How to Replace Blower Motor Resistor 05-15 Toyota Tacoma
ฝัง
- เผยแพร่เมื่อ 14 เม.ย. 2020
- Buy Now!
New Blower Motor Resistor from 1AAuto.com 1aau.to/ia/1AHBR00121
The heat and air condition fan is controlled by a separate module, called the blower motor resistor. The nature of this component’s job causes it to heat up frequently, which can lead to failure. If your vents will only blow one speed, this is likely the cause. TRQ has a new resistor module made specifically for your vehicle. This video shows you how to install it yourself in your 2005-15 Toyota Tacoma
• Check here for more videos on the 2005-15 Toyota Tacoma • Toyota Tacoma 2005-15 ...
This process should be similar on the following vehicles:
2005 Toyota Tacoma
2006 Toyota Tacoma
2007 Toyota Tacoma
2008 Toyota Tacoma
2009 Toyota Tacoma
2010 Toyota Tacoma
2011 Toyota Tacoma
2012 Toyota Tacoma
2013 Toyota Tacoma
2014 Toyota Tacoma
2015 Toyota Tacoma
Tools you will need:
• Pocket Screwdriver
• Wire Cutters
• 7/32 Inch Socket 1aau.to/oaF/1AXAA00018
• Socket Driver
• Socket Extensions 1aau.to/oacp/1AXAA00015
• Swivel
• Heat Shrink Tubing 1aau.to/oh/1AXSS00013
• Heat Gun
Subscribe: / @trq
Check out our playlist:
Toyota Tacoma 2005-15 2nd Gen: • Toyota Tacoma 2005-15 ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - ยานยนต์และพาหนะ
![BOWKYLION - เจ้านายคะ (work-life imbalance) [Official MV]](http://i.ytimg.com/vi/6bFj8G2pOi4/mqdefault.jpg)
![มองหน้ากันไม่ติด (Awkward) - โอ๊ต ปราโมทย์ FEAT. MAIYARAP [Official MV]](http://i.ytimg.com/vi/4b02SY_r6Gw/mqdefault.jpg)
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
What is a 7 30 seconds bit….
@@gabrielcastro4540 7/32 drill bit
Did you disconnect the battery?
Did you disconnect the battery?
Toyota gave me a quote for $600 and that was just for the labor, I had already bought the replacement part myself. Told them I'll fix it myself, thanks for the video!
Great tutorial. I finally got my blower to work on all settings after five years. I really appreciate it.
Thank you for saving me time and money. Cancelled my service appointment at Toyota and thanks to your video got it done. Very clear
finally a tutorial with all the BS cut out!!! thanks man
+Andrew x Thanks for watching our video! 1aau.to/m/Shop-TRQ
Nicely done video. And great thanks for using a fixed camera and not trying to do it with one hand while holding a phone! It makes the video watchable.
I've been cutting my own hair for some time now. I've never been able to get the fade quite right, and time I do, it takes me forever. I've seen a lot of videos and I must say that your explanation and tutorial is by far the best I've seen. Thank you for sharing.
Great video! I followed all of these steps and my A/C is working perfect now. Thank you so much!
best video ive watched for this problem. appreciate showing the crimp/heat connectors. wasnt sure how to use those.
Great video! Thank you. Just an FYI Toyota sells the same part, apparently upgraded for about the same price as an aftermarket. It has a slightly different configuration of the harness that connects to the resistor but as long as you connect the four wires to the same colours you’ll be just fine.
Changed mine out today, lucky for me I didn’t have any burnt marks so I only had to replace the resistor. 5 min fix. 🙌🏻 It’s working for now.
Thank you! Thank you! Thank you! Toyota service department wanted $555 + tax for this repair on my 2006 Tacoma. I watched your video and got the replacemnt kit from O'reilly's for $55. Did it in an afternoon and all four settings work like new. 👍👍👍
I noticed you skipped fan speed 3 tho. Just saying. Lol all kidding aside I found your video to refresh my memory, I replaced mine when I bought the truck 9 years ago and it has broken again. Sure I could buy the OEM resistor but I'm cheap. It all came back watching this. Thanx much.
+@tbok75 Thanks for watching our video! 1aau.to/m/Shop-TRQ
Did mine today, resistor and blower motor. Thank you for this remarkably informative video.
I am on my lunch and tried to run an errand. It’s hot here in Austin TX. The wiggle helped and I will order the part soon! Thank you!
Great job with the instructions/video. Thanks for this. I actually looked at it and others and noticed it is mostly burnt contacts. I just sprayed some CRC contact cleaner in both the connector and the resistor module and everything is working perfect now. Only been a week now so will see.
Great tutorial, thank you!
Worked like a charm! Thanks for taking me through that!!!
Good tutorial. It really helped me replace my blower and resistor after mine went out in 100 degree summer.
Thank you for the video. This helped me tremendously.
Perfect instructions. Very simple job. Thanks for the guide!
Thanks for the upload dude! Was able to get it all switched out and looking professional with the tips added like cutting the wires at separate lengths. Doing God’s work over here my fren lol
You saved me tons of $ and time...thanks! Well done on video instructions 👍🏻
+ziegler61 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
Great teacher
Amazing, thank you. Got it working
YES!! thank you thank you! got it done myself at home!!
