I know this was over a year ago but I just found it, as I need to replace the Pto lever and linkage on my ZD331. I just absolutely cannot get my height adjustment knob to come off---yet. The screws and the front lower bolt and nut were pretty straight forward. Thanks so much for taking the time to produce this video.
Lonnie, you are the Man!! Thank you so much for posting this video! It saved me a lot of time and grief in 3-digit heat after my 326's ignition switch failed and needed to be replaced. I tried to remove the throttle lever handle as you did in your video, but mine would not budge. Luckily the plastic housing in that area is very flexible which allowed the control panel to slide over it much like blade control lever did in your video. Thanks again! Rich ✌
I have a kubota zd323 that is getting no power to the instrument cluster, nothing no gauges or key function. Battery is good. Wont start jumping the starter solenoid, it will turn over jumping the starter but wont run. Sounds like its not getting any fuel when jumping the starter. Any ideas what the issue could be?
I know this was over a year ago but I just found it, as I need to replace the Pto lever and linkage on my ZD331. I just absolutely cannot get my height adjustment knob to come off---yet. The screws and the front lower bolt and nut were pretty straight forward. Thanks so much for taking the time to produce this video.
You're welcome
Lonnie, you are the Man!! Thank you so much for posting this video! It saved me a lot of time and grief in 3-digit heat after my 326's ignition switch failed and needed to be replaced. I tried to remove the throttle lever handle as you did in your video, but mine would not budge. Luckily the plastic housing in that area is very flexible which allowed the control panel to slide over it much like blade control lever did in your video. Thanks again! Rich ✌
Your welcome
So this safety switch is the main safety for turning the tractor on? Like if you got off the seat then everything turns off, thats the switch?
No, you should have about 3 more or less depending on the tractor. The brake, the PTO switch and the steering handles should all have safety switches.
Thank you very much.👍
Your welcome
I have a kubota zd323 that is getting no power to the instrument cluster, nothing no gauges or key function. Battery is good. Wont start jumping the starter solenoid, it will turn over jumping the starter but wont run. Sounds like its not getting any fuel when jumping the starter. Any ideas what the issue could be?
Did you check the main fuse?
Thanks
You're welcome
「どうやってやるの？」、
どういう意味ですか
Dōiu imidesu ka