Making a new Bucket pin for the excavator
ฝัง
- เผยแพร่เมื่อ 9 ก.ค. 2019
- Due to low quality materials the pin that had came with the thumb I got for the TB035 failed. Forcing me to cut the pin and bucket to remove it. In this vidja we machine the new pin, the next vidja will cover bucket repair and final installation. Thanks for watching!
Just like that, you “pinned” it!!! 👍🇺🇸
D C ha! I’ll do ya one better
JasonWorksAlot 😉😂
D C now THATS service. Rissiaprime up in dis bitch
Nice job comrade Jason.
Michael J Berg thank you sir!
Nice work!
kb7722 thanks!
Nice job there. Looking forward to seeing the rest of the repairs.
Monty Bussard thanks! I’m looking forward to seeing them done. Not doing them though. Hoping to get to the bucket maybe Friday
Worked like a champ. Keep up the great work.
Scott Tyndalls Home Shop TH-cam thanks Scott!
Nice!
ACE thanks!
Nice job comrade 👍
Randall Robison it’s the vodkas. It’s always the vodkas
Man ether that bucket is well used or someone took a 10-pound hammer to it. LOL, You know what you are doing. So good luck!!!
Duke's World welllll used. I pulled small bits of concrete out of the whole machine for months. Pretty sure it was used as a small demo machine. Poor little guy
Wow, great video. I just made a few pins for my F750 dump. What type of steel did you use?
Just subscribed
tomhendricks316 hey thanks Tom, I used 1117 carbon steel I got it from McMaster Carr. So far it’s holding up nicely. If I do it again I’ll probably spring for stainless though. Glad to have you on board sir! Hopefully releasing some more content soon.
Good job. I custom make all my bucket pin’s and hydraulic cylinder rods 👍
trickmytractor it’s better that way. Being able to spec out your own steel. Atleast I think so
You can do some badass work with that lathe Jason nice job buddy
centsless fabrication thanks man. Love that little lathe. It’s an old one, when jet was still made in Taiwan. Want to get a proper mill still. This is really only a glorified drill press.
I would say you were rough on stuff but when a pin does a uee, it's the pins fault. Sorry metal. Pin ought to break instead of bend. Good you got good stuff to go back with. Keep Wifey Happy!
Lewie McNeely I try to be fair on the equipment. Not rough though do my best to maintain well.
@@JasonWorksAlot I know because you're still working instead of on food stamps. You have to be doing something right. BUT sometimes things just have to be maxed out. But when the pins start bending, something is a little haywire. But I still can't ride with you!
Jason, wear safety glasses when using lathe, mill and ESPECIALLLY when using compressed air. Chips can fly a long way very quickly, you only get one pair of good eyes. Better safe than sorry, you are the first person I have seen machining not wearing glasses.
alan farenden I usually wear them, just couldn’t find them until later in the day by then I was done filming. Believe it or not I buy safety glasses (last pair was missing, I’ve since gotten another box) and ear plugs by the case. But thank you for pointing it out to me.
@@JasonWorksAlot Thank you Jason, for taking the time ro reply. Be safe out there. Alan
good timing, I came in to post a video a there you were!
MLH Repairs LLC haha bam! Look at me go! I’ll be sure to check it out soon
When your video finished youtube recommenced a video by TOT. Nice machining 👍
Dall Tex no kidding?! Maybe I’m
Doing Something right!
great lathe working skills
timothy turigliatto thank you comrade!
ug a doug a tightening southmain auto miss mary coined that torque spes. thank you McMaster for the metal
Good video Jason have a good week and stay safe 👍
Greg Cothrum you as well Greg. Thanks!
I see Coochie doesn't like to mow and move at same time lol, nice job on the pin, Abom79 was cringing as you were running the lathe, but hey you got it done that is what matters, great job comrade!
Kirk Overly nope turns out the track drive and auxiliary drive share the same pump. However she’ll swing and mow all day long so it’s kinda like golfing and missing the ball with your club. Just a spinning blade instead of a club and no ball. Yaknow Tomatoes - potatos
Oh he forsure was. I hope to god be never sees it hahahah
Best part was he did facing, turning, chamfering, and parting all with only 2 tools! #MoreWithLess
BurningDinosaurs I’d have done the parting with the same tool too if it wouldn’t have wasted so much material Hahahaha lazy FTW
" No fingers were harmed during the making of this video " Thanks Comrade Jason .
Woofy W. That’s what you think! Oh fingers not feelings. Yeah my fingers are good thanks for asking
Good work bro. Master as ur art. 💪
STINKY 3 SHOES thank you sir😁
Hey!!! You borrowing ToT's magic hammer? Nice! Abom would be proud! Thanks for the video!
BurningDinosaurs no unlike TOT mines all studio editing magic:((( he’s got the real magic.
