Uniformation GK two Best Home Resin Printer Right Now
ฝัง
- เผยแพร่เมื่อ 11 ต.ค. 2023
- I was lucky enough to be sent the Uniformation Gk Two: and i love it!
Here's a Link to find everything you want to know about this machine and where to buy
Uniformation GK two : www.uniformation3d.com/produc...
Get $80 off when you use Code: ground
GK2 on amazon.com：amzn.to/3TIvEoe
$80 discount code：ground3d
Valid 9/26-10/15
⭐️Huge Thank You to My Patrons: / groundeffected
MERCH Now Available! - groundeffected.com
🎨 Supplies: elementgames.co.uk/?d=10734
🖌️ US Amazon LIST:
▪️ Airbrush Iwata Eclipse: amzn.to/3FuG821
▪️ Sunlu standard Resin: amzn.to/3Fns0aV
▪️ The Army Painter Wet Palette: amzn.to/3M6Q45K
▪️ Vallejo White Ink: amzn.to/400s4ae
▪️ Citadel Chaos Black Primer: amzn.to/3tw57zm
▪️ Gold spray paint (similar to Montana Gold): amzn.to/3Fm1rTo
▪️ Bamboo Synthetic Make-Up Brush: amzn.to/45DgK53
▪️ Siraya Tenacious for Strengthening Prints: amzn.to/3M46sUw
▪️ Bostik Blu Tack Mastic Adhesive: amzn.to/3rP1gx3
▪️ Mixed sandpaper: amzn.to/492fon6
🖌️ UK Amazon LIST:
▪️ Airbrush Iwata Eclipse: amzn.to/46AFX1j
▪️ Sunlu standard Resin: amzn.to/48ZDgYv
▪️ The Army Painter Wet Palette: amzn.to/3tFj1zv
▪️ Vallejo White Ink: amzn.to/3Fnu4zH
▪️ Vallejo Blue Violet ''Pinkle'': amzn.to/46VPsY
▪️ Citadel Chaos Black Primer: amzn.to/48ZllkQ
▪️ Montana Gold spray paint Gold Chrome: amzn.to/46T2uWM
▪️ Bamboo Synthetic Make-Up Brush: amzn.to/3FkG7Om
▪️ Siraya Tenacious for Strengthening Prints: amzn.to/491selO
▪️ Bostik Blu Tack Mastic Adhesive: amzn.to/3tFujnj
▪️ Mixed sandpaper: amzn.to/3S5ZaTX
🔔 Find me on SOCIAL:
Instagram - / groundeffected
Facebook - / 548001063221083
TikTok - / groundeffected
Discord - Available through Patreon
Website - groundeffected.com/
📍 Check out ROXY ROSE!
_roxy_rose?utm_...
vm.tiktok.com/ZMLxUenru/
#3dprint #3dprinter #3dprinted #3dprinting #acrylicpainting #paintingspiderman #resinfigures #resinfigurepainting #spidermanps4 #spidermanps5 #3dprinting #3dprinter #painting3dprints #miniaturepainting #howtopaint3dprints #3dprinted
Technical mumbo-jumbo below:
---------------------------------------------------
Related Phrases:
How I painted my 3D print / Spiderman, 3D Print, 3D Printer, 3D Printed, 3D Printing, Acrylic Painting, Painting Spiderman, Resin Figures, Resin Figure Painting, Spider-Man Ps4, Spider-Man Ps5, 3D Printing, 3D Printer, Painting 3D Prints, Miniature Painting, How To Paint 3D Prints, 3D Printed, 3D Printed Miniatures, Mini Painting, Resin 3D Printer, 3D Printed Minis, 3D Print, Paint 3D Print,
Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of watching any of my publications. You acknowledge that you use the information I provide at your own risk. Do your own research.
Amazon: Groundeffected is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn commission fees. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Copyright Notice: This video and my TH-cam channel contain dialogue, music and images that are property of “Groundeffected”. You are allowed to share the video link and channel, and embed this video in your website or others as long as a link back is provided.
© Groundeffected - แนวปฏิบัติและการใช้ชีวิต
![UniFormation GKtwo 3D resin printer [HONEST REVIEW]](http://i.ytimg.com/vi/ie18N4GrMVY/mqdefault.jpg)
![UniFormation GKtwo 3D resin printer [HONEST REVIEW]](/img/tr.png)
I bought this machine a few months ago and it is my first resin printer. Couldn’t be happier with my purchase. Glad to see it getting the recognition it deserves.
