Another exciting project! Great photography, the angles you get are so cool. Plus you are a handsome youngin. Thanks for sharing! Peace and love..Suz What ☮️💛
Yonaka does the same hubs with arp for $265 for future refrence. Should have converted to an EX knuckle so I had 43mm bearing and could run 262mm rotors.
@@boosted_john i ended up making 230/190. i dont see how you wouldnt hit that 215-220 mark. if you dont, look into adding a 50 degree vtc, type s oil pump, and opening up the exhaust a little more. you may end up having a hard time selling it when you're all done because you'll enjoy it so much
@@boosted_john been a subscriber for a while now, but i just followed you on my k swap IG page. ive got a silver civic as well. check it out if you want to! keep up the videos man. always enjoy watching them.
Hey John if you can’t find a decent hood I can take a drilled, dented, cracked up one and make it look brand new again! I just got done doing a bunch of body and paint work on a buddies turbo d16 ek that is the same color as your k swapped one and it turned out amazing. Only thing that sucks is I’m like 3-4 hours north of you
This is most likely what I’m going to do. Just gotta make sure that I can at least trim an OEM hood to clear the intake manifold. If I can, then I’ll get a carbon one and trim it as well. Also, I have an oem hood for the car now. Just gotta mount it and play with fitment. Almost ready to bite the bullet and get a carbon one.
What happened to the auction? I put money into an account that would allow me to bid on the civic you were going to auction off. And now nothing?? Kind of frustrating man. Just saying.
Unfortunately it didn’t work out man. I talk about it in this video. Everyone that entered has been refunded. Sorry for the inconvenience and I hope you understand.
Did you say $5000 for a non properly running k24 in ek coupe?? $500 for no motor non EX shell, $950 motor, $1500 for rsx type s 6 speed trans (which that isn't) , $2000 in misc. Not even on kpro or hondata.......The math ain't mathing at least for a flip. And we have some of the most expensive asking prices for honda's here in the Seattle area. Must be a location thing. Shells like are all over here for less than $1000 with the blown motor still in it.
Good stuff John. Glad to finally see this thing get more screen time. Hope a channel member buys it and appreciates it.
im so hyped to see this flip series!!!!
Another exciting project! Great photography, the angles you get are so cool. Plus you are a handsome youngin. Thanks for sharing! Peace and love..Suz What ☮️💛
It's been awhile I haven't been in the comments, here from Jamaica. Let's goooo✌️
Yonaka does the same hubs with arp for $265 for future refrence. Should have converted to an EX knuckle so I had 43mm bearing and could run 262mm rotors.
i have a 2000 civic coupe with a k24a2/z3 trans, rbc manifold, dtr header, and 3" catback. it absolutely rips and is the most fun ive had in a car.
This is epic feedback. Your setup is definitely more optimized than mine, but hoping to make like 215-220whp.
@@boosted_john i ended up making 230/190. i dont see how you wouldnt hit that 215-220 mark. if you dont, look into adding a 50 degree vtc, type s oil pump, and opening up the exhaust a little more. you may end up having a hard time selling it when you're all done because you'll enjoy it so much
@@boosted_john been a subscriber for a while now, but i just followed you on my k swap IG page. ive got a silver civic as well. check it out if you want to! keep up the videos man. always enjoy watching them.
I been debating on whether or not to k swap my ek. Depending on the results i may do it. Can't wait to see the end process. Good luck man
John .. we love you 🥹
I got my shirt in today!!! It looks so sick and thanks for the lil goodie!! Keep it up John you da man!! 👊🏽🔥
🤝🤝🤝
That engine is so clean! Love the music. LY ❤️
Thanks mom! LY
Time to keep up the success and have 20 pairs of vans like Adam lz and Jimmy oakes.
Impressive work on the K24 swap! 🚗💨
This series is going to be good!!!!!!❤❤❤❤
The dedication makes you want to go climb a mountain
I am working on a JDM k24a swap into an ES1 and was hoping for some k series content. Excited to see this.
Well that will be a unique build. I've seen more em2's lately but not a 4 door. Cool!!!
How did you make that bearing press ??
Hey John if you can’t find a decent hood I can take a drilled, dented, cracked up one and make it look brand new again! I just got done doing a bunch of body and paint work on a buddies turbo d16 ek that is the same color as your k swapped one and it turned out amazing. Only thing that sucks is I’m like 3-4 hours north of you
Hey! I have a hood for the car, that’s a bit beat up. Only problem is that it’s black.
I love these vids
Ayy let’s go!
Got a 96 midori green hatch with a K20A2 swap for 4500 last year 🤑 drove it for 2 months and sold it for 7400 lol
Bro congrats on the shoes but idk about your or I’m getting old I can’t wear vans anymore 😂 shit hurts
I have a k24a2 paired up to a 05 rsx 5 speed in the same chassis, will i also need the hub adapters to run axles ??
You can get 32mm k series axles from yonoka I think.
There are a few companies that make them.
Lets gooooooooo
You should build a twin turbo honda odyssey... pretty plz🥺
The lawnmower 😂
What about the brake dust shield though? 🤦♂️
What about it?
They can handle about 400 horsepower Safely I believe
cant wait to bug on the phone
Carbon hood ❤
This is most likely what I’m going to do. Just gotta make sure that I can at least trim an OEM hood to clear the intake manifold. If I can, then I’ll get a carbon one and trim it as well.
Also, I have an oem hood for the car now. Just gotta mount it and play with fitment. Almost ready to bite the bullet and get a carbon one.
Enjoy your new shoes.
#earned
Another banger, keep killing it bro!
Get rid of the eg ..keep the ek
Never
Negative! I’ve had mine for 22 years. 1997 civic ex coupe. B18b1 turbo. Hellcat killa…a.k.a. Black Betty
Do a giveaway!
What happened to the auction? I put money into an account that would allow me to bid on the civic you were going to auction off. And now nothing?? Kind of frustrating man. Just saying.
Unfortunately it didn’t work out man. I talk about it in this video.
Everyone that entered has been refunded.
Sorry for the inconvenience and I hope you understand.
Did you say $5000 for a non properly running k24 in ek coupe?? $500 for no motor non EX shell, $950 motor, $1500 for rsx type s 6 speed trans (which that isn't) , $2000 in misc. Not even on kpro or hondata.......The math ain't mathing at least for a flip. And we have some of the most expensive asking prices for honda's here in the Seattle area. Must be a location thing. Shells like are all over here for less than $1000 with the blown motor still in it.
Not possible to find that near me.
Yohner
Broder
After this build/ flip I foresee you John swapping the white EG hatch to K series.
🫰🏽🤙🏽
33sec no views you fell off