Step 1 sanding together with water - start with 200grit Then 300grit Then 400grit Then 500grit Then 800grit Then 1000grit Then 1200grit Then 1500grit Then 2000grit During sanding always make it wet with water Step 2 Dry it Wipe out with alcohol if available (not necessary) Wipe and remove all sanding powders Step3 Spray clear paint, clear coat smoothly with 2 or 3 layers First spray faster with 15cm far from headlight Second layer after 10 minutes Spray slowly smoothly After 10 minutes will be shiny like new. Tested alot Good luck
you can see them before he cleaned it. now he only need to use high grit wet sand paper to smooth them out and then apply polishing wax, to then coat them with a ceramic spray or use transparent nano ceramic film to protect them from the weather
Наждачка 1000-1200 и прозрачный автомобильный лак. Пять минут и от новой не отличить,а как вы сделали ,фара снова потускнеет,без лака никак.Новая фара покрыта лаком,лак от времени и температуры трескается микротрещинами и забивается пылью и копотью,отсюда и помутнение пластика.
The hardcoat on the PC lens gets damaged after 3y to 5y (average). Polycarbonate (thermoplastic substrate) has a low chemical and scratch resistance. The abrasion process removed the remaining hardcoat and the damaged PC as well. It gets a better appearance for now, but unfortunately, the lack of resistance (chemical and abrasion) will keep accelerating the damage to PC due to chemicals on the car washing and UV radiation damage by sunlight exposure. The way to reduce the damaging process is to apply a protective coating (varnish).
Guys, if you are looking for a solution, buy a magic eraser! Use a little water to gently wipe it off and you will see the difference! I hope it works for you because it worked really well for me. You have to do it every day until they are new. And be careful not to use it too quickly, it wears out faster and you can scratch it, but believe me, it works.
Am I the only one who notices the entire head light changes at 2:53??? The tape isnt even in the same place. So yeah, replacing the entire light will give you much improvement!
Simply cleaning your headlights well can make a big difference too. Maybe not like new if it's really bad but it can make a very noticeable difference in how bright your headlights are. Obviously it helps if you do this on a regular basis and don't let them get really bad. I did this on a 20 year old car on one side and did a before and after test at night with the head lights shining on a wall / whatever and the cleaned side was significantly brighter. Uncleaned side was much dimmer and yellowed. It's something we should get into the habit of like cleaning the inside windows too.
Just a chalky powdery toothpaste on a rough sponge works much much better. After washing off,polish with plastic polish (dashboard polish/spray) to make lights look like brand new
HMMMMM.... LIKE EVERYONE ELSE - we CLEARLY see that you've simply REPLACED all the LIGHT YELLOW HAZE with PERMANENT CLEAR SCATCHES :-| I wonder how many people tried your method, SEEING the now-PERMANENT "FOG" SCRATCHES your method created :-( Me? About every 2 years I stop by the local car cleaning center and one guy pulls out his rotary waxer/buffer and does each lens for $10. When HE'S done CLEANING/WAXING/POLISHING my headlights THEY LOOK BRAND NEW. $20 WELL-SPENT every few years - I highly recommend this to others ! -Mark in North Aurora IL
L'operazione non è finita, con prodotti e spugna abrasiva hai rimosso si il giallo dei fari ma hai anche graffiato la superficie, che andava lucidato con pasta abrasiva e lucidanti con il trapano che hai usato nel video, con spugna sul disco nrotante.
Should a person who rubs a reflector with the sharp side of a sponge and destroys the coating that can only be polished publish such a thing? This is some kind of madness
mano lw...fiz no meu farol agorinha e fica super branco...top mesmo ganhou like,,,,, translation ,, bro thanks...I did it on my headlight just now and it looks super white...top really got a like
In my past experiences, the best thing to do is to order new ones. They will look real pretty and also upgrade the appearance of your ride. Although in time, they too will oxidize and look ugly in the future. Enjoy them when you have them. Nothing beats a great pair of headlights! 😍😘
Its like a cd you have to clean in strait lines, if you circle ⭕ you scratch the disc , so all is good what you done, but do it in all directions from the middle of the light in straight lines 😊 hope it helps 😊
Some side job mechanic once told me to spray wd40 on the headlight cover and after a few days of using wd40 and some elbow grease, it will work. Haven’t tried. Anyone know if this works?