Starting pretty much at the top! Not a bad way to go. 👍
What type of resin do you use with this model? On their website and if I order one may as well order resin as well. My first 3D printer 👍
@@ninjapumkinI use UniFormation resin in my GK printers but have also used Sunlu standard as well with excellent results.
The calibration on the gk2 was horrible for me.
@@solarrage11 oh so sorry to hear! If you're in the FB group, we'll be happy to help if you're still having problems.
I did an unboxing video on this printer a little over a year ago. 😁 I've got two Gkone's and two GKtwo's and love them like my children!!! Best printers out there! I've had no problems with anything on the GKtwo and have been printing almost constantly since August 2022.
Thanks for this test !
Been waiting for this video from you for a minute. Just got mine 2 days ago and it is noice. Thanks for the vidja dad.
Looks like some smart design choices that I hope others will adopt soon. The inbuilt heater is a nice touch and I can’t understand why more printers don’t use a latch on the hood. It’s such a desired feature and costs next to nothing. Most of us would gladly pay an extra $10 for a latch versus a cheap hood sitting on some magnets
I went with the anycubic M5s mainly because of the cost and its a 12k printer, also its auto level. Its truely a good machine. With that said, if the GK2 was a better price I would've preferred it over the M5s. Im new to 3d printing and I didnt want to spend alot just to find out its not something I want to do. The GK2 will be the next resin printer I buy. Nice video brother
I concur I have mine now for 4 months and I'm 10 bottles down already .
I love background music
nice review
Man I wish I had waited just a few months cause I have the GKOne and don’t get me wrong I love it but this is huge upgrades!! I want that heater for sure.
Hello I just want to say I loved your video. I thought it was very informative and equally I was impressed by seeing the sorts of things that you were printing on this printer. Could you tell me please, where do you get the superman print from? they look absolutely awesome. Many thanks my friend.
Came here for the review. Stayed here for the 80s music 💪
😂 it’s the good stuff
I've had one for about 5-6 months. I won mine, really like it.
Wow that was lucky!!
Your Dad still saving my ching ching to buy this Green Machina and was curious about the voc being neutralized by that magnetic snap on carbon filter. Does it work as they say and this is in your experience with the use of this resin printer. Btw great information as usual and your channel wouldn't be the same without your special loving words at the end. XD
im thinking of buying a new printer. i bought my saturn 1 wayback and this one should be a nice upgrade... altho i was looking for a bigger printbed... hmm
i was about to buy a saturn 3 or m5s to get into resin printing as a beginner, but now i will get this one instead for sure.
You won’t regret it dude. Honestly in love with mine.
Looks like a really nice printer. Maybe one day we'll get them here, but suspect our market is just to small
Holding thumbs for you.
Looks like a great machine! What is the print height? It looks not as tall as my Saturn. This machine sounds great, I will look into it!
Do you have to vent it or is it good to go just in you office work area?
Flip cover and heater? Sold! The height doesn't bother me much as I don't print really tall pieces. Even the tall pieces I normally orient them diagonally
I wish I had choosen that one over my Saturn 2. Not that the Saturn 2 is a bad machine, but that one is a game changing machine. So many features that make it way better and confortable to use.
Yea the features are what I think should be standard now days anyway. But I’m sure when it’s time to upgrade they’ll have something even better !
I have heard very good things about this machine! I could do with upgrading from my Voxelab 🤣
Looks like a great printer! Is the build volume big enough for the 1:6 and 1:4 statues you work with? I have a Saturn 2 but dont think it's quite up to the task of prints that big (or if it is it will take a week to print in pieces)
Yea dude. I did Superman and rogue both in 1/6th both on that printer and I’m pretty sure it was no more than two plates each and about 2 days printing. This is my prefered size machine for general stuff any bigger means you have to pay more attention because bigger machine also means bigger fails.
I should have waited for this review before buying my first printer
A wonderful 3D printer that I would buy if I hadn't just not long since bought a Saturn 8K.
The one thing that is holding me back with printing is support settings. Auto support in Lychee is a pain and almost useless. (Way too dense and the supports seem to leave huge dents in my print)
Any advice on that would be very welcome! Thanks!
