I like the wavey scratch lines,but get one that has the wider flat wires 1/8 inch wide. This will make a bigger gap for the double coat scratch to grab on to....😊 Make sure that proper bonding between the two coats is optimized. PS, I like the electric float machine 👍 Good job! I am plasterer 1963😊
Nice work. This is the silicone render stuff right? Lots of places round the they use metal guides at intervals, so section by section, to guide and level off. Would that be better for beginners? What's the round power tool? Many thanks.
What mix do you use ,what sand to cement ratio,and any think else you put in , would like to know as am going to give it a go on my back wall am just a DIY have a go see how it goes guy 😂
finish top coat before scratch coat set is something i never really do unless it’s going to be on a farm or something but maybe it worked for you looks good
I originally started watching plastering videos about 18mnths ago, after I moved into my (old) new home and NEEDED to learn. I soon realized that it's something that should be left to the experts and only attempted small and/or outdoor areas myself. I'm glad to report that it turned out great and that I am completely hooked. Now I jump at any chance to practice! Your vids are amazing and your talent is beyond that. A true Master of your Craft! Thank you so much for sharing your knowledge! BTW How long have you been at it?
Ha what Great story! Well done my friend - is lovely to hear that it’s helped you. And congratulations on your results…fair play. I’ve been Plastering for roughly 14 years by the way 👍
Lovely job, nothing worse than seeing newly rendered walls that are a pile of pooh due to imposters that have never read a book or taken a word of advice or training from anyone. Top job.
That's a better finish than my builder gave me on my internal walls!
Thats a damn bummer. I feel bad for ya if thats true.
I'm with ya. The plasterers who did my walls DEFINITELY didn't use a screed, just trowels and it shows.
This guy is doing it correctly. 👍👏
Should of used a condom
Good work ain't cheap, cheap work ain't good...did you guys go cheap or got scammed?
@MrJuanDiego121 they'll say scammed, but guaranteed they went cheap.
Brilliant mix. Top class mortar. Look at the juice with the sponge.. lovely job 👍
Cheers mate.
Well done! Absolutely stunning! This is a perfect example of true pride in your work!
Somebody's got good taste in walls and music❤
Thank you for sharing your skills
Awesome work
Nice work
Nice technique
37 yrs doing.thid.. Nice to see someone else with the skill
Fantastic work my friend
Patience is a virtue.. I love clean work even if it takes longer, as long as the numbers make sense
Like sweet butter on only the finest bread. Lovely jubbly 👏🏻
excellent finish well done sir
I like the wavey scratch lines,but get one that has the wider flat wires 1/8 inch wide. This will make a bigger gap for the double coat scratch to grab on to....😊
Make sure that proper bonding between the two coats is optimized.
PS, I like the electric float machine 👍
Good job!
I am plasterer 1963😊
This is like building the most perfect sand castle wall! Lol love it
I like my hands to be like yours, high quality rendering 😮😮😮
Thats a belter render job mate...delicious !
Excellent work 👍
Good skills demonstrated
Nice
Great job nice finish
Thank you!!
Great bit of rendering 👏
Beautiful work keeps up the good reputation always
Good technique
What Refina sponge float is that? Do you just wash it out in a bucket?
Great looking wall
Heck of a wheel, I remember when we did that with just a cedar shingle. Awesome
Cheers pal!!
Brilliant that 👍🏼 what ratio do you do your mixes? How long after your scratch coat do you apply 2nd coat?
Hard work.
Beautiful.
Can't over estimate the importance of the final step to get that finish.
It’s too perfect that it makes everything else seem bad🥹😂
Love the music!!!!
Amazing 💯👏👏👏
Perfect love Ur videos
And you got loads of trowels I see
Thank you pal!
Thank you thanks that good Idea work
Do you use the same sponge float at the end as you would for finish. Or do you use the fine sponge float
Georgeous
Just got a question what big float you had?
good 👍
Beautiful job!!!
