Universal FlipClip Slingshot Band Installation - How to install FlipClips on Scout LT and Hammer XT

This is the SimpleShot Guide to installing slingshot bands using our FlipClipsX on the Scout LT Slingshot or Hammer XT heads. This is a similar process for any other FlipClipX Slingshot models - made to accommodate both OTT (Over The Top) and TTF (Through The Forks) shooting style configurations. Both Scout LT and Hammer XT are great for manually tying the bands on, but we recommend only using the SimpleShot FlipClips that came with your slingshot to secure your bands for best results.
simple-shot.co...
simple-shot.co...
The FlipClip band attachment method is one of the simplest slingshot banding process since the FlipClip can be tightened and loosened without removing them from your slingshot frame. Simply loosen up the clip where the installation will be taking place. Make sure that you have enough room to insert the end of the band. Insure that the inside of the pouch is facing up as you place the band in the grove, creating a trough back from the target side of the slingshot, knowing that it will pull over the top of the forks. Once your bands are in place, tighten up the clip finger tight - and finger tight is just fine, you do not need to over tighten because you can damage the bands if you get too tight. Make sure your FlipClips are snug and that your bands have no twists for a proper over-the-top or through-the-forks band configuration with SimpleShot FlipClips and your slingshot.
For added performance, tune your bands by cutting them to match your draw length. If you don't know how to tune your bands, please
check out our tutorial on our website or youtube to make sure your bands are tuned properly.

[@kasperthelost]

I Love my Scout Lt that's one frame I always go back to.

[@Nazareth434]

Just got mine today- learning the aiming of TTF now=- little different than OTT- love the bands on these- gonna order some more= it fits like a glove almost=- far more comfortable than others i have tried from different companies, and certainly easier to reband-

[@simpleshot]

Thank you for your support.

[@akittredge]

Thanks for the tutorial. Just a note, please upload a 1080p or higher quality video in the future so the details are more clear and definitive.

[@simpleshot]

Noted. We shot this in 4K so not exactly sure how it uploaded so small!!

[@876_rebel]

How long does slingshot bands typically last?

[@simpleshot]

That will depend on the ammo, shooting form, and elongation used but anywhere from 100-1000 shots.

[@BasaysayTv]

The ott always damage sa bands because of its sharp's edge's

[@simpleshot]

If you have sharp edges a fine sandpaper will help. If this is a frame you just purchased from us, please come to our live chats and we can help you out.

[@_g_520]

firsty