Была хорошая фара, стала фара с 1000000 царапин 🤗
Как ты смотрел видео? Там все эти царапины были ДО!))))
Auweia ist das zerkratzt 👎👎👎👎
Главное ,что уже не желтая.
С тем же успехом снег с песком смешиваешь и пошел маслать.
now you need a new soap, a new lemon AND new headlights 😂
But hey you made 2.3 million people laugh, that was worth it! 😁
😂😂😂😂😂😂😂😂😂😂😂😂you are craaaaazyyyy😂😂😂😂 and new headlights 😂😂😂
Wow, very professional work, if you like thousands of scratches on your headlights, then this is the way how to do it ;)
Step 1 sanding together with water
- start with 200grit
Then 300grit
Then 400grit
Then 500grit
Then 800grit
Then 1000grit
Then 1200grit
Then 1500grit
Then 2000grit
During sanding always make it wet with water
Step 2
Dry it
Wipe out with alcohol if available (not necessary)
Wipe and remove all sanding powders
Step3
Spray clear paint, clear coat smoothly with 2 or 3 layers
First spray faster with 15cm far from headlight
Second layer after 10 minutes
Spray slowly smoothly
After 10 minutes will be shiny like new. Tested alot
Good luck
Just smart can get it, people become more and more stupid
I will try. Thanks for the information.
Can also just clean thoroughly with Methylated Spirits, no sanding required, then spray with clear coat once dry
Just use T-cut FFS
🤣🤣🤣. You don’t need all those grades of wet n dry
Finished product looks terrible
Like your m....r😅
It looks better than brand new... !!!NOT!!!
@MrMantis1990 good one really got him with that one bro 🙄
قشنگ رید توش 😂 با چه اعتماد به نفسی هم نتیجه کارش رو یعنوان موفقیت نشون داد ! 😂
Ещё надо обязательно добавить острый перец и лавровый лист.
Нет, не поможет, я проверял, ответ оказался прост, нужно было клеить синюю изоленту
От души😂 поржал)
😂😂😂😂😂😂 hai vinto tutto
Ganz großes Kino, ich lache mich tot!
Ich auch😂
I see scratches now😢
Do you think they weren't there?
@@FixItFast1 yes
you can see them before he cleaned it. now he only need to use high grit wet sand paper to smooth them out and then apply polishing wax, to then coat them with a ceramic spray or use transparent nano ceramic film to protect them from the weather
You ruined it... Full of scratches
😂😂😂😂😂
Nice way to create millions of lines in the headlights.
Hi! It's not true 🤕This method is really useful - TRY IT!
Sorry I don't see the difference
😂 same
Same here😂
Me either. If anything it’s really scratched now which will mess up the visibility just as bad as the yellowing.
😂😂😂😂
genius if we can spot the difference. 😂
Не знаю как это сработает, но за лайфхак с шуриком вместо миксера лайк😊
😂😂😂😂😂 soll das jetzt sein? Schade um die Zeit was ich verbracht habe diese video zu schauen 🤦♂️
hast vergessen noch 2 Eier mit drin zu schlagen 🤣
I just leave mine yellow, it saves all the hassle of doing this. I hope this helps someone. 🙂
Хахахаха Хахахаха, зацарапал всю фару, я у мамы инженер😂😂😂
If you use a 1500-2500 grit and wet sand paper you can get the scratch’s out also.
Aynen öyle ok
Jó nagy pofont adtál a semminek! :-)
Try T cut original car polish. Less hassles and works better than that. We do it every day at work and charge $ 35 . Easy money. 6.35pm.
Estava pesquisando sobre roda amassada e cai nesse video do neida! Kkkk e o cara acabou com o farol, riscou tudinho kkkk 😂😂😂😂 que loucura.....kkkkk
Наждачка 1000-1200 и прозрачный автомобильный лак. Пять минут и от новой не отличить,а как вы сделали ,фара снова потускнеет,без лака никак.Новая фара покрыта лаком,лак от времени и температуры трескается микротрещинами и забивается пылью и копотью,отсюда и помутнение пластика.
А для просмотров и лайков это не мешает. Здесь задача хайпануть.
Tava só queimado! Agora tá queimado e arranhado! Sensacional 🎉
It's false, I'm a mechanic and it's no use doing that, in a few days it's worse again, the way to do it is by sanding the headlight
WD40
I only used Parodontac toothpaste - worked fine for me
All I see is a damaged headlight😮
Need laca final touch
Same. It has to use real product and tool. Waist time fuck z
Dude has 312k subscribers!!! If everything he posts is the same quality as the above, I ask how???
