ProLux tutorial: self-loading dolly "Sprinter 90/900" correct installation

To the product:
▶▶ www.prolux-shop.com/sku/440305
▶▶ www.prolux-shop.com/sku/440405
Attaching the dolly:
0:07 The chain lock must always be open when attaching and detaching the chain lock to the vehicle wheel.
0:12 Open the self-loading dolly by pressing the inner and outer parts together and then open the chain lock. Keep the chain lock pressed with your foot. By releasing the inner and outer parts, the self-loading dolly opens automatically due to the pressure spring.
Position the self-loading dolly in front of the car's wheel and open it by means of the chain on the self-loading dolly until you can lift the self-loading dolly under the wheel. The chain must be engaged at the setting of the square tube.
0:23 Lift the self-loading dolly under the tyre to be lifted and align the track so that straight running is ensured. Make sure that at least one tread claw engages the tyre tread.
The upper support levers must not be set upwards! Otherwise, due to the design, the carrying levers do not develop any leverage effect and damage to the tow dollies may occur.
0:30 Put the lifting key on the chain winch as far as it will go. Tighten the chain winch by turning it to the left with the lifting key until both support levers lift the vehicle wheel approx. 30-40 mm. The upper support levers must be in contact with the tyre and at least one tread claw per side must engage in the tyre tread.
0:51 Turn the chain lock until the lower pin is in contact with the spring holder. The chain lock is now secured.
Once two self-loading dollies have been properly installed on a vehicle axle, the vehicle to be towed is ready for transport.
Removal of the self-loading dolly:
1:08 To lower the self-loading dolly, turn the chain lock so that it is no longer in contact with the spring holder.
1:17 Use the lifting key to turn the chain winch slightly to the left until the chain lock is unloaded. Press the chain lock with your foot and turn the lifting key to the right until the wheel is on the ground.
Remove the self-loading dolly and close them again using the two pins on the chain winch.

[@frankfear5586]

Per trasportare una vettura non ci vanno le cinghie di fissaggio?

[@ProLuxSystemtechnik]

Ciao Frank, il video mostra solo il processo per caricare la vettura. Se il veicolo viene trasportato, deve essere assicurato certamente con delle cinghie. Per esempio: www.prolux-shop.com/sku/500515. Se avete domande in merito, contattate il nostro team di supporto al [phone]. Il vostro team ProLux