RENAULT CLIO 3 - How To Remove Front Headlight Headlamp Removal (2006-2012)
ฝัง
- เผยแพร่เมื่อ 2 ก.ย. 2021
- Guide on how to remove the headlight assembly from a Renault Clio III (Mk3), years 2006 - 2012.
Tools used:
-10mm Socket: amzn.to/2NWrfON
-T20 Torx: amzn.to/2NWrfON
-Flat Screwdriver: amzn.to/3qRPuMn
-Trim Removal Tools: amzn.to/3pKZtBP
-------------------------------
www.selectvehiclespares.co.uk
------------------------------- - ยานยนต์และพาหนะ
Tools used:
-10mm Socket: amzn.to/2NWrfON
-T20 Torx: amzn.to/2NWrfON
-Flat Screwdriver: amzn.to/3qRPuMn
-Trim Removal Tools: amzn.to/3pKZtBP
Like for good video. Thanks
"Nobel Price" for Clio designers. They are simply the best.
Thanks. Nice clear video. I needed a reminder how to do this. Its mad that you need to do all this just to change a bulb.
You can replace a bulb without taking the front off, but getting the clips to keep it in place is extreme difficult
@@MrJakewray yeah I took me over an hour to change the h7 the first (and only) time. Did the left side. No idé of its harder on the right side. Outside in the dark and no idé how to do it haha. Dropped the new h7 two times down all the way down but had just got a grabbing thing on a wire.
Just changed the right back blinker bulb but it didn't help. Checked the old bulb and it looked OK. Will check the wires.
I didn't realise it was done like that - tedious but not too difficult. Thank you!
Some drama for a bulb change. I've done rhd drivers side no problem without removing the bumper but the passenger side is an absolute nightmare. Thinking to remove the battery and tray to give myself some room. Your way is definitely the correct way. Good video thank you
At least parking/side lights can be replaced on both sides without removing the bumper. You need chopsticks to fish the bulb out of the socket, and even then your hands will look like you've been handling angry cats. When putting the rubber cap back, you have to turn its edges "upside down" to make the cap flatter, then put it into the correct place, and only then "snap" the edges back.
Very useful video. I was able to remove one light without removing both sides of the bumper, fix the problem and then replace it. Thanks.
To change a bulb you need to have a small hands or do this way. Will never ever again buy anything french apart of wine.
You can do it but it takes a lot of pushing and scratches. I had a Volvo before this. Jesus that car was brilliant. The headlights were like a Lego, in and out in 1 minute. This is like rocket science
French car design: I can just get my battery put in super easy but you need 2 mechanics, an array of tools, the ability to dismantel your vehicle with the knowledge of a engineer just to put in a simple headlight.
The most backwards designing in the world😂
Fantatsic Video - very well explainded - step-by-step. Thank you
Crap that's a lot of disassembly for removing the headlights. In my audi a2 1.2 tdi it's two torx from the top then I could just pull them out an change bulbs in seconds. I did manage to change bulb on my clio 3 (2011) in the dark with a headlight, a flashlight, a mirror and a grabbing hook thing on a wire and I'm happy I had the later thing as I twice dropped the bulb down on the engine cover😬. Never changed a bulb on a clio before and it took time and wasn't easy to see or access.
But this video was good for me as a have bought a engine heater (hose type) and need access the hose from down under and maybe need to remove the front of the car :)
Thanks for the help. Managed to install new lights.
Unfortunately I can't get my front bumper back on now! Been at it for 2hrs
1 year later - did you fix it yet?
@@truth.speakerwho needs a front bumper anyway? Extra cooling now ....
Just kidding, all good. Done it a few times now so got the knack for it haha
😂@@randall96
Thank you very much! Easily explained made nice and simple 💪👌
vidéo très bien faite ! très bien expliqué ! un grand merci pour ce travail 👍😉
This is so helpful. Thanks.
That’s a lot of bulshit to take out a headlight. Good video btw
Brilliant clear video, cheers
Great vid ! Immensely helpful - cheers
Excellent video!
Thank You!
Fantastic job thanks big help.👍
Nice and clear, thank you!
Very bad auto
Thank you so much!!
NICE WORKE
Thanks !!
Nice video
Good Job
thank you :)
Dobrze ze silnika nie trzeba wyjąć aby zdjąć lampę
Insane.
Wich Ingenier builds such a Car. ??
Ill never buy a Clio again. But thank you for the Tipps. My Hands are bleeding because i tryed it from the Top from the engine
Basically, you need to disassemble half of the freaking vehicle to change a simple light bulb. Which half-brain designed this?
The briljant people at renault headquaters. When they decided to cut down on provisie at new car sales. As compensation they made the design more complex, so garage can earn more money on repair
French cars for ya
Tu veux qu'on te vole ton optique facilement aussi ?
You don't have to remove all the block to change the light bulbs. If you look at it there are two lids, if you open them, you can access the lights. I just replaced one of mine.
Çok can sıkıcı bir dizayn.Clio 3 için gerçekten çok eziyetli bir işlem.Bir ampul için yapılan yorucu ve stresli işleme bakarmisiniz.🤔Renaultun utancı olmalı bu Modeller.Benim de aynı model icin bir far cami çatlak.Artik tamirciye gideceğim mecburen.Herkesin yapacağı bir şey değil. Sökersin takamazsin Vs birçok sorun.Bir sürü masraf..Size alkış renault tasarımcıları. Sınıfta kaldınız. 😡
Man braucht nur dünne Arme und gelenkigel Hände. Man muss nicht das ganze Fahrzeug auseinander nehmen 😅 Nur Geduld 👍
The French for you
What a palaver, no way I'm doing this.
You don't need to remove anything, simply open the bonnet and you can just remove the covers from the back of the headlights and switch the bulb it's a little bit awkward but you can do it, I just did mine took me 5min
This video is how to remove the headlight assembly, not the bulb.
Changing the headlights of the car is a fucking DISASTER
What a ball ache just to change a bulb