Andrew, my man! You should make a video on tools every man needs. I have truly learned so much from you. I respect your work ethic, attitude, and ability to adapt/adjust in any work situation. Keep on making a difference good sir! It's nice to see an authintically good person passing on knowledge!
Andrew Camarata, if you put a plastic bag over the magnet, it's even better, as you can just invert the bag over the metal filings, that way there is no pain to get the filings off the magnet afterwards... :)
WHHHHHAT!!! A Plastic bag, “just Throw it away”! Shame on you, the Liberal coalition has taken plastic straws, going after water bottles (but not coke), no more bags... You my friend just put another target on practicality.🤣🤪😂
Andrew is very inspiring. Wife and I are now planning on buying a farm and one of the first things I'm going to get is an excavator even know I need a three-point hitch tractor first. lets get to work.
@@Harley04 haha... no not really... I'm a heavy equipment operator and love to fabricate... I love his ingenuity and creativity to get stuff done... One of the real truly smart guys out there...
Have to say, watching you work takes me back 35-40yrs ago when I was your age. Used to do as you do now, build, repair and work hard as hell to get jobs done, as well as make do with what we had. Sadly, can't do it as used to since MVA way back which changed thy life for ever! Keep up the good work and keep making your videos. P.S. Sorry about Levi.
I just bought a Chinese HT10 0.8T (metric) 19xx lbs 12hp diesel excavator brand new. It's slow, weak, noisy, and now I'm waiting for it to break. It was cheaper than the cheapest used excavator on craigslist. I've got 4 hours onto it now and burned 3ish quarts of diesel. Ground speed is max 0.9mph, no rabbit mode. No offset on the boom, so trenching next to walls or fences is fun. I also got an 8" trenching bucket and a 8" auger drill. All for $10500. I have a spare engine in my 61KW diesel generator if Mr Justin Case shows up. I've already started changing the Chinese grease fittings to Zerks. The seller had the factory put on name brand hydraulic hoses (Continental) so they should last at least the year warranty. I already have it rented out for $350 a day with an operator (Me to start with) for a total of 6 days in May so far and I don't even have it at home. It's to small to dig a hole, it's the perfect size to trench in back yard for pool plumbing, drill fence post holes, and to get used to it - I've already made $400 getting a yard leveled, flattened, and moving stumps out of the way. While doing that I had 3 people stop by to get my card for work they want done. At $200 a day, that's paid off in 60 working days -- I should be able to do that within the next 6 to 8 months. Within 2 years, I should have enough money saved up to buy the 3.5 metric ton excavator.
Andrew, you inspire me a lot with your genius repair that you are doing with almost nothing. I'm not watching TV, I'm watching only TH-cam and your video are on top of my favorite. Thanks a lot for sharing your experiences and don't be shy to post more often lol. When I finished watching your new video, I'm waiting for the notification for your next one. Sorry for my English, I'm French guy.
Learned something new.. My dad the engineer who has now passed away would have LOVED that clever adaptation. He was a constant builder, rebuilder.. and loved clever tricks. In all of Andrews vids, this is the gem my dad would give him a bunch of thumbs up for. 👍👍👍👍👍👍👍
Agreed, very impressive and original idea. I will remember that and definitely use that in the near future because I need to install grease fittings where they are needed but not included originally. Thanks and best wishes.
Andrew, my friend, you're THE MAN !! You make things seem so simple !! I was really impressed by you skills with this bucket repair !! Following along, you make it an absolute pleasure to fix ALL things !! Thank you so much for sharing 🙂, it was FUN !!
I love watching you fabricate stuff like this, I watch your video’s multiple times because it’s better than what tv offers today and I hope I grow up someday to be like you!
Never really thought of using the large clamp to hold pressure on the drill and sit back and let the bit do the work. Adding that nugget to my knowledge
Good stuff Andrew! 20 min doesn't quite meet the recommended therapy for sane people who love your channel! Please keep all future vlogs above 60 min. Just saying! Love & Prayers little brother! Also when you put springy stuff in a press! It could spring out!
ANDREW, Having taken "Heavy-Duty Mechanics" at BOISE STATE UNIVERSITY TECH, The Excellent Professors there, Having had 20 to 30 years experience in the Mechanic field, I can suggest a few things for You to consider. #1, shafts that have grease zerks are needed to to ware and tare on the equipment. A slot can work as well as drilled shaft. #2 putting a little grease on the end of the shaft will make the install alot easier. Way to go!!!
Thanks for posting Andrew I love Levi and appreciate you teaching me stuff I have nobody to teach me. Never knew the thumb hinge had a hydraulic piston. I was thinking I hope that installed grease fitting didn't weaken the joint. Anyhow I wish you a blessed day and pet Levi for me and tell him good boy for me.