THANK YOU DUDE just got mine changed youre a legend
Thank you! Great instructions and into the fix we go! Appreciate your expertise 😊
GREAT video. Thank you!
Fantastic video. So easy to follow and fixed my issue. Thank you so much! Any chance you have one for the common issue of the seat warmer connector?
Does the resistor block 'thingy' have to be put back into the hole and reattached with screws for this to 'work'... or will it work if you just lay it on the carpet one the wires are re-conected? I am trying to test out the wiring of the new harness but I am still not getting the fan to come on... I haven't pushed it back into the hole yet. Doesn't seem like that part shows it needs to be put in the hole. For about a year, my fan only worked on high... 3 days ago, it stopped working at all. I had hoped that this part I ordered and received a while back would save me... but I can't get the new resister thing and wiring harness to work. I've checked a few fuses... but the look ok to me.
Is it necessary to change the connector when switching out the resistor?
I replaced mine about a 1 1/2 years ago , ordered my resistor off am@zon ,,,and i noticed the other day my fan was back to just high again ...So i replaced it again today ,,,,hopefully this one will last for awhile ...My harness looks fine , but if this one doesnt last i'll put on the new harness next time ..
Very good ! Muy bueno. 😊
Do you have any videos for a 2016 tacoma? I cant seem to find the blower motor resistor in it
On my toyota tacoma 2014 my ac fan turns on only on hi . Lo and the next 2 dont turn on only hi. If i replace the motor blower resister will that fix the problem
Why Would it be necessary to shrink tubing being there shouldn't be water under there? Or does it help secure connections?
Great video thanks *****
Thank you
Have you see the new resistor and connector Toyota has for the blower resistor? Has anyone used this new type?
I also need to replace the pigtail to the Motor blower since it’s suffered some shortage. Can you show us how to attach a new Pigtail Connection to replace the damaged one? TIA 0:51
In my Tacoma, the wires in first small connector you disconnected are old, crusty, and comming out of the connector, do you know if theres a full wire harness I can buy to replace the whole thing?
What size are the mounting bolts? The resistor and bolts are missing from my truck.
Thanks !!
+Ryan Jerry Thanks for watching. Buy the part in this video on 1AAuto.com: 1aau.to/m/Shop-TRQ
I noticed that you skipped speed 3 and went straight to speed 4, does this support all 4 speeds? Thanks.
Do I need to disconnect the battery first?
I have a question more than a comment, my A/C works only on hi so I purchased a new resistor, pulled out the old one put in the new one and I get nothing? It doesn't even come on an any speed?? any suggestions as to what the problem is?, I did notice that the connector did have a small burn on it and I have not replaced it yet, do you think that could be the problem as to why the new one doesn't work at all? Believe it or not I have replaced it with 2 different new resistors and gotten the same result....nothing.
Any suggestions would be greatly appreciated.
thanks
Hi I replaced the resistor and the wire sequence to the harness was different from what you had…
What a great video.... thanks
What did you use as heat to skink the connector?
He used a hand held butane torch. Not sure it would be required to shrink tubing as there shouldn't be moisture under there.
If I don't see burning on the connector can I leave it as is
2005 Toyota Tacoma with 95,000 miles and the fan turns on intermittently. I was hitting the front panel to get it to work occasionally. Replacing the resistor might be the fix I need. Thanks.
+Christo Clark Thanks for watching our video! 1aau.to/m/Shop-TRQ
The screw on the back is a pain, you absolutely need a universal to properly remove, when installing don't over tighten the front screw before starting the back screw, if you do, it will place the resistor in a cock position and make more difficult to install back screw.
what's the bolt size? thank you
I need this video for a 5th gen 4runner
PLEASE HELP!! did this procedure and now high will not work, 1-3 does but not high. Replaced resistor harness and blower PLEASE HELP!!!
I have 2023 Toyota Tacoma I can’t find my resistors if can help ?!!!!!!
Can I get a list of all tools/items that will be needed? Thanks
Was that a hole burned into it?!
I lost the order of the wires, any tips?
The blower on My AC isn’t blowing at any speed including the highest. It is most likely a bad resistor? TIA.
Where is your blower located
Lacking lots of important information Toyota bolt sizes are metric. The Sizes the screws removed are 5.5 mm
Did anyone else have an issue where all the settings work on full blast now?
Hi I replaced the resistor and the wire sequence to the harness was different from what you had…So I switch the wires to mirror what you had and the logo still doesn’t work and now it’s all on high did I blow the resistor? And then switched it back to how it was before I watched your video and the same result only the higher works and all settings thanks for any suggestions
+Tony Taibi We appreciate the feedback. Sometimes there are multiple ways to accomplish the same repair. 1aau.to/m/Shop-TRQ
Do you have to disconnect the battery before you do this?
+Leo Tolentino Thanks for watching! You do not need to disconnect the battery when performing this repair.
Good question! And thanks replying. Cheers!
I did this and now its on high on all the settings. 😂 Anyone know what i did wrong? pls let me know.