Thank you
Nice work. This is the silicone render stuff right? Lots of places round the they use metal guides at intervals, so section by section, to guide and level off. Would that be better for beginners? What's the round power tool? Many thanks.
This is just sand cement pal. That’s a good way to do it but I’ve always just rendered free hand…and it’s a Refina Powerfloat 👍
What mix do you use ,what sand to cement ratio,and any think else you put in , would like to know as am going to give it a go on my back wall am just a DIY have a go see how it goes guy 😂
@@davidwarren9932 see his other videos pet, he teaches it all in detail
Grande profissionalismo....👀👀👀👌🏾👍🏿🕶
Nice mud work
nice work 👍
Solid job nice one 👍
Thank you!!
It's nothing solid about this wall he should have nailed chicken fence to the wall it's like pouring concrete without rebar
Lovely job!
Wow! 😮
finish top coat before scratch coat set is something i never really do unless it’s going to be on a farm or something but maybe it worked for you looks good
How long before the cracks appear
Good very good
Muy bien trabajo, calidad 👌 super bien. Respeto por ti.
sangat profesional dari segi alat maupun cara kerja sangat ahli
Lovely tidy work 👏
How do you work out the amount of sand and cement needed per square meter??
Luv the floating machine.
Me too! I want one lol
Brilliant work
Thank you!
Excelente trabajo felicidades 👏👍
Is the scratch-coat necessary when going over masonry?
beautiful job
Thank you!
Turned out great!
Cheers mate
Great work..l love it
👍fabulous !
❤ weis mantap Abg ku
Love your videos mate. They've helped me alot recently. Thank you.
Is that just a buffing wheel that you're using??
Раствор отличный👍
странно, что не заветривается
Beautiful 🤩
Beautiful work my man! Whats the name on all the tools and machines you are using?
Doing this calms me down after a crazy night shift at home 😂
Nice job.
Un mastrone🤙
Is this the rco product you're using
i need to work on my skill :( this look amazing !
Kereen
What is the name of the tool to make these wavy lines?
A Scarifier I think.
HOLY SHIT ON A ALTER 🔥🔥🔥
What material mix you use?Normal cement?
Nice 👏👏👏
👍👍👍
I originally started watching plastering videos about 18mnths ago, after I moved into my (old) new home and NEEDED to learn. I soon realized that it's something that should be left to the experts and only attempted small and/or outdoor areas myself. I'm glad to report that it turned out great and that I am completely hooked. Now I jump at any chance to practice! Your vids are amazing and your talent is beyond that. A true Master of your Craft! Thank you so much for sharing your knowledge! BTW How long have you been at it?
Ha what Great story! Well done my friend - is lovely to hear that it’s helped you. And congratulations on your results…fair play.
I’ve been Plastering for roughly 14 years by the way 👍
Mmd no
Ufufufufjfkfkfkfkfłfkkflflfkfkkfkfkfkfkrkrkrkrkkrkdkrkrlrkrkrkkrkrkrkrkrk
You can't pick the art up over night pal. Takes years and dedication.
@@skindawg3615 That's kinda what I was saying, buddy.
No q no saben trabajar los gabachos
Love that machine!
How good does that look. Awesome job
What kind of mortar that he used
Un trabajo limpio,mi respecto 👍
Where found this mechin
You should skudcoat walls with sbr bond before scratch definitely power wash first if walls are standing few years
Can you please tell me the brand name of the wheel machine ? Where can you buy it at ?
Can you tell me where I can buy that tool
nice job
IS cement ?
Nice work
Thank you! Cheers!
Buen trabajo amigo
What is the name of tha machine dose finish?
Lovely job, nothing worse than seeing newly rendered walls that are a pile of pooh due to imposters that have never read a book or taken a word of advice or training from anyone. Top job.
Como é o nome de material que você arranha a parede?
How much is that?
good job! looks awesome!
Great work !
Bel lavoro 👍
Does the first coat need to be dry ?
No
nice!! what are those pipes use for?
What's the mix for the base and the top coats?
Very nice
How to you get this color at the end ?
I iike the music ,,,,,,