At sixty, I have learnt more from you than a lot of people I have watch on TH-cam for the last 3years, most people speed their video that it gets hard to learn anything !
Hey Andrew, keep an eye on that pin, hydraulic cylinder rods bend way easyer than excavator pins. And you need to prevent that pin from turning and wearing out the non bushed holes. On my Kobelco I welded my pin pipe thing (made the same as you) to the thumb. Greetings from Germany. Keep‘ em coming!
Another great video Andrew! Thank you so much. Just a small mention regarding the greasing.We are required to wipe every zerk before and after greasing to prevent any grit or dust from being pumped into the bearing that can destroy the bearing. Keep the videos coming.
Andrew, it would be amazing to see what you could produce with a lathe, milling machine and a plasma table. BTW, cant believe you managed to cut through that very thick washer with a hole saw with no centre in the washer, well done you man. Kindest regards. Joe
Nice repair, AC! I just installed a new aftermarket thumb on mine about two weeks ago, and it came with a longer, undrilled pin. I drilled and tapped for a new Zerk fitting in the same spot you did, and haven't had any issues with it getting damaged. It's a very common problem, breaking those factory pins, based on what I've read on the Kubota forums, and videos on YT.
I wouldn't blame Kubota too much. The only way to stress the center of the pin is when the bushings are trashed and the pin is no longer in shear. Still, a good fix and a weak point dealt with.
I never thought I would be completely watching a 20 minute video of a man making pins for a track hoe on a friday night. My only complaint is that it was only 20 minutes long! Thanks for the great videos Andrew, they are a breath of fresh air compared to all the shit that is considered to be entertainment now days! I hope you have a good6 and profitable summer and wish you and Levi the best!
"shit that is considered to be entertainment". Sam you are right. And I think it might just be possible (Hey! It could happen) that Andrew is the reason for a general ratings drop in TV audience figures.
Fantastic, another Andrew video. I have things to do and saw Andrew in my notifications and everythig can wait until I watched the video. Whether it be a ripping up trees, digging a hole, wrenching or repairing video, these come first before anything I do. They make my day. :)
Came home after my sons high school baseball game 10:45pm . Got notification of Andrews new video . Dropped everything I was doing , Watched program perfect Friday night.
Great idea but what I did concerning the washer with hole to big for holesaw was I filled it with weld and ground it smooth so the hole saw had an exact center 👍 Worked great!! Keep up the videos Andrew they are awesome thanks!!
I bet these manufacturers get pissed whenever you fix a problem that their college educated engineers didn't come up with. I have done that many a times on my job and have had my ideas stolen and someone else got credit and a bonus for it. Oh, well. Andrew, you are da man. I'd love to see you and Paul Short put your brains together and make stuff. He even has a plasma table that I've heard you mention numerous times in your videos. You both are the best. He is the "Modfather", but you are right there with him. GOD Bless.
Having worked in a machine shop for 40 years and now retired, I was hoping you would mention for the sake of some viewers that when you were tapping that NPT thread for the grease plug, that because it is a tapered thread you don't run the tap all the way down to bottom out the threads on the tap.
The good thing about this kind of videos is HOW MUCH Kubota lost on parts and HOW MUCH one can save doing a job like that, which in itself, is not that hard to do! Videos like these (from Andrew) teach us new ways of thinking and how to save A LOT OF $$$ !!! I am a DIY myself, but I am learning so many new ways of thinking in here!!! Like the tools used to install a radio in a pickup truck...LOL. I used to have trucks and employees... I got ripped off so many times by companies, mecanics and even employees !!! Now with no more employees (my choice) I try to fix my stuff myself, and with internet , google and channel like Andrew's , I just love fixing stuff like he does!!! And a future project will be to buy a used ...excavator!!! Time will tell. Anyway, till next video, have a good day to all of you
McMaster Carr is a good source for about anything you need. bearings, bushings, belts, shafts, fasteners, fittings, etc. most of the time when we ordered something before 3pm we would get it the next morning on regular freight rates. check out their on line catalog. also, when you are in a pinch, dish washing soap is a good lubricant for drilling and tapping holes.
Used your idea of putting a grease nipple on the bottom bore of the arm on our 323 Bobcat. Built a hydraulic thumb and used this pin pivot location to put the thumb. This required a longer pin to connect the bucket AND the thumb. Bored out the the new thumb pin and guessed just where the centre was to come out of the pin between the bushings. Hard to get it exactly between the bushings. The better idea was yours, to drill right into the center of the bottom arm and thread in a grease zerk. Works great! Thanks!
I wonder if Andrew know about these things called bushings to keep things from being loose and flapping around. I just can't stand joints being too worn and flapping about, fresh bushings and lots of grease is soo nice!
