Hello I hit my 2018 x4...screen it didn't crack....But it blacked out like a cell phone would do....Now I can't read anything on my car...Can you please recommend a replacement....
So far this is the worst stereo Ive ever had, I dont know why BMW made it to where you couldnt replace the stereo with a double din, these bmw radios have no output jack or anything to install a sound system. Aint no way Im paying 800-1k for a stereo yes I get it does much more than just play music
I've purchased a replacement screen for my 2015 F30 and it is an exact replacement (I have the 8.8" screen from factory). The trim came off fine, and the screws are removed, but the wire running to the original screen that it will barely lift an inch off the dashboard. Nothing else is holding it. The wiring harness is extremely short. I can't turn it around or get behind it to disconnect the wires. Any advice would be appreciated.
I was able to solve this issue. I have the Harmon Kardon head unit and navigation built in. The wire from the head unit is much shorter than in the video. I had to take off a few more pieces of trim and loosen the head unit to move it forward without disconnecting it. This gave slack in the cable so I could swap the screen. It's a few more pieces of trim, and T20 screws but not a big deal.
Same issue for me with a 2013 F30, I was still able to locate the tiny releasing clip without seeing it (i.e. using fingertips), push it in and use a screwdriver behind the cord to pop it out similar to how he does it at 2:50 in the video, you can put the tip of the screwdriver behind the cord metal piece and pull the screwdriver handle towards you to pop out the connector. I also took a picture of the cord connector with my phone to see what it looks like and where the releasing clip is.
2017 BMW x3 idrive screen is black. Doesn’t turn on at all. Tried to reset it with the volume button and battery disconnect. Will this fix that or could be another issue?
i have 2010 E84 x1 i upgraded screen from 6.5" to 8.8" the screen double images so i read i need to change 2 coes . 3000 HMI * DISPLAY_SIZE_RESOLUTION = 8.8_1280x480 and 3001 EXBOX * DISPLAY_VARIANTE = breites_display however on bimmercode i cannot see 3000HMI to alter the resolution so im not stuck what can i do and why cant i see the option ?
If my current screen is like this one, an 8.8" screen already, and it is sun damaged, if I replace it with a second hand identical screen, will it require coding? or any extra process to make it work?
Hi I have 2015 F20 NBT idrive needs to repalce the screen. Should I recode to match to my current car? The other screen is an identical screen second hand from donor. Thank you
www.bimmer-tech.net/page-installers - here you can find our installer in Sydney, but we don't guarantee him doing it, because the screen replacement is not from our shop :)
Hello I hit my 2018 x4...screen it didn't crack....But it blacked out like a cell phone would do....Now I can't read anything on my car...Can you please recommend a replacement....
So far this is the worst stereo Ive ever had, I dont know why BMW made it to where you couldnt replace the stereo with a double din, these bmw radios have no output jack or anything to install a sound system. Aint no way Im paying 800-1k for a stereo yes I get it does much more than just play music
I've purchased a replacement screen for my 2015 F30 and it is an exact replacement (I have the 8.8" screen from factory). The trim came off fine, and the screws are removed, but the wire running to the original screen that it will barely lift an inch off the dashboard. Nothing else is holding it. The wiring harness is extremely short. I can't turn it around or get behind it to disconnect the wires. Any advice would be appreciated.
I was able to solve this issue. I have the Harmon Kardon head unit and navigation built in. The wire from the head unit is much shorter than in the video. I had to take off a few more pieces of trim and loosen the head unit to move it forward without disconnecting it. This gave slack in the cable so I could swap the screen. It's a few more pieces of trim, and T20 screws but not a big deal.
Same issue for me with a 2013 F30, I was still able to locate the tiny releasing clip without seeing it (i.e. using fingertips), push it in and use a screwdriver behind the cord to pop it out similar to how he does it at 2:50 in the video, you can put the tip of the screwdriver behind the cord metal piece and pull the screwdriver handle towards you to pop out the connector. I also took a picture of the cord connector with my phone to see what it looks like and where the releasing clip is.
Is it safe to replace the outer glass only or does it damage the screen
We don't support such a solution, so you can do it on your own responsibility
Does the screen have any software or hardware components built in it or it's just a screen?
This is only a screen :)
2017 BMW x3 idrive screen is black. Doesn’t turn on at all. Tried to reset it with the volume button and battery disconnect. Will this fix that or could be another issue?
Hey! Hard to tell because we don't know the origin of the screen. Have you tried resetting it already?
@@bimmer-tech what is the reset process on this year? 2017 BMX x3
i have 2010 E84 x1 i upgraded screen from 6.5" to 8.8" the screen double images so i read i need to change 2 coes .
3000 HMI * DISPLAY_SIZE_RESOLUTION = 8.8_1280x480 and
3001 EXBOX * DISPLAY_VARIANTE = breites_display
however on bimmercode i cannot see 3000HMI to alter the resolution so im not stuck what can i do and why cant i see the option ?
we know nothing about bimmercode methods! We think the best method would be to contact our sales team: info@bimmer-tech.net
If my current screen is like this one, an 8.8" screen already, and it is sun damaged, if I replace it with a second hand identical screen, will it require coding? or any extra process to make it work?
It's fine without coding :)
I'm in Mexico, I have a BMW 120i 2017, is the screen upgradable?
We cannot tell by the model itself, so please check it with your VIN on our website :)
Using his instructions, I replace my screen today in 15 minutes
Great to hear that!
Hi I have 2015 F20 NBT idrive needs to repalce the screen. Should I recode to match to my current car? The other screen is an identical screen second hand from donor. Thank you
Yes, it does require coding :)
@@bimmer-tech Do you know a shop to do it in Sydney Australia ? Or I can do my self with bimmertech help? Thank you
www.bimmer-tech.net/page-installers - here you can find our installer in Sydney, but we don't guarantee him doing it, because the screen replacement is not from our shop :)
My screen has a very short harness. Hope you can recommend a solution
Thank you
Hey! You mean you present screen or the one you'd like to install?
Do you sell Just a "empty shell" for a 10,25" display? Just the plastik.
Sadly not.
@@bimmer-tech sad but thankyou
Any installer in Sydney, Australia?
Yep, here it is: www.carplaysolutions.com.au
Cheers!
Any installer in Calgary, Alberta
Yep, here you go:
www.euroworks.ca
Cheers!
Mine is saying no signal
Have you ordered it from us?
Did u ever find out the problem? Mine is saying no signal too