I ask how how how 😂😂😂
youtube algorithm is like human taste: cares popularity, not quality.
Baking soda and water works fine on plastic,just tryed it
Jó karcos lett.
Das ergebniss überzeugt mich nicht wirklich
Be easier to use 800 1200 3000 wet and dry then rubbing compound or even tcut .
Never imagine it would looked the same!!😮
The hardcoat on the PC lens gets damaged after 3y to 5y (average). Polycarbonate (thermoplastic substrate) has a low chemical and scratch resistance. The abrasion process removed the remaining hardcoat and the damaged PC as well. It gets a better appearance for now, but unfortunately, the lack of resistance (chemical and abrasion) will keep accelerating the damage to PC due to chemicals on the car washing and UV radiation damage by sunlight exposure. The way to reduce the damaging process is to apply a protective coating (varnish).
Il video è molto reale. Il faro è comunque migliorato.👍
Use car polisher with smooth head and G10 compound It will give you much better results
You’ve completely mullered those lights, well done, 😂😂😂
In my opinion the result is just acceptable. Does is last long time?
nope
Берётся шкурка N1000. Снимается глянец, обезжиривается и наносится специальный лак для оптики. Я так себе сделал и очень доволен результатом.
But how long does it take to get the headlamp out of the car?
Jó karcos lett a bal oldal.. hát nem tudom kinek éri meg ... mellé még be is mattult a felület... lehet többet árt mint használ...
unbelievel.. what a magic.
Ficou todo riscado da esponja 🎉 parabéns 😂
o meu ficou top kkk c nao soube fazer,,,usa olado amarelo da esponja
Guys, if you are looking for a solution, buy a magic eraser! Use a little water to gently wipe it off and you will see the difference! I hope it works for you because it worked really well for me. You have to do it every day until they are new. And be careful not to use it too quickly, it wears out faster and you can scratch it, but believe me, it works.
You shouldn't have done that with the abrasive side of the sponge. The other side would give better results.
Félicitations.. vous avez définitivement gâché votre phare de voiture 😊
Am I the only one who notices the entire head light changes at 2:53??? The tape isnt even in the same place.
So yeah, replacing the entire light will give you much improvement!
Simply cleaning your headlights well can make a big difference too.
Maybe not like new if it's really bad but it can make a very noticeable difference in how bright your headlights are.
Obviously it helps if you do this on a regular basis and don't let them get really bad.
I did this on a 20 year old car on one side and did a before and after test at night with the head lights shining on a wall / whatever and the cleaned side was significantly brighter. Uncleaned side was much dimmer and yellowed.
It's something we should get into the habit of like cleaning the inside windows too.
Это делается обычной полиролькой, только без уф лака фары пожелтеют через 1-3 месяца🤷
From bad to worst is the difference, but i like the music. Very nostalgic
Сода нейтрализует кислоту,так зачем их смешивать?
exactly what I'm wondering
Perché non sa quello che fa, addirittura il miscelatore...
это специально сделано, что бы фара не отполировалась.
At least it's an honest video. The result is average but it's better!
All the tips and simple processes are enriching.
THANKS
"sometimes if you listen carefully you can hear my genius" - Jeremy Clarkson after inventing something completely nonsensical
You forgot to throw some eggs in there..
I used Meguirs 2 step headlight resotoration kit with a very fine result!
I say it's time to get a new headlamp assembly. Still has a ton of imperfections when done.
AMAZING ! 😂 🤣 😂 I WONDER IF THIS WOULD WORK ON MY TEETH ?
Or use toothpaste on the headlamp?
Dalej są matowe , ja kupiłem zestaw papierów i past polerskich za 60 zł i zrobiłem w godzinę dwie sztuki nie do poznania
Just a chalky powdery toothpaste on a rough sponge works much much better.
After washing off,polish with plastic polish (dashboard polish/spray) to make lights look like brand new
High grit wet and dry, cutting compound polish, polish, wax.
HMMMMM....
LIKE EVERYONE ELSE - we CLEARLY see that you've simply REPLACED all the LIGHT YELLOW HAZE with PERMANENT CLEAR SCATCHES :-|
I wonder how many people tried your method, SEEING the now-PERMANENT "FOG" SCRATCHES your method created :-(
Me?