How would bushings work in equipment like these? Bushings are generally made of softer metals as the go between of roller and ball bearings on pulleys, primary drive chains and drive belts. On the equipment shone on this video it clearly shows the pins, under high forceful stress, are bending and breaking where they shouldn’t be. Andrew stated that in his discourse explaining the issue with manufacturer’s OEM parts that they were flawed. Bushings in this equipment would loosen and cause a maintenance headache because of the prevalence of replacement.
My teeth cracked after I welded them on, the only way I could get them to stop was 100% weld around it with Pre and Post heating. Great channel mate. Reckon I have watched all your vids by now :)
I can't even do simple home repairs without doing one of the following: 1. Completely destroying the thing I'm trying to repair 2. Abandoning the repair because I'm stumped 3. Injuring myself.
Im lucky All i have to do is look at a machine and within minutes i can fix it and also modify it so it never breaks again by modifying my washing machines a driers in 12 years thieves have NEVER HAD A FREE WAS OR DRY AGAIN. I SOLVE TRICKY PROBLEMS IN MY DREAMS..WORKS TOO.
For anyone that missed Andrew's live stream, go back and watch it, a lot of good information about his plans. I missed the original but watched it the other night and it was excellent.
Every time I get a TH-cam notification I hope it's yours or only 1 other person. I love your channel, Andrew. I've been an operator for 4 years now also laying pipe. Your videos are my Zen. Cant wait to have my own property and toys like you. Thanks for all the awesome content.
3:30 If the grooves you saw in the pin line up with the gap between the links and the boom then they are supposed to be there. You have no doubt seen ridges or grooves worn in exactly that location on old pins. Pre-cutting that smooth rounded groove prevents the sharp edge of a the boom or link ears from cutting into the pin and forming a stress rise. You can still make a greaseable pin is you cut a shallow helical groove in the center section instead of one all the way around. The groove should be rounded and filed nice and smooth, just like the ones in the intact pin.
As always, I learn from you. Simple tools work for sure. The only thing I can add is that you may want to use a copper based lube like Never-Seeze or Permatex on bolts and pins - especially the ones that you know are going to be coming off occasionally. Trust me, it makes removal a lot easier and is inexpensive. A usual, Levi steals the show!
As winter is passing and the weather has started to clear up, I expect an uptick in andrew videos. When he was like "Relatively cheap tools, $300 stick welder....I was like...datz not cheap to me...but then again if you have equipment like he does then $300 is a drop in the bucket compared to paying for some of those parts or repairs at a shop for sure. Look forward to seeing more as always.
Andrew, I seriously need a link to that two way ratchet with the pry tool on the end at 2:33. Love the videos, man. You work your arse off AND you film everything. You are a machine, and I for one am grateful.
Andrew your becoming the true craftsman, great to see your dad out there working with you Im sure it keeps him feeling young even if its just helping you !!! Andrew do you have any plans for a Patreon page in the near feature extra cash flow couldnt hurt equipment, tools, exc.... food for thought !!!
Hello, Andrew. Only you could say 'give it a few taps' when you mean 'hit it with the sledgehammer'. Cheap tools, angle grinder, drill press (maybe rare). Spring is in full swing here in Dixonville. Sweetie says, "It works good, he's a good operator'. Love to Levi.
I was inspired by Andrews videos so I went out and bought the cheapest welder from harbor freight. I practiced in a t shirt and welding gloves and goggle just like Andrew. An errant piece of slag popped off and burned right through my shirt and embedded itself above my right teet. Guess who has an apron coming in two days from Amazon?
@@AndrewCamarata Man, I ruined my biker jakket zipper welding. Lesson learned. Also, it was very uplifting to see you running that 'TombStone 225. That's really how simple my shop is and its rather reassuring to know that you trust and farm box like the one I got. Cheers dude.
@@AndrewCamarata Yeah. You already know. Priorities......lol. I finally just repaired the holes in my old Karhearts. About 36$ for a new pair but it's a lot less than finding a GF who kan sew. ...... I tend to pikk my battles. ;)
I'd recommend replacing the bushings, the pin probably only broke because both it and bushing are worn out. Its not a fun job but something that should be done.
I think it’s great that a multi billion dollar company pays big money to have this equipment designed and you show up break it or bend it and show them ( I’m sure they watch your channel also) where their flaws are your the best. Thanks for the videos. M
Touch Metrics Actually, Andrew works smart AND HARD. That's why most of us who are here love his channel and videos, besides his persona, charisma and whatever we learn about anything he works on. He's a not a lazy, entitled millennial sob, like most newer generations nowadays. He's high energy, motivated and hard working 👌🏻
@@V0YAG3R i was obviously not attacking his character, it was a complement to his work ethic if anything as ppl who do things smarter have often done them before. As for your judgement of millennials... this generation works more hours to pay off more school debt than any other in history. I think you're getting your judgements from the evening news. They'll turn you against your neighbor.
