Beginners Guide To Rendering…Every STAGE Revealed | MIXING/ APPLICATION/ PERFECT FINISH
ฝัง
- เผยแพร่เมื่อ 25 ก.พ. 2022
- In today's video, I'm going to show you the full process on how to render a wall with sand cement...from start to finish! This is a massive tutorial where we cover a variety of subjects! There is a lot to cover but there's no reason a DIY enthusiast can't try and succeed in rendering their own walls.
Just make sure you copy the steps I outline in this tutorial. I'll show you how to render exterior walls with topics covering:
- How to apply your 1st coat of render (and scratch it)
- The mix you need for success (sand cement render and a magic ingredient that makes a HELL of a difference)
- The secret to getting extra strength in your render
- How to attach corner beads using masonry pins
- The 1st thing you need to do before you even start rendering
- The Right way to float a wall so it's DEAD FLAT
- The best way to get a flat, smooth, finish wall using a sponge
This I the biggest TH-cam tutorial we've created on TH-cam so buckle up and get computable. I think you'll love it. For more rendering videos, check out the link below:
-----
How To Plaster A Brick Wall - • Beginners Guide To Pla...
How To Render A Wall (VIDEO 1) - • How To Render A Wall (...
Tips For Finishing Render (Float & Sponge) - • How To Finish Render |...
-----
If you liked this tutorial, please like and subscribe to our channel. We'd also love to hear from you so feel free to leave your comments below this video! For more information you can also visit our website at:
-----
plasteringforbeginners.co.uk
-----
Thanks for watching!
I'll see you on the next one
Blaine
Plastering For Beginners - แนวปฏิบัติและการใช้ชีวิต
![ความรักไม่ได้น่ากลัวขนาดนั้น (TRUST ME) - LYKN [ OFFICIAL MV ]](http://i.ytimg.com/vi/9np-lAtCRpQ/mqdefault.jpg)
I've been a spread for 17 years and still love watching your content, great advice everytime, I applaud anyone who shares their time and patience to help others who want to learn our trade 👌🏼
Well said mate 👍🇬🇧
I'm a self taught plasterer and renderer .been in the building trade for years and this guy is a breath of fresh air
Cheers pal!! I really appreciate that mate - thank you for watching. All the best my friend 👍
This is so good. You are a great teacher, film maker and craftsman. Just brilliant. An eye for detail and no rushing the stages. Probably the best instruction video I've seen. Also makes me want to get out and start the job. Thank you so much. Inspirational!
Got a small outside front of house wall to render, and this has given me the confidence to get up Screwfix, buy a paddle and mix first coat, wet,scratch, second coat, then sponge it all off....sit back then realise, I've made an absolute mess of it...and get a pro in.
No seriously, great guide, let's give it a go.
Great content mate,I've been a plasterer 25 years now but still love watching how others work.👍🏻👍🏻
Thank you for watching pal!! That means a lot coming from a man with you’re experience...cheers my friend 👍
I'm not even a plasterer but u explain everything step by step, complete and clear, making it look so easy. sometimes make me change my job and become a plaster 😂. Good on u mate and thanks for the videos and tips 👍🙏👏
Straight to the point, minimal verbal full of information, techniques and tips and no annoying music. Very well done.
Many thanks.
One of the best plastering & rendering content creators on TH-cam👍 great video as always keep it up 👊🏼
Thank you mate! I really appreciate that 👍👍
I'm a brickie learning rendering and skimming. What I say to labourers is to stretch the water when mixing. If the sand is sopping then no water needs adding just plasticiser until it dries up when cement is added then add water only if it turns and no moisture is getting through the mix. I love watching your video, I've learnt loads mate keep up the good work.
Great video again Blaine. Not rendered since i trained in plastering 18years ago, but looking to do few jobs soon, great tips and explanations as I find with all your videos.
Always nice to watch videos of plastering/rendering. Different viewpoint to doing jobs yourself.
