thanks so much for this tutorial! I was getting fed up with my radio, because I like arming with a switch but I wanted to have more than one mode so i could have a beeper and such on my mini quad. Now I don't have to buy a new radio! awesome
I don't normally comment on videos, but I just had to say thanks for the video as it was a great help. I do have a question though, is there a way of reversing the switch function. My STAB mode is in the switches '1' position and ACRO is in '0'.
Is it possible to get 4 modes on one channel and 3 modes on the other? I'd like to set channel 5 to my APM mode selector and channel 6 to my gimbal tilt.
legerstee1 So it seems like I should be able to have 3 values on both aux channels when I use a single mix for each channel? That way my gimbal control switches would have up, down and stop and my mode control switches can have 3 different modes: Stabilize, Loiter and Failsafe. Does this sound plausible?
I get what you're saying, but I have never been able to get that to work. I have now changed over to frsky so I cannot try or look anymore for you... Sorry
nice video man ! and the gear switch can be used for alarm ! I don't now why spektrum makes 7 switches on this radio I think better will be when spektrum makes 1 3- position switch. But your video is perfect
How can I set an accessory switch? when I sart the transmitter wizard, it does not recognize any of the accesory sticks, it does recognize the gear channel but I already use that for my attitude/rate mode. Could you tell me how to set/setup an assecory stick on my Dx6I?
ja ik ben nederlands haha, ja ik heb nu een cc3d en ik moet een accessory switch hebben zodat ik mijn buzzer erop kan doen, alleen het probleem is dat hij al mijn switches niet herkent, alleen de gear channel die ik gebruik voor attitude/rate mode. maar ik heb dus ook nog 1 accessory switch nodig, weet jij hoe ik dat instel ? ik heb werkelijk geen idee...
Dat is je flap switch wat bij spektrum aux1 is op de receiver. Ik heb inmiddels geen spektrum meer maar frsky, dus kan helaas niets meer bekijken/opzoeken. Succes!
thanks so much for this tutorial! I was getting fed up with my radio, because I like arming with a switch but I wanted to have more than one mode so i could have a beeper and such on my mini quad. Now I don't have to buy a new radio! awesome
You're very welcome! Happy I could help :-). Have fun!
Great video mate
Just what I needed... perfect thanks!!
J Somers thanks for your response! Great I could help :-)
You just saved me $130. fucking brilliant, thank you!!!
Cinanni_FPV thank you! And am happy that I could help :-). Cheers!
legerstee1 got any tricks to expand the functionality of the channel 5 switch?
Cinanni_FPV sorry, no, I also don't have that radio anymore... Good luck
I don't normally comment on videos, but I just had to say thanks for the video as it was a great help. I do have a question though, is there a way of reversing the switch function. My STAB mode is in the switches '1' position and ACRO is in '0'.
Hi thanks! I don't have this radio anymore so I have to ask other watching this video to perhaps help you. Sorry! And good luck!
thanks man , great video helped me out big time !
Thank you! you're welcome!
Is it possible to get 4 modes on one channel and 3 modes on the other? I'd like to set channel 5 to my APM mode selector and channel 6 to my gimbal tilt.
WhiffleX I'm not sure if i totally get your question but if i think what it is than the answer is no :-) ;-)
legerstee1 So it seems like I should be able to have 3 values on both aux channels when I use a single mix for each channel? That way my gimbal control switches would have up, down and stop and my mode control switches can have 3 different modes: Stabilize, Loiter and Failsafe. Does this sound plausible?
I get what you're saying, but I have never been able to get that to work. I have now changed over to frsky so I cannot try or look anymore for you... Sorry
thank you for the tips :)
where did you buy the stick? il love it!
nice video man ! and the gear switch can be used for alarm !
I don't now why spektrum makes 7 switches on this radio I think better will be when spektrum makes 1 3- position switch.
But your video is perfect
Thanks! Indeed! I have switched to a taranis by now ;-). Thanks for the like
no problem :) make more videos like this :)
How do you get the switches to do something?
Sorry I can't help you anymore, I don't have this tx for 8 years anymore. Anyone else?
How can I set an accessory switch? when I sart the transmitter wizard, it does not recognize any of the accesory sticks, it does recognize the gear channel but I already use that for my attitude/rate mode. Could you tell me how to set/setup an assecory stick on my Dx6I?
Maurits Veerman I think you have to manually select them. Are you dutch? (looking at your last name! ;-) ), anders kan Nederlands praten ook ;-)
ja ik ben nederlands haha, ja ik heb nu een cc3d en ik moet een accessory switch hebben zodat ik mijn buzzer erop kan doen, alleen het probleem is dat hij al mijn switches niet herkent, alleen de gear channel die ik gebruik voor attitude/rate mode. maar ik heb dus ook nog 1 accessory switch nodig, weet jij hoe ik dat instel ? ik heb werkelijk geen idee...
Dat is je flap switch wat bij spektrum aux1 is op de receiver. Ik heb inmiddels geen spektrum meer maar frsky, dus kan helaas niets meer bekijken/opzoeken. Succes!
I set mine up like this but the flap switch doesn't do anything.
Make sure act for flap is also active.... Sorry can't Check it anymore, I have changed to frsky. Good luck!
legerstee1 Ok, thank you.
Sup bro. Can you help me bind my inductrix pro to dx6i im struggling plz help
juneloko619 loera happy to help but best thing is to Check the manual of the receiver..
top man top video really helped me out thanks
luke Turff you're welcome!
Very nice! Thank you!
Thanks!
Thank you for this!
My pleasure! And thank you for the quick note :-)
my switches wont do anything.
thanks i also want 3 switch for APM 2.8 but yet not checked :)
Thanks!!
Your welcome! Have fun!
Thank You ;)
Sandor Kiss thanks! happy I could help