Fantastic job! I have never seen pins so nice and tight. Not even factory new! You need a lathe to make those pins! Cheep is nice but with all the pins you have a lathe would be very worth while
A great hole saw trick stack those hole saws when you need to enlarge a hole. If you have 3/4" hole and want a 1.5" stack a 3/4 and a 1.5. The 3/4 will guide the 1.5. Sorry if someone else already mentioned this. Great video as always!
Andrew, you never cease to amaze and amuse me. The clamp on the drill was sheer genius whether or not it was your idea. This rivals the chainsaw dash video for sudden wtf rating. Cheers from B.C.
Maybe what they should have had was a spiral groove. Very tricky to machine such a few turns with even a lathe so I think you did the right thing. Just have to keep taking it out and greasing - or carry a few self made spares! Interesting as ever. Cheers. BobUK.
thread of grease nipple is BSP taper thread for piping ! Welder first tool for a good workshop !!! After the angle grinder --- Put wood in the vice does hold round object better --- like the washer ...! Satisfaction when work is done and came out good ! Take care my friend !!!
Andrew, my man! You should make a video on tools every man needs. I have truly learned so much from you. I respect your work ethic, attitude, and ability to adapt/adjust in any work situation. Keep on making a difference good sir! It's nice to see an authintically good person passing on knowledge!
Yes it is but when you pass on knowledge you should know what your talking about!!
I'm more of a woodworker myself , but this gave me a great idea 💡 on video ,thanks man
Andrew Camarata, if you put a plastic bag over the magnet, it's even better, as you can just invert the bag over the metal filings, that way there is no pain to get the filings off the magnet afterwards...
:)
slick
🧐💡👍
Excellent idea...never thought about that but it makes sense...Thanks!!
WHHHHHAT!!! A Plastic bag, “just Throw it away”! Shame on you, the Liberal coalition has taken plastic straws, going after water bottles (but not coke), no more bags... You my friend just put another target on practicality.🤣🤪😂
@@just1nicmechanicalwelding82 The orange doofus potus agrees with you.
Friday night. thank you for uploading videos for those of us with no social life
We have a social life-Andrew!
I'm watching this from the club
Yup just my son and I are home watching Andrew. Thanks Man
Watching Andrew (especially on a friday night) is better than having a social life, no bs drama and it's educational!
196,000 subscriptions, 46,700 views, 439 comments within a few hours of posting, I'd say we're pretty social. LOL
My favorite channel to get a notification about.
Andrew is very inspiring. Wife and I are now planning on buying a farm and one of the first things I'm going to get is an excavator even know I need a three-point hitch tractor first. lets get to work.
Me.too!
Ah, ur so sweet, bet U say that too all the channels
@@Harley04 haha... no not really... I'm a heavy equipment operator and love to fabricate... I love his ingenuity and creativity to get stuff done... One of the real truly smart guys out there...
Parabéns a Adwson câmara BR. Estado pr
This was really satisfying to watch as a fellow fix it guy, awesome seeing broken things come back to life after a little bit of tlc
Have to say, watching you work takes me back 35-40yrs ago when I was your age. Used to do as you do now, build, repair and work hard as hell to get jobs done, as well as make do with what we had. Sadly, can't do it as used to since MVA way back which changed thy life for ever! Keep up the good work and keep making your videos. P.S. Sorry about Levi.
I just bought a Chinese HT10 0.8T (metric) 19xx lbs 12hp diesel excavator brand new. It's slow, weak, noisy, and now I'm waiting for it to break. It was cheaper than the cheapest used excavator on craigslist. I've got 4 hours onto it now and burned 3ish quarts of diesel. Ground speed is max 0.9mph, no rabbit mode. No offset on the boom, so trenching next to walls or fences is fun. I also got an 8" trenching bucket and a 8" auger drill. All for $10500. I have a spare engine in my 61KW diesel generator if Mr Justin Case shows up. I've already started changing the Chinese grease fittings to Zerks. The seller had the factory put on name brand hydraulic hoses (Continental) so they should last at least the year warranty. I already have it rented out for $350 a day with an operator (Me to start with) for a total of 6 days in May so far and I don't even have it at home. It's to small to dig a hole, it's the perfect size to trench in back yard for pool plumbing, drill fence post holes, and to get used to it - I've already made $400 getting a yard leveled, flattened, and moving stumps out of the way. While doing that I had 3 people stop by to get my card for work they want done. At $200 a day, that's paid off in 60 working days -- I should be able to do that within the next 6 to 8 months. Within 2 years, I should have enough money saved up to buy the 3.5 metric ton excavator.
Good luck with it.
Sounds like you’ve got a plan!