Another great vid!! I’m just starting out on my plastering and revering journey and your vids give me knowledge and encouragement that I can do it. Keep them coming please your helping us little guys succeed 👍🏻
That’s great to hear mate...thank you for watching! I really appreciate it my friend. All the best pal 👍
Superb tutorial mate. Thanks for your advice.
Great tutorial and great workmanship.
Awesome Tutorial. Thanks.
You’ve given me the Confidence to have a go at this on my Garden project. Nice One 👍🏻
Fantastic tutorial dude🙌
Great content and a big thank you. Just tried my first attempt a rendering, ever, today and very happy with the results.
Very helpful, love the details. Thank you!
You have no idea how much this helped me, answered every question I had 👍🏻
Glad it’s helped my friend! Thank you for watching
Excellent teacher.
Absolutely wonderfully explained.
South Africa..
Yet again, a great video!!!
Great lesson, from a top teacher. Thank you!
Great, comprehensive, 'step-by-step' instructional video, thank you for taking the time and effort to do this and upload - definitely appreciated. Keep going with your awesome channel - and sometimes a 'thankless job', too!👍
Great job by the way, love watching your videos, your a master at it, hard to find people that are passionate about there job.
Thank you!!
Your the best I've seen for explaining everything
Another top video mate 👍🏻 best plastering/rendering channel on here by far!
Thank you so much my friend! All the best ✌️
@@PlasteringForBeginners and to you too buddy ✌🏻
Thank you for sharing your skills. Very helpful. 🙏
Nice one brother, id say the best vid on the subject so thanks for your time, I managed to milk the price of rendering to my bricklaying sotyhis made me money, thank you very much as the end product is banging...
Many tanks for your videos, I’ve had to repair some shoddy work in aus and your videos have helped me immensely. Glad you like the OX tools. 🇦🇺
Another brilliant video bud 💪🏻💪🏻💪🏻💪🏻
Thanks pal! Hope you’re well my friend 👍👍
Your explaination of when the right time to start floating is was great thanks. 👍 I'm excited and nervous to have a go at all this.
Thanks very informative and helpful 👍
Great tutorial. Thanks!
Excellent Plasterer, and I have worked with quite a few over the years .
Absolute quality tradesman.
Really helpful, thanks x
Great video, thanks!
Another great video. I was just going to comment of damping down but you have just covered that. It looks a bit chilly there and I am a bit too old for site work these days but you young bucks can power through a bit of cool and breeze. Keep up the good work. Anyone following this will learn a lot.
Thank you mate - it was a bit chilly but nothing my Northern blood couldn’t deal with ha! All the best and thanks for watching
Excellent , love all your videos
Thanks mate! I really appreciate that 👍
Excellent !
Your a hero mate. Thank you!
I’m a plasterer (30 years) great tutorial pal, nice to see an actual fellow tradesman and not one of the usual fly by nights on here.
Love this channel thanks dude top man
Many thanks for the really excellent Video
Nice job and very good video. Very well explained. I've been doing it for 56 years. I've been doing scratch coat last few days, I always had lads labouring for me but now I am pebbling an extension on my own place and I've got no labourer...its knackering me! Keep up the good work
Respect mate!! It’s bloody tough bumping it on your own. I’m used to it now but I sometimes wished someone would help ha! Thanks for watching...all the best my friend
That's hard work to do on Ur own mate it's hardest trade of them all
Amazing 😍
Excelente trabajo 👏 👍 💪 👌🏻
Thank you 😊
I'm in the US I'm a mason here been doing it for 30 plus years now I've done quite a bit of stucco also my question is for your scratch coat do you use a Portland base first or is it a Masonry mix??? I totally agree with you about using lime with the top coat it gives it a butter feel and makes it easier to apply. You are a very good teacher and it's easy to follow your videos I'm impressed with your talent I'm looking forward to seeing your next video
Great video!👍🏻
Class!
Great video, will be rendering
a block greenhouse soon and this has given me a lot of
confidence,wish U Tube had
been around 40 years ago God knows what I would
be doing now, Cheers all the best for your future career.
