7 Causes when Bleeding Brakes and No Fluid is Coming Out

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ธ.ค. 2024

ความคิดเห็น • 25

  • @HenryRandolph-l1v
    @HenryRandolph-l1v 5 หลายเดือนก่อน +5

    Fluid is going to the front drum but no fluid to the back wheels

  • @RonWade-l3c
    @RonWade-l3c 11 หลายเดือนก่อน +3

    Have a 99 Silverado 2500 4x4 broke the bake breakline. Repaired it. Have fluid going to back breaks but mastercylinder is not releasing fluid to the front lines.

  • @isshinryu11
    @isshinryu11 ปีที่แล้ว +1

    Quick. Thanks. Have 2003 honda element. Front brakes locked up. Switched new caliper driver side, no fluid coming out banjo joint. Putting new hose on today. This was the hot wheel. Hopefully passenger side will be ok.

  • @josequiroz4605
    @josequiroz4605 6 หลายเดือนก่อน +1

    I jave to release almost the entire bleeder bolt in order for it to release ant fluid. while the other caliper as soon as I loosen it fluid comes out.

  • @00GreenThea00
    @00GreenThea00 หลายเดือนก่อน

    Thanks for the video.
    I'm bleeding the clutch of a Ford Transit. The reservoir for the brakes and clutch is one. I have only been able to get bits pf liquid out from the bleeding screw, even bought a vacuum bleeder device, but no flow.
    I thought the slave cylinder might be clogged or the valve on the bleeder screw as you mentioned in the video regarding brakes. Do you have any other ideas for the issue in clutch bleeding?

  • @mattcook1080
    @mattcook1080 ปีที่แล้ว +3

    I just replaced my brake caliber and when I unscrewed the bleeder nothing came out then I unscrew the brake line from the caliber and some came out but not a lot

  • @mehdirezaie7182
    @mehdirezaie7182 3 หลายเดือนก่อน

    2007 Toyota Corolla. No ABS. I recently replaced all brake lines, hoses, calipers (front), and wheel cylinders (back). I let the system gravity bleed but could not get any fluid from the right rear bleeding valve. Could it be that the proportioning valve is partially blocking the fluid going to the right rear wheel? took the car to a repair shop but they were unable to resolve the issue either, and charged me $150 for labor. They told me to replace the proportioning valve.

  • @kevinmoua875
    @kevinmoua875 ปีที่แล้ว

    I got toyata highlander hybrid 2006 one the brakes doesn't work I try to breed but only drop fluid little out only

  • @DemolitionOutdoors
    @DemolitionOutdoors หลายเดือนก่อน

    I bought a remanufactured caliper from O'Reilly's and it won't bleed. Brake fluid is coming out of the brake line, but nothing comes out of the bleeder.

  • @Kalicdire
    @Kalicdire 10 หลายเดือนก่อน

    Iv got fluid coming out and the pedal sinks as I bleed it at right front and right rear calipers like it normally should. but when I try to bleed right rear or left front I get very slow fluid flow and no air bubbles. I had to activate abs motor with a scan tool to get the 2 that are working correctly to bleed.
    Because 2 calipers are working correctly then I feel the master cylinder is good. Is there a process to bleed the brakes at the abs module?

    • @Kalicdire
      @Kalicdire 5 หลายเดือนก่อน

      @@brettpeeloff2120 yea I got one, and it worked, my problem ended up being a defective brake booster

  • @DakotaSchultZ-l6z
    @DakotaSchultZ-l6z หลายเดือนก่อน

    I have no fluid and it’s new and I have no fluid

  • @joerusso3424
    @joerusso3424 6 หลายเดือนก่อน

    Ok I have a weird one brand new calipers all around. When bleeding I’m good until I get to the front Rt I get no fluid from the bleeder valve however if I take the hose off the caliper there is fluid pouring out of the caliper itself so it’s getting fluid to it and I have good fluid pressure from the left front. Can’t figure out how there is fluid to the caliper and nothing out the bleeder. Thoughts?

    • @HVAC_Mechanic
      @HVAC_Mechanic  6 หลายเดือนก่อน +1

      There likely is a blockage or issue in the caliper

  • @davedeatherage4902
    @davedeatherage4902 ปีที่แล้ว +1

    Very good, thanks!

  • @cameronskaggs4188
    @cameronskaggs4188 7 หลายเดือนก่อน +1

    Number six number seven I think those are good idea. Maybe it was number five that brand new brakes brand new master cylinder brand new power booster brand new proportion down. I still have no brakes in the back. I’m working on it for a month and a half, and I still don’t know why.

    • @mehdirezaie7182
      @mehdirezaie7182 4 หลายเดือนก่อน

      Hi! Were you able to figure out? I recently replaced new all brake lines and hoses and calipers and wheel cylinders (drum brakes in the back) . I also dont get any fluid in the back.

  • @BenaIbis
    @BenaIbis 2 หลายเดือนก่อน

    Why brake fluid not coming out on front brake line

    • @BenaIbis
      @BenaIbis 2 หลายเดือนก่อน

      Toyota land cruiser 79 series

  • @Sonny1989
    @Sonny1989 10 หลายเดือนก่อน

    I need your help my 2019 was in an accident so I’m guess they replaced the brake booster. It was hard to push pedal and I had light on so I tried to bleed lines! Nothing. Nothing will come out idk what to do