나온 것 같던데 이건 v1 이죠?
저는 중고로 구매한거라 아마 v1인거같습니다.