Absolutely this. Tesla glass is already hard to align properly after removal, you definitely don't want to make that even harder or impossible by getting the wrong cut line! They need to be as symmetrical as possible.
At first this looked like a janky build but I've been following along and I was way too quick to judge. Looking mean man, you're doing a great job! Can't wait to see the finished product.
A huge congratulations for getting this far in the build its looking amazing. I love the fog lights really cool. I can't wait for you to enjoy this beast.
I found out the tip about getting the high position windows when I did my video about replacing the puddle lamps. Glad you found it! Looking SOOO sick!
I had all most thought you had given up on this ! But Ma man came back SUPER STRONG looks amazing!!! This car should be satin black and some extra shinny black on the trim and super white seats
The rear glass looks great, but you should add some sort of drain port so water doesn't pool. Also, can you just modify to turn the bulbs/projector 90 degrees inside the fog light housing?
Just incredible… Regarding the door glass-have you checked with a hot glass studio to see if the can make it? They would create a mold and form it to the curvature you need. Just not sure how perfect they can get it.
What about taking a diamond glass blade and put it on the angle grinder and cut the glass with that had a little bit extra so you can use sandpaper and smooth the edge
Use the busted one for them to practice on I know there’s not much left of it but still, at least you’ll know if it doesn’t break it anymore than you’re probably good to go
I know you just primed but you need to add some seams to the rear. Those sharp coroners and flat decks covered in bondo will flex. The bondo will eventually crack and ruin the paint.
that is not your only option... you make the glass template out of the same thinkness aluiminum... then you can bend it to the proper shape as well as cut the correct shape.... then you can send you aluminum template in to have a mold made and then they make the glass... this process has been done for years....
The windows are laminated glass so if yu go to a class company and talk to them they have the right cutters that will cut it down and heat the lami between the glass and then cut it that should work
Looking great. Might be worth making a fiberboard template for window glass to check fit while you figure out how to get cut/shaped.
Absolutely this. Tesla glass is already hard to align properly after removal, you definitely don't want to make that even harder or impossible by getting the wrong cut line! They need to be as symmetrical as possible.
Single handedly changing the automotive world
Idk who u are but your my biggest supporter 🫡😄
@@cyber_hooligan And you are the hardest working TH-camr in the business.
At first this looked like a janky build but I've been following along and I was way too quick to judge. Looking mean man, you're doing a great job! Can't wait to see the finished product.
A huge congratulations for getting this far in the build its looking amazing. I love the fog lights really cool. I can't wait for you to enjoy this beast.
Парни, вы лучшие! Безумно красивый проект, судя по всему еще и сделанный с умом
Can't wait to see what it looks like with all it's glass in place!!
Man I loveeee this build! One of the best of TH-cam, wish you had sponsors for weekly uploads and to get this out to everyone! Sema winner!!
I found out the tip about getting the high position windows when I did my video about replacing the puddle lamps. Glad you found it!
Looking SOOO sick!
Wow well done . So happy to see this project nearly finished and can see pride in your face. great job pal!.. 🙂
Amazing, the patience that you have is out of this word!
Great work!! Thank you for the update. Can't wait to see the end results!
I have no idea how many times you have removed each panel to put it back on. That alone is impressive. Keep up the excellent work. 👏 😮
Those little lights are in the perfect position! Nice job
That design looks crazy.......Whoa!
This car is looking great. I am looking forward to the finished product.
This is looking so slick. Keep up the awesome work dude!
Keep doing your thing bro. It looks sick!!
Love what you are doing.
Wonder if you can present it to elon when your finished
Looks awesome!!!
I love this build ☝️✌️
Crushing it!
Can't wait for the final results
I had all most thought you had given up on this ! But Ma man came back SUPER STRONG looks amazing!!! This car should be satin black and some extra shinny black on the trim and super white seats
Keep up the great work
sick design
Keep at it! Its so cool.
Super cool original and hard work. chop top model 3 and metal aero design is quite rad.
looking good
Looking good now, actually looks good in matt pink primer ha
Well Done!
man, that looks sick!
yo that's looking dope
So awesome
Nice job
wow nice design and project bro... looks like games car
Eddie at Kotto Auto Glass cut down a huge Impala windshield to fit a little 1973 Saab 96 for the TV show Wheeler Dealers.
That’s sick! You need to mass produce that kit.
The rear glass looks great, but you should add some sort of drain port so water doesn't pool.
Also, can you just modify to turn the bulbs/projector 90 degrees inside the fog light housing?
Everything except the center of the front bumper cutout in the middle of the bottom of the bumper looks good.
cant wait to see it driving around, :O
Just incredible…
Regarding the door glass-have you checked with a hot glass studio to see if the can make it? They would create a mold and form it to the curvature you need. Just not sure how perfect they can get it.
Nice
Little question, are you gonna do a resume of the build? I would like to see how it’s started and how it ends :)
You deserve to be recognized by Tesla bro
The side windows will fit if you limit the travel to to the top, then you will not need to cut it.
Can you not crack those fogs open and rotate the light assembly 90 degrees?
On the rear glass, are you adding protective weather stripping? Just thinking how it would be affected by rain.
🔥🔥🔥
🔥🔥
The foglights look amazing! No way that would get approved herein europe!
Was about to comment the same. Do they not have to comply to any regs out there?
IMO, in the near future people will design their own cars and spec them and have them built and delivered
🔥🔥🔥🔥
Have you tried a oem factory that can manufacture the glass to spec i know some factories in india that can do that you can look something up
What about taking a diamond glass blade and put it on the angle grinder and cut the glass with that had a little bit extra so you can use sandpaper and smooth the edge
Not a Tesla dude at all. But holy fuck. This is incredible.
Use the busted one for them to practice on I know there’s not much left of it but still, at least you’ll know if it doesn’t break it anymore than you’re probably good to go
I know you just primed but you need to add some seams to the rear. Those sharp coroners and flat decks covered in bondo will flex. The bondo will eventually crack and ruin the paint.
that is not your only option... you make the glass template out of the same thinkness aluiminum... then you can bend it to the proper shape as well as cut the correct shape.... then you can send you aluminum template in to have a mold made and then they make the glass... this process has been done for years....
Looking at the back window have you thought about water drain so you wouldnt have sitting water
👍🏻
I hope you succeed in cutting the glass with water jet
Glass cutters professional glass cutters
The windows are laminated glass so if yu go to a class company and talk to them they have the right cutters that will cut it down and heat the lami between the glass and then cut it that should work
Damn that’s almost $1000
I've cut glass for years with a wet tile saw.... consider that
U have to pt alcohol on where u want to cut it. Then lignht it up and then cut it
You could have used CAD, Cardboard Aided Drafting.
definitely the water jet would be better
do half glass in the back like a v8
Might want to check Your States DOT regs concerning those lights just to be on the safe side.
Elon gonna hit you with copyright and take the cat when you’re done, watch
Or hire him
Cut the glass under water so it wont shatter.
Urine would be better for the procedure overall.
CarTube is getting caught slippin on this. Not got the views or recognition it deserves
rigghhttt? i don't understand howww, someone needs to plug this on their channel so it get's some attentionnn
I don't think you can have lights facing outward!
Why not just taking the base glass and put it on the new one and sign on the old one.
Ever heard of 3D printing?
Calibrate the window so it rolls up only half way? Naaah, let's just cut the glass.
Figure it out man what is wrong with you
афигеть я в шоке от проекта ! привет из далекого Казахстана