Haha cheers pal and good luck 🍀
Brilliant video wish I had seen this year's ago thanks for the help
I love your scratch coat. It’s beautiful.
Really helpful, thank you :)
That is a good demonstration, new to this technique, we do it differently here same principles but the techniques and procedures are different.
Thank you mate
Thanks for watching and I hope it’s helped pal 👍
Great tutorial. Cheers 😎👍
Cheers matey!
Watching from Ireland 🇮🇪 top content 👌 best wishes
Great videos. I'm rendering with sand and cement for the first time soon. It's a long wavy wall that I built. I plan to split the render top and bottom with a textured tile between stop beads. Any suggestions for sponging/finishing?
Great video, really helped me out especially with the mix
Great stuff pal
Great insight to a project i might have a go at. Cheers for the great vid
Thanks for watching 👍
Great advise, thanks.
You are so good bro.
Very very very helpful
God bless you
Hi it's the first time I was watching your great work n advice has you go along. I really enjoyed it. Keep it going. After that so I can put Plaster Primer and then Dulux Paint.
Savvy from South Africa God Bless
Top job fella 👌
Thanks mate!!
Keep up the good work pal 👍 pretty much how I do it. Got a lovely 100sm to do next week ☺️
Absolutely love the videos. You've inspired us to try some DIY rendering next week and we've ordered some plastering sand and cement to start us off. We are going to follow your mix 4:1 for the scratch. The problem I'm having is working out how much sand and cement we'll need for 60sqm. We are rendering a new outbuilding made from high density 7n block. Any advise much appreciated. Thanks again for all the great content
You finished yet??
From A to Z in less then 40 min. Great work. Thanks once again. ps i could not find a hawk in Croatia so I have to make it my self. It has some advantages to work with.
Top Work
Great video and explanation thanks for sharing. Could you tell me if I could use Sikabond SBR+ instead of the Integral waterproofer ? Cheers
Master of your craft Sir
Thank you!!
Thanks you my friend 👍
Brilliant video wish
Thanks for vids, I am planning on rendering brickwork on my house. Grout lines are at least 10mm deep. Do I try to fill these with my scratch coat? Also where did you get your skimmer from, I can only find 1200mm online. Thanks mate,
Blaine Another Top Video 👏
Thank you mate! I really appreciate that 👍
Learning a lot here thanks
Thanks for watching! Hope it’s helping 👍
Hi I've been watching your videos for years. You make it look so easy! You made me want get into plastering / rendering, im currently rendering flower beds around my garden but ive got moisture getting into the render eg. Joints and rising damp Is there a product i can us before painting??
Thank you
Love the vidoe. How would you go about plastering an external block wall that has been painted a few times over the years with masonry paint?
I've just watched this video and it's answered most if not all my questions 🙃
Great to hear!! Thank you for watching mate 👍
@@PlasteringForBeginners no problem, I've watched many of your video's.. I'm a chippy but have a go at anything.. it was a scratch coat and pebble dash job, my god did I struggle at times to get the consistency just right so I could apply the shingle, it was my 1st go ever and 2nd time I have ever rendered anything.. I did a mtr square at a time and certain areas would dry out and not let the shingle adhere whilst others we're to wet still despite using a waterproofer in the scratch and SBR in both coats.. my mix was 5:1:1 sand, cement & lime.. I couldn't even get on with the Derby to flatten off so I did it all freehand. Looks alright but blimin hard going 👍
It's a good look good job
Blinding vid bruv very informative and of course really nice work.
Now me not being a plasterer I once a long time ago tried rendering a four foot high garden wall.
It was about as long as the wall in your vid.
Now I used Sharp sand four to one mix and it took me forever to get it on the wall it was heavy to work with and it was forever falling off. I know now that I tried doing it all in one coat😫
Anyway at the time I was told it was because I didn’t seal the wall first with PVA.