Good luck, maybe start a YT Channel!🤠
RL - Buffalo, NY
Andrew, you inspire me a lot with your genius repair that you are doing with almost nothing. I'm not watching TV, I'm watching only TH-cam and your video are on top of my favorite. Thanks a lot for sharing your experiences and don't be shy to post more often lol. When I finished watching your new video, I'm waiting for the notification for your next one. Sorry for my English, I'm French guy.
Great use of a speed clamp when drilling
I was thinking the same thing.
Learned something new.. My dad the engineer who has now passed away would have LOVED that clever adaptation. He was a constant builder, rebuilder.. and loved clever tricks. In all of Andrews vids, this is the gem my dad would give him a bunch of thumbs up for. 👍👍👍👍👍👍👍
Yes the use of that clamp was awesome!
Agreed, very impressive and original idea. I will remember that and definitely use that in the near future because I need to install grease fittings where they are needed but not included originally. Thanks and best wishes.
Pre grease grease gun if it had been battery powered it would have been a family member helping out
Andrew, my friend, you're THE MAN !! You make things seem so simple !! I was really impressed by you skills with this bucket repair !! Following along, you make it an absolute pleasure to fix ALL things !! Thank you so much for sharing 🙂, it was FUN !!
I love watching you fabricate stuff like this, I watch your video’s multiple times because it’s better than what tv offers today and I hope I grow up someday to be like you!
Another great AC repair video, Its always fun watching you do your magic! Levi seemed to give it an A+ rating.
tools + technology + materials + manpower = job well done !!! Always a fun having Andrew Camarata channel !!! Congratulations once again !!!
Never really thought of using the large clamp to hold pressure on the drill and sit back and let the bit do the work. Adding that nugget to my knowledge
Both hilarious and genius!
Great way to both drill off-center and snap a drillbit! I noticed that zirc didn't thread on all the way.
Good stuff Andrew! 20 min doesn't quite meet the recommended therapy for sane people who love your channel! Please keep all future vlogs above 60 min. Just saying! Love & Prayers little brother! Also when you put springy stuff in a press! It could spring out!
ANDREW, Having taken "Heavy-Duty Mechanics" at BOISE STATE UNIVERSITY TECH, The Excellent Professors there, Having had 20 to 30 years experience in the Mechanic field, I can suggest a few things for You to consider. #1, shafts that have grease zerks are needed to to ware and tare on the equipment. A slot can work as well as drilled shaft.
#2 putting a little grease on the end of the shaft will make the install alot easier. Way to go!!!
Thanks for posting Andrew I love Levi and appreciate you teaching me stuff I have nobody to teach me. Never knew the thumb hinge had a hydraulic piston. I was thinking I hope that installed grease fitting didn't weaken the joint. Anyhow I wish you a blessed day and pet Levi for me and tell him good boy for me.
At sixty, I have learnt more from you than a lot of people I have watch on TH-cam for the last 3years, most people speed their video that it gets hard to learn anything !
Coffee and my pal Andy, Saturday morning. Doesn't get any better.
Hey Andrew, keep an eye on that pin, hydraulic cylinder rods bend way easyer than excavator pins. And you need to prevent that pin from turning and wearing out the non bushed holes. On my Kobelco I welded my pin pipe thing (made the same as you) to the thumb. Greetings from Germany. Keep‘ em coming!
And it's fixed!
Woof to Levi.
Thanks.
Another great video Andrew! Thank you so much. Just a small mention regarding the greasing.We are required to wipe every zerk before and after greasing to prevent any grit or dust from being pumped into the bearing that can destroy the bearing. Keep the videos coming.
Andrew, it would be amazing to see what you could produce with a lathe, milling machine and a plasma table. BTW, cant believe you managed to cut through that very thick washer with a hole saw with no centre in the washer, well done you man. Kindest regards. Joe
Joe McIntyre I would like Andrew to purchase a lathe think he would surprise himself with what he could do
@@AdrianHiggins83i think he plans to get one at some point.
Good to see you again Andrew and have a great weekend. Thanks for the Video !
Nice upgrade on the battery powered tools. Great video's bro. Very entertaining.
Nice repair, AC! I just installed a new aftermarket thumb on mine about two weeks ago, and it came with a longer, undrilled pin. I drilled and tapped for a new Zerk fitting in the same spot you did, and haven't had any issues with it getting damaged. It's a very common problem, breaking those factory pins, based on what I've read on the Kubota forums, and videos on YT.
Yeah. That's the way to go when adding thumbs. Next time I add a thumb to something I am going to make it like that Kubota where it shares the pin.
I wouldn't blame Kubota too much. The only way to stress the center of the pin is when the bushings are trashed and the pin is no longer in shear. Still, a good fix and a weak point dealt with.
Very true. He probably would have been better to replace some of the wear components.
Great job!
