How to Replace Rear Shocks Buick Regal

แชร์
ฝัง
  • เผยแพร่เมื่อ 30 ต.ค. 2024
  • *Check out the tools we used below. If the video was helpful, please give it a "thumbs up" and consider subscribing to the channel.*
    This video goes over how to replace rear shocks on a 2011 Buick Regal with a 2.4 motor. This should be the same process for any 2011-2017 Buick Regal. Depending on your driving conditions and habits, rear shocks wear out every 50-100 thousand miles. If you drive frequently on rough roads, dirt roads or have an aggressive style of driving, they tend to wear out quicker. Shocks and struts help stabilize your vehicle’s movements, enhancing control when you turn, brake, accelerate or encounter uneven road surfaces. Today’s vehicles use shocks, struts or a combination of the two. Shock absorbers are usually the first to go. When this happens, the ride quality becomes "bouncy" or loose and the vehicle's ability to properly perform when cornering diminishes. Shocks are made to stabilize the vehicle and keep the tires in contact with the pavement. Shocks or Struts should always be replaced in pairs, or better yet if you have the money, replace all four, making your vehicle corner and brake like when it was brand new. Signs of worn shocks would be uneven tire wear, rocking, rattling, leaking oil, the vehicle feeling unstable or vague when cornering and in extreme cases, actual bouncing of the vehicle as it travels down the road.
    Tools needed :
    Jack and Jackstands -- -- amzn.to/3rF8elP
    Vise Grips -- -- amzn.to/2ZR09yH
    Screw Driver -- -- amzn.to/3Dr8OWm
    Hammer -- -- amzn.to/3rz1hmf
    Air Impact Gun -- -- amzn.to/3GaS3k3
    Socket Set -- -- amzn.to/31tLJVC
    Hand Cleaner -- -- amzn.to/3onZyOI
    Rubber Gloves -- -- amzn.to/3GgJKmX
    Shop Towels -- -- amzn.to/31qZJzY
    Parts:
    Rear Shocks -- -- amzn.to/3dguBFA
    These are the tools we used or something that was similar. There are many manufacturers and various prices. It's a good idea to buy the better tool with the best warranty and easiest exchange in case of tool failure.
    Disclaimer:
    The Auto Teacher assumes no liability for property damage or injury that happens as a result of any of the information contained in this video. Any information learned from this video is to be used at your own risk. The Auto Teacher recommends safety first! Protective gloves, safety glasses and jack stands are highly recommended. These tutorials are made strictly to help people with their car projects and are given to provide factual information we’ve learned over the past 40 years working on cars. We do not guarantee any particular result or any particular warranty. Any injury, loss or damage contained by the viewer while attempting to follow the video’s instructions is solely the viewer’s fault and not The Auto Teacher.

ความคิดเห็น • 15

  • @julianswistak
    @julianswistak 3 หลายเดือนก่อน +1

    I followed your video to install a pair of Monroe rear shocks on my Regal. It just hit 140k miles. I also replaced the rear coil insulators and found a rear coil spring that broke off the lower smaller diameter part of the coil. So when doing the shocks take a look at those coil spring insulators- same part# top and bottom. They are just one bolt to remove and you use a floor jack to compress in place to realign for the bolt.
    Thank you for posting your excellent video

    • @TheAutoTeacher
      @TheAutoTeacher  3 หลายเดือนก่อน

      Your welcome, thanks for sharing.

  • @pikehunter23750
    @pikehunter23750 3 ปีที่แล้ว +3

    Perfect! Thank you sir! I have the same make/model/year Regal. The last shocks I had replaced under warranty are already blown and leaking all over. I'm going to have to upgrade to an even better quality of shock and see if that's works.

  • @anthonywilson6740
    @anthonywilson6740 ปีที่แล้ว +1

    Thanks, great video.

  • @jimrodriguez7640
    @jimrodriguez7640 3 ปีที่แล้ว +1

    Great video, thanks!

  • @UncleSkoden701
    @UncleSkoden701 3 ปีที่แล้ว +1

    I have a 2013 that is starting to make a knocking sound. I’m assuming this should take care of it

    • @TheAutoTeacher
      @TheAutoTeacher  3 ปีที่แล้ว

      It could, but it’s tough to say without knowing where the noise is coming from

  • @gregwhite3545
    @gregwhite3545 ปีที่แล้ว +1

    Will this work for a 2012 Verano?

    • @TheAutoTeacher
      @TheAutoTeacher  ปีที่แล้ว

      Should be the same basic principle.

  • @MxHxCxTV
    @MxHxCxTV 3 ปีที่แล้ว +1

    Great video my guy, quick and to the point. Any recommendation for shocks to use, or the specific ones you used in this video?

    • @TheAutoTeacher
      @TheAutoTeacher  3 ปีที่แล้ว +1

      Monroe is great or any quick strut with a 2-3 year warranty

    • @MxHxCxTV
      @MxHxCxTV 3 ปีที่แล้ว +1

      @@TheAutoTeacher Thank you for the reply. I’ll check out Monroe.