Woah, you actually do work? I thought you just drove around in fancy trucks hauling fancy cars. ;p
Az wrenchmaster it’s all an act. Video editing is amazing 😎
@@JasonWorksAlot Haha...forgot to say good job on the pin. Pretty good lathe work my friend.
Az wrenchmaster hahah thank you sir
What is happening over there I see second de-railment on Horseshoe Curve in 3 weeks?
barry hansen no idea that’s freight territory. I work passenger rail. Our tolerances are worlds tighter than freights for track dimensions. One would think they’d all be the same because the trains weigh more on freight doesn’t really matter if they’re marching our speeds or not in my opinion.
Oh now we are making pins 🤦🏼♂️😏. I have no idea why you made a new pin when you had two perfectly good pins there 🤣
I just knew you would be popping in to bust Jason's chops ! Lol
Elite Earthworks LLC Gosh dangit woman I know I need to make you a pin you don’t need to remind me every 6 months!🙄😂
Tom Del Casale 🤣
JasonWorksAlot lol sorry I guess I do bug you about that too often 🤷🏼♂️
Elite Earthworks LLC I love the videos
S.O.T (Junior) told me to subscribe
why did you change your set up to hit the chuck? looks like it is correct at 8:30 then at 11:45 you have the tool aiming towards the tail so the carriage hits.
other than that good work.
ROTTK9 not really sure. For whatever reason that wasn’t clear to me at the time but looks like you’re correct. Whoops
Can you dry clothes on your indoor/outdoor custom power cable! Save electricity using the right power cable, no need for a clothes Dryer.😀😀🤑🤑
S.O.T. Metalworks Hahahaha I never thought of that! Maybe I’ll leave it up!
That is... genius!
S.O.T. Metalworks I love the videos
good vidja with a magic trick but may need to work on it so your hole isnt wobled lol
Joe Southern right. No one likes a loose wobbly hole!
Good to see your doing well my friend more vodkas
Larry Ross doing my best to make it look that way haha!:)
Gona have to practice your This old Tony tricks lol
gavin hirt work in progress hahahah. I knew it was hard to do but man was that an understatement
@@JasonWorksAlot that crazy man makes it look easy
You forgot to credit the clothing provided by Loggerwade.com, along with the lathe and everything else in the shop.
Brian Gardiner it’s only a small portion of my contract agreement. Sometimes it’s better to just be seen in it
Hi Jason!!😀😀
Nice job on the pin there buddy!! It should work good!!
Have you considered putting a ratcheting coupler on the brush hog so when you cut the flow to it when you want to move it can slow down by itself?? That way it won't be so hard on the hydraulic system on the little Coochie.
Take care and don't work too hard!!
The big Coochie.
Al Dredske funny you should mention that Al. There’s a crossover valve mounted to it. With lines and all. Just haven’t gotten around to finishing the install. Local hydraulic shop didn’t have all the fittings on hand and my ADD prevented me from going back and getting them at a later date. At this point I think path or least resistance would be the little motor internally bypassing over the pump taking the shock. Could be wrong. Was defiantly wrong once before. 😊
You get a pass mark on the machining not so on the polishing all in nice job will suite the purpose.
barry hansen woo 30% success rate is an improvement in my book! The polishing wasn’t really meant to be polishing more so just experimenting. We all know I’m way too lazy to polish a pin 😉
I like what you do....good voodoo...more vodka good 👨
J. Chris Beck I like what you say! Mmmm vodkas
Shopping Esbay not from your guy Criag? 😮 man oh man!
Mrs. S.O.T. Metalworks this old purchase. Esbay used to be goodshyt until Olga stop order for me
BTW.... I meant to ask you....how does the AC work in your excavator ? Lol... I'm sitting in my Kubota KX161-3 freezing my butt off with the AC on low !!!!!
Tom Del Casale works great! The recirculating function is currently inoperative though.
You mean the school bus fan !!! Lol
coulda done without the footage of you polishing your shaft. I'm at work for goodness sake!
Hahaha that's funny
BurningDinosaurs you liked it and you know it. Besides I had to watch you fondle your greasy ball remember...
@@JasonWorksAlot Didn't say I didn't like it, just that it was borderline NSFW. And, that wasn't my hand FYI ;)
BurningDinosaurs hahaha are we crossing into AvE territory now?! Asking for a friend.
@@JasonWorksAlot Tell your friend we've been in AvE territory for a long time already!
You should use a crush nut for the bolt so you don't have to worry about it loosening up
centsless fabrication good call. I’ve got nylocs I like the crushed better though. Thanks!
U need Tito's
KEN ARRIGO you’re damn right sir
@@JasonWorksAlot noise here komaraden
Not bad, but why did you have feminine hygiene products sticking out of your ears? 😂
Have a good one.
Jerry Stott what I do in my spare time is none of.... oh the ear buds? Heh heh. I want to listen to music while I work without copyright strikes 😁
@@JasonWorksAlot 😂😂
Nice work!
JK Hammill hey thanks!