You can tell how good the repair is by how much the bucket shakes and rattles!!!
That one did not shake and rattle at all
I never thought I would be completely watching a 20 minute video of a man making pins for a track hoe on a friday night. My only complaint is that it was only 20 minutes long! Thanks for the great videos Andrew, they are a breath of fresh air compared to all the shit that is considered to be entertainment now days! I hope you have a good6 and profitable summer and wish you and Levi the best!
"shit that is considered to be entertainment". Sam you are right. And I think it might just be possible (Hey! It could happen) that Andrew is the reason for a general ratings drop in TV audience figures.
Fantastic, another Andrew video. I have things to do and saw Andrew in my notifications and everythig can wait until I watched the video. Whether it be a ripping up trees, digging a hole, wrenching or repairing video, these come first before anything I do. They make my day. :)
Came home after my sons high school baseball game 10:45pm . Got notification of Andrews new video . Dropped everything I was doing , Watched program perfect Friday night.
Great idea but what I did concerning the washer with hole to big for holesaw was I filled it with weld and ground it smooth so the hole saw had an exact center 👍
Worked great!!
Keep up the videos Andrew they are awesome thanks!!
I wish we had more uploads from this channel because this man is amazing
First channel I subscribed to... and still my fave!
Thanks Andrew for showing your clever fixes... and of course thanks for the peek at Levi again.
them bushes in the boom need replacing as they will turn in the boom and wear the boom out quickly,
Love watching Andrews videos, pick up so many tips and tricks, it would be really cool to hang out with him .
Finally got a cordless impact!! You’ll fall in love with it!!
? He's had one for a long time
I bet these manufacturers get pissed whenever you fix a problem that their college educated engineers didn't come up with. I have done that many a times on my job and have had my ideas stolen and someone else got credit and a bonus for it. Oh, well. Andrew, you are da man. I'd love to see you and Paul Short put your brains together and make stuff. He even has a plasma table that I've heard you mention numerous times in your videos. You both are the best. He is the "Modfather", but you are right there with him. GOD Bless.
That's a smart adaption for your drilling. ;-)
You forgot the long clamp. ;-D
Having worked in a machine shop for 40 years and now retired, I was hoping you would mention for the sake of some viewers that when you were tapping that NPT thread for the grease plug, that because it is a tapered thread you don't run the tap all the way down to bottom out the threads on the tap.
Awesome video! Peace and Good Fortune to you and your family.
The good thing about this kind of videos is HOW MUCH Kubota lost on parts and HOW MUCH one can save doing a job like that, which in itself, is not that hard to do! Videos like these (from Andrew) teach us new ways of thinking and how to save A LOT OF $$$ !!! I am a DIY myself, but I am learning so many new ways of thinking in here!!! Like the tools used to install a radio in a pickup truck...LOL. I used to have trucks and employees... I got ripped off so many times by companies, mecanics and even employees !!! Now with no more employees (my choice) I try to fix my stuff myself, and with internet , google and channel like Andrew's , I just love fixing stuff like he does!!! And a future project will be to buy a used ...excavator!!! Time will tell. Anyway, till next video, have a good day to all of you
Not only did you save money, you made the piece so many more times better knowing it was manufactured to "CAMARATA SPECS"
Great video of a great repair, Nice to see you and your dad get it fixed. Levi says "ITS FIXED"!
McMaster Carr is a good source for about anything you need. bearings, bushings, belts, shafts, fasteners, fittings, etc. most of the time when we ordered something before 3pm we would get it the next morning on regular freight rates. check out their on line catalog. also, when you are in a pinch, dish washing soap is a good lubricant for drilling and tapping holes.
Another job done. Fixed better than new. Always like to see your fixes that turn out better than factory. Can't wait to see it on the job.
i didnt know irwin made a handheld drill press. lol good idea
Excellent idea adding the grease fitting to save on an expensive pin. I’m absolutely doing that to my kx91-3.
Love seeing Levi get some ‘screen-time’. Just hope he doesn’t get a big head and go ‘Hollywood’ on us! 😎
Great vid Andrew!
🤜🤛
Used your idea of putting a grease nipple on the bottom bore of the arm on our 323 Bobcat. Built a hydraulic thumb and used this pin pivot location to put the thumb. This required a longer pin to connect the bucket AND the thumb. Bored out the the new thumb pin and guessed just where the centre was to come out of the pin between the bushings. Hard to get it exactly between the bushings. The better idea was yours, to drill right into the center of the bottom arm and thread in a grease zerk. Works great! Thanks!
I wonder if Andrew know about these things called bushings to keep things from being loose and flapping around. I just can't stand joints being too worn and flapping about, fresh bushings and lots of grease is soo nice!