About every 2 years I stop by the local car cleaning center and one guy pulls out his rotary waxer/buffer and does each lens for $10.
When HE'S done CLEANING/WAXING/POLISHING my headlights THEY LOOK BRAND NEW.
$20 WELL-SPENT every few years - I highly recommend this to others !
-Mark in North Aurora IL
Um trabalho de trampa
What ever polish you use to polish the body of the car have the same effect on the cleaning of the head lights .and my lights are Cristal clear
😢If before it was yellowed, Now it's even striped 😅🤣😂
yes 👍
Criticism is easy, so suggest better
Holy crap, Ha Ha Ha. Dude, it's all scratched to hell!
L'operazione non è finita, con prodotti e spugna abrasiva hai rimosso si il giallo dei fari ma hai anche graffiato la superficie, che andava lucidato con pasta abrasiva e lucidanti con il trapano che hai usato nel video, con spugna sul disco nrotante.
Wenn der Scheinwerfer nach der Vergewaltigung jetzt ein TÜV bekommt dann bin ich der Heiliger Peter 🤣
Toothpaste works great on your headlights and your teeth.
Heavy duty degreaser also removes yellowing without using abrasive sponges. Then all you need to do is sand and polish after
Good tip, tq
Thank you😊
What is the music track ? It was great !
From the look of your result, you still had a LOT of work to do to get lens up so value
Смешивать щелочь и кислоты и ждать эффекта, это гениально🎉
Uimitor teaș ruga sa nu mai faci asta îsi vor strica și alți farurile din cauza ta .tine pentru tine tâmpeniile astea 😢
less yellow but x100 more scratches, are you actually proud of the result????
all the stars same as actors and singers make somthing diffrenet same what u did so u star too 😁
vsak bedak pametuje
Should a person who rubs a reflector with the sharp side of a sponge and destroys the coating that can only be polished publish such a thing? This is some kind of madness
Hat sich nix geändert 😮 schade lohn sich nicht aber ein like für dich da du dir si eine mühe gemacht hast
Discoloration mostly gone but still damage... Maybe this one requires an a little more abrasive solution? ;)
Svašta sam radio i na kraju kupio novi pozdrav izvođaču
Я уже устал делать фары после таких умельцев которые всякую хрень в ютубе смотрят
Still looks foggy tho, friend. I think 800 to 1000grit sanding is best
Thanks. Won't be using this method.
Была фара прозрачная с налётом, а получилась фара матовая из царапин. Гениально😂😂😂
mano lw...fiz no meu farol agorinha e fica super branco...top mesmo ganhou like,,,,, translation ,, bro thanks...I did it on my headlight just now and it looks super white...top really got a like
...so whar are there no scratches on the yellow part??
In my past experiences, the best thing to do is to order new ones. They will look real pretty and also upgrade the appearance of your ride. Although in time, they too will oxidize and look ugly in the future. Enjoy them when you have them. Nothing beats a great pair of headlights! 😍😘
Does that work on teeth? 😊
Its like a cd you have to clean in strait lines, if you circle ⭕ you scratch the disc , so all is good what you done, but do it in all directions from the middle of the light in straight lines 😊 hope it helps 😊
Вот значит кто мои фары поцарапал, а я думаю откуда у меня царапины на фарах взялись 😂
Sand paper works the best😊
Quedo super rallado
Разницы нет, но бонусом к лайфхаку царапины прилагаются, как дополнительная опция 😂
Some side job mechanic once told me to spray wd40 on the headlight cover and after a few days of using wd40 and some elbow grease, it will work. Haven’t tried. Anyone know if this works?
If its a beater just apray it with bug spray and wipe it. Doesnt last long but you just need it to be see through
Creo que rayó la lámpara,el lado de la esponja que utilizo,es abracibo,era del otro lado de la espiga.el bicarbonato con limón, también funciona 😊
Does it work if i leave the headlight attached to the car!?😅
You might scratch the paint.
What is the point mixing lemon(acid) and soda(alkaline), they neutralized each other
Метод гениальный для старой фары, но вот только не 5 минут, а 50.
Абразивом ушатал фару и доволен
Żółta może i nie jest ale porysowna profesjonalnie
hello, I wish you success on TH-cam.
You really show real thank you