- Alan
I use Chitubox. I use medium density on auto supports and have had great success with it. Try it out
Great video, but you didn't level the GKTwo as stated per their manual, maybe that's the reason why you thought it came unlevelled ;)
In jou thumbnail lyk jy amper soos Jack Parow 😆 Nice video!
Ek is kooler dan hom hahaha just need a longer brim on my hat!!
looks nice. odd fdm style leveling. How is this an improvement?
It’s not fdm my dude. And I think it could do with some work but the concept is really clever and makes sure each corner is able to be adjusted individually
Is it dependable long term? Doesn't look like the best reviews on Amazon
Hiya My Dad, or your Dad. Somebody's Dad...🤔🤣 anyway I've been looking at larger resin 3d printers and was wondering what would be your recommendation?
any recomendation on the software. I just got one however the software is not really user friendly
Use lychee slicer
Cashed in my Hilton points, used your code and the Amazon built in 5% discount. Paid $11.08USD. 💪💪💪
Nice price on Amazon US but Amazon Australia has it listed for about $7.5k so it may remain on my wish list.
maybe u can check it by our official links, and here big discount recently.
Since we've learned that a 4k will do us miniature wargamers good enough, i think its coming down to 2 important factors (moving forward): Price and impact to environment. The lower the price, and the better it does at being non-hazardous, the better.
Btw guys they're comming out with a 12k version here in 3 days theyre gonna reveal it!
They did mention this to me but I’d already recorded the video. I can only imagine it’s gonna be awesome too!
Its upgrade kit to this model, not a whole new printer.
Heater feature - does this mean I could use this printer in an unheated environment (garage / loft]?
Yes. I am using it In The back of my shop and there is basically no insulation at all. My other printers would 100% fail in these conditions. And it’s cheaper than heating the whole room in electricity ⚡️
@@Groundeffected thanks for the quick reply - what's the low temp of your shop?
@@jeffholt9437 I can check but in the back it gets down to whatever it is outside as I have a gap the size of a hand under my door. We have a curtain and another sliding door just to try insulate then back room from the front it’s really bad 😂
Grand merci à toi pour tes vidéo. Pourrait tu faire un sous titrage en français pour que je comprenne tout. Merci par avance et encore ce que tu fais est génial.
Hey dude. Best I can do is what TH-cam offers. If I want to add extra subtitles I have to pay for an extra service and I can’t afford this. I don’t have scripts either so I can’t even use free options
tu peux activer les sous-titres et dans l'onglet des paramètres (roue crantée) les traduire automatiquement en français, c'est largement compréhensible
Vat temperature control should be a must for other makers… It’s a little bit expensive though, almost 900€😢
It's on sale for $764 on Amazon right now
I'd love to share ity with my grand, but the sign over there saying no balls games was a show stopper for her, anyway I share with other :p
Hahaha
I clicked the link. Wow. $850 . Is this better than an entry level printer?
It depends what you’re looking at but yea I’d say it’s a step above entry level. Esp with a built in heater that cuts out a lot of issues that you may have from the environment alone. Only thing you have to do is get the exposure right.
And…Duh… good video like always 😂 keep up the good work
Nice, how's customer service? 😁
From what I gather, all of these companies are in China and you can pretty much expect spotty support. But I will say that other than during Chinese New Year when you can’t reach anybody, I’ve had a good experience with Elegoo being pretty responsive.
Suprised you don’t call this “juktwo”
I love my GKTwo so much my wife is jealous... I just do not understand her sometimes...
Levelling looks akward and annoying but Everything else looks good
It is weird but you know what it’s really accurate though. You have full control over each corner. And because it’s held with two screws I doubt you’ll be changing it once it is level
I just open video just wacth until 0:02 my openion it is look soooooo expensive whatever i m gonna watch the video
Kinda pricey.
I want to complain about the end of that video……………
so like...was this company a scam their site doesnt even work.
Is my link broken? Because it’s no scam. The only scam is you not being able to get to the website for now! Maybe ad blocker? I dunno but this machine and company is definitely no scam. I wouldn’t mention them in almost every video if it were that’s for sure. Bust machine I own currently.
Not for the price it isn't.
This whole trend of covering up the smell with carbon filters is nonsense.
You need to vent that shit outside.
looks like a great resin printer, well thought out and polished. but at $750, that's to be expected. not really sure what the big deal is here.