How would bushings work in equipment like these? Bushings are generally made of softer metals as the go between of roller and ball bearings on pulleys, primary drive chains and drive belts. On the equipment shone on this video it clearly shows the pins, under high forceful stress, are bending and breaking where they shouldn’t be. Andrew stated that in his discourse explaining the issue with manufacturer’s OEM parts that they were flawed. Bushings in this equipment would loosen and cause a maintenance headache because of the prevalence of replacement.
@@JD-kg3mx dude must have hit a nerve let's go Brandon!
Clearly using his excavator as a hammer! - lol
My teeth cracked after I welded them on, the only way I could get them to stop was 100% weld around it with Pre and Post heating.
Great channel mate. Reckon I have watched all your vids by now :)
I can't even do simple home repairs without doing one of the following:
1. Completely destroying the thing I'm trying to repair
2. Abandoning the repair because I'm stumped
3. Injuring myself.
At least on option 3 the thing gets fixed though right?
Study, be patient, be patient, study, know everything about the item BEFORE taking it apart, and did I mention study? Lifelong mechanic here.
Im lucky All i have to do is look at a machine and within minutes i can fix it and also modify it so it never breaks again by modifying my washing machines a driers in 12 years thieves have NEVER HAD A FREE WAS OR DRY AGAIN. I SOLVE TRICKY PROBLEMS IN MY DREAMS..WORKS TOO.
That's ok , without people like you , people like me would go hungry :)
For anyone that missed Andrew's live stream, go back and watch it, a lot of good information about his plans. I missed the original but watched it the other night and it was excellent.
That's how I feel, Levi! Great video and great closeup of America's favorite Labrador snout!
Every time I get a TH-cam notification I hope it's yours or only 1 other person. I love your channel, Andrew. I've been an operator for 4 years now also laying pipe. Your videos are my Zen. Cant wait to have my own property and toys like you. Thanks for all the awesome content.
Greetings Andrew nice to see you again! Nice weekend 🍁🚬🔥💨💨
3:30 If the grooves you saw in the pin line up with the gap between the links and the boom then they are supposed to be there. You have no doubt seen ridges or grooves worn in exactly that location on old pins. Pre-cutting that smooth rounded groove prevents the sharp edge of a the boom or link ears from cutting into the pin and forming a stress rise.
You can still make a greaseable pin is you cut a shallow helical groove in the center section instead of one all the way around. The groove should be rounded and filed nice and smooth, just like the ones in the intact pin.
Thanks for your videos look forward to every one, Steve in Thailand.
As always, I learn from you. Simple tools work for sure. The only thing I can add is that you may want to use a copper based lube like Never-Seeze or Permatex on bolts and pins - especially the ones that you know are going to be coming off occasionally. Trust me, it makes removal a lot easier and is inexpensive. A usual, Levi steals the show!
The way Levi looks at you I’m sure makes your heart dance.
As winter is passing and the weather has started to clear up, I expect an uptick in andrew videos.
When he was like "Relatively cheap tools, $300 stick welder....I was like...datz not cheap to me...but then again if you have equipment like he does then $300 is a drop in the bucket compared to paying for some of those parts or repairs at a shop for sure.
Look forward to seeing more as always.
Andrew I can't stress enough to you how freaking amazing you are, God bless pal!!!
Great to have you back. I enjoy watching your videos, thanks for sharing your knowledge. 👍👍🇵🇪🐕❤️
Great video!
I can’t believe the museum let you borrow that drill!😂
Andrew, I seriously need a link to that two way ratchet with the pry tool on the end at 2:33. Love the videos, man. You work your arse off AND you film everything. You are a machine, and I for one am grateful.
Around our area, Tractor supply carriers one like that.🙄
there we go thanks for the upload
I absolutely love this. I love fab work and using your brain to come up with garage machine shop hacks to get it done! I love your ingenuity Andrew!
This is very awesome TH-cam channel
Andrew your becoming the true craftsman, great to see your dad out there working with you Im sure it keeps him feeling young even if its just helping you !!! Andrew do you have any plans for a Patreon page in the near feature extra cash flow couldnt hurt equipment, tools, exc.... food for thought !!!
Thanks. I don't want to beg for money like that.
next tool you really need is a dry metal cut saw.. Best investment ever
I’m pretty sure he has one back at the castle.
Best investment ever!!
Hello, Andrew. Only you could say 'give it a few taps' when you mean 'hit it with the sledgehammer'. Cheap tools, angle grinder, drill press (maybe rare). Spring is in full swing here in Dixonville. Sweetie says, "It works good, he's a good operator'. Love to Levi.
I was inspired by Andrews videos so I went out and bought the cheapest welder from harbor freight. I practiced in a t shirt and welding gloves and goggle just like Andrew. An errant piece of slag popped off and burned right through my shirt and embedded itself above my right teet. Guess who has an apron coming in two days from Amazon?