This I now know didn’t matter because the I applied it all wrong.
Needless to say we got a plasterer in to sort it.
Anyway I’d like to know from you if you ever use PVA to seal the block walls first? As in this vid you seemed to just apply the scratch coat straight on.
Thanks again for a great vid.
Top video mate, thank you. I’m in the middle of building a small garden room and will eventually be rendering it. I’d love to have a rough idea how much sand/cement to order. It’ll be roughly 3 metres long on each of the 4 sides and 2.25 metres high
You do it so easy
Hi mate love your videos, in your opinion what is better sand and cement flat render or silicone rend for a house ?
Cracking content matey, spot on. I have been plastering a while but have never done large amounts of rendering. Only small garden walls etc. I have a dilemma though. What happens when you are rendering up to a neighboring wall. Do I just stop bead vertically down the wall to split my side from the guys next door. I have to get my old render off the wall too which is a pain but has to be done as it is ancient. Have to be careful though as would not want to upset the guys wall next door if at all possible. Any advice would be tremendous matey.
Hi is good I liked watch your work is very good
Awesome videos, near perfection... I have 1 question though. Are you using plastic cement or regular portland cement?
Great videos, It will be interesting to see rendering over peddledash wall
Thanks mate. This video I’ve made should help you 👍
How To Render Walls: The Full Guide (Applying Beads & Render/ Preparation/ Floating & Sponging)
th-cam.com/video/qQSrJrn-h-Y/w-d-xo.html
Absolute beginner here. Obviously it takes patience, skill, experience, and muscle. You make using the trowel look easy, for sure it takes years of practice. Wish me luck! Ill have to send you pictures of the progress on my projects.
Hi blaine,
As always a brilliant video put together really well.
Can i just ask, what size corner/stop beads do you use here. Baring in mind the flexi separating bead is 10mm.
If you had a 20mm corner bead could you not use the separating bead or would you just plum it in.
Thanks Blaine, your videos have made me in the plastering game.
Just finished rendering a garden wall after watching this, thanks for the tipa. If you use lime in the top coat can you paint it with exterior masonry paint?
Lovely work buddy. Any tips on rendering over external thermalite blocks?
Thanks mate. This video should help mate:
Wall Of DOOM!!! & My Secret Weapon When RENDERING!!
th-cam.com/video/c9D2zy31Cq0/w-d-xo.html
A big fat Thank you from the Pacific Island of Nauru👌
Weightlifting wrist wraps while rendering 👀 what a great idea, wish I'd have thought of that 👌👏
Haha that’s the one!!
For scratching I do up and down too after the across. You can really dose it with the hose and it throws off the water it dosnt need
best tutorial on youtube, this level of tuition is why i pay for youtube premium
Thank you mate!
Are you familiar with Custom Float? sold in the US mostly for tile applications, but the mixture is 5 to 1 to .5(sand to cement to lime). I'm going over some rugged interior brick. Do you think it would work for my main coat?
Blaine another top vid thank you, I notice the angle of your straight edge is about 90 degrees, is this better than 30 as it looks mint the angle you are using? TIA
Very good detail. I have a fine rendered wall leading down my driveway. There is a horizontal 5mm wide crack in the wall. I am keen to do the repair. I would appreciate if your could provide your comments on the following:
1. Do I need to do a scratch coat. Or can I simply fill in the crack with say cornice cement. Prime it with an undercoat and then put a fine render over it.
2. Alternatively fill the gap with your scratch coat mix and then apply the fine render
Great video pal helped me alot cause I'm just a daft stonemason 😜
Thank you.
👍👍
Great vid pal. Do you use 2 lots of waterproofer in scratch and 1 in top coat. And do you just use that type of waterproofer in all your sand and cent. I have been using Feb
This video should help with mixes mate. I explain everything including additives. Hope it helps my friend:
Best Mix For Render…FULL GUIDE | Get The PERFECT Mix For Rendering
th-cam.com/video/RRjKdcSmrEo/w-d-xo.html