I wear the apron because I got tired of ruining jacket zippers.
Been doing same thing. Im getting good at mig welding. Suck at stick welding
@@AndrewCamarata
Man, I ruined my biker jakket zipper welding. Lesson learned.
Also, it was very uplifting to see you running that 'TombStone 225. That's really how simple my shop is and its rather reassuring to know that you trust and farm box like the one I got. Cheers dude.
Subix Barbarasson zippers aren’t that hard to change if it’s a jacket you like.
@@AndrewCamarata
Yeah. You already know. Priorities......lol. I finally just repaired the holes in my old Karhearts. About 36$ for a new pair but it's a lot less than finding a GF who kan sew. ...... I tend to pikk my battles. ;)
I really like your never say die attitude. You’ll find a way to solve any problem. Great stuff!!
I'd recommend replacing the bushings, the pin probably only broke because both it and bushing are worn out. Its not a fun job but something that should be done.
I agree...
I dont think that pins defective, that machine has 10,000hr on it, that pins taken a lot of use in its life 😂
It's always nice to see a father and son getting along and working together.
Thanks Andrew for the video.
Dear Mr Camarata,
You work so hard and it’s brilliant to see you both enjoying yourselves on the jetskies.
Love the videos
Thank you
Andrew May U.K.
Can't help but be impressed you can put your hand to anything , good work
~~~~ Some pretty clever slick fabrication there ! Grease fitting on the exterior much better....
my favorite part, the levi inspection
I think it’s great that a multi billion dollar company pays big money to have this equipment designed and you show up break it or bend it and show them ( I’m sure they watch your channel also) where their flaws are your the best.
Thanks for the videos. M
Andrew, I sure do enjoy watching your videos.
Id hire this guy any day of the week....innovative and skilled to get the job done then follows up with a permanent repair, like the skill set
That clamp on the drill, workin smarter not harder.
Randy Potter
That was a brilliant idea.
I was going to say the same but I knew it had been. That's definitely one of those "Why didn't I think of that?!" things.
Touch Metrics Actually, Andrew works smart AND HARD. That's why most of us who are here love his channel and videos, besides his persona, charisma and whatever we learn about anything he works on.
He's a not a lazy, entitled millennial sob, like most newer generations nowadays. He's high energy, motivated and hard working 👌🏻
@@V0YAG3R i was obviously not attacking his character, it was a complement to his work ethic if anything as ppl who do things smarter have often done them before. As for your judgement of millennials... this generation works more hours to pay off more school debt than any other in history. I think you're getting your judgements from the evening news. They'll turn you against your neighbor.
Fantastic job! I have never seen pins so nice and tight. Not even factory new! You need a lathe to make those pins!
Cheep is nice but with all the pins you have a lathe would be very worth while
It look like a good start of do it your self video thanks for taking the time for us
Awesome work as always. Something I have done in the past is stack hole saws to center the bigger saw and keep it from walking.
Andrew for President. He can fix anything
At LEAST put him in the Cabinet!
Andrew and Mike Rowe
A great hole saw trick stack those hole saws when you need to enlarge a hole. If you have 3/4" hole and want a 1.5" stack a 3/4 and a 1.5. The 3/4 will guide the 1.5. Sorry if someone else already mentioned this. Great video as always!
You are going to need your own machine shop the way you break things. lol Maybe get your own lathe.
incredible how you get these jobs done. The world needs a lot more Camarats, you should have a lot of kids, make an army of people who fix things.
I love your videos, greetings from Poland 😉
Andrew, you never cease to amaze and amuse me. The clamp on the drill was sheer genius whether or not it was your idea. This rivals the chainsaw dash video for sudden wtf rating.
Cheers from B.C.
"Alright, that's fixed!"
hell yea, it is
nice work
Many times I pushed the thumbs up for your videos and your exceptional work and wonder how genius you are, no exception this time.
Phu. You have almost summer and I still use my snowblower.
Happy summer, from northern Sweden.
You need to come out to Las Vegas NV it was 90 degrees here today.
@@cntslesfabrication It's about 20000 miles, so I'm waiting for the Swedish summer. It will be cheaper. LoL.
@@makingithappen9722 that makes sense the door is always open my friend
@Michael Johnson Jr It is honestly quite nice with the variety, it will be with summer and winter.
Maybe what they should have had was a spiral groove. Very tricky to machine such a few turns with even a lathe so I think you did the right thing. Just have to keep taking it out and greasing - or carry a few self made spares! Interesting as ever. Cheers. BobUK.
200K club on the way!
thread of grease nipple is BSP taper thread for piping ! Welder first tool for a good workshop !!! After the angle grinder --- Put wood in the vice does hold round object better --- like the washer ...! Satisfaction when work is done and came out good ! Take care my friend !!!