Some good comments being made in the comments, but they're still limiting their thinking - with a "flat deck" one can effectively palletise* other plant as well. Think large welders, large emergency pumps, emergency generators, etc, that are too small, and or light, for a "J" or shipping container platform to be required or cost effective. Hire companies and government/state/municipal/utility companies may be a natural market for these. *As a kid I was enamoured with the whole Thunderbird 2 concept - use a standardised container and you can use the same machine to move everything. I still try and apply it to plant in general, when allowed.
@@Dirtmonkey A concept that has ran thru my mind about this style trailer is to have a half flat deck and half enclosed setup. That was you could use the back half that is flat to load or transport material to the jobsite or as stated put a large pump or welder on and use the front enclosed area as a mobile job box to store and secure tools this could even be fitted with a fuel tank to allow on site fuel, tool, and storage.
It would be nice to see if the company can build you a sealed, lockable Job Box roll-off. When doing a job like a retaining wall, you can deliver the box to the site first with all the necessary hand tools, power tools, basic supplies, and the small plate compactores. Everything you need at once and a secure place to store the equipment at night. At the end of a job, pick it up and move it to the next.
I'm third generation in the solid waste industry aka garbage man...lol. In 1960 my twin uncles had built the very first Roll Off truck. They called it a Drop Box truck with 20 yard boxes. My uncles worked for their mother, my grandmother who owned the the first garbage company in town. She only invested in the build of the truck and didn't patent the Drop Box idea back then. !!!CAUTION STANLEY!!! I drove a Roll Off back in the 80's for 11 years and the one thing you had to watch out for was boxes loaded to one side with dirt or concrete, they flip over on there side when loading on the truck. I would pound the sides of the box and if it sounded hard it was loaded heavy to one side and you couldn't see it for each load was full of other debris and tarped. Even at that. be careful on turns, they will roll over easy if loaded heavy on one side. I could show you all kinds of tricks we used to do loading/off loading in difficult areas. But I live in California 🤐don't tell anyone!
My experience has been on the consumer end of the business, getting a dumpster for remodeling jobs. My projects are usually on the smaller side so I can often handle things with my single axle dump trailer. The last time I had to price dumpsters I called three ‘different’ carting companies and the same person answered the phone each time. All three were owned by the same parent company. Usually here in Connecticut you get a price for a certain volume, say 12 cu. yds, a week to fill it and a weight limit, say two tons. If you keep it for a longer period of time they add on a certain amount per day. If the can is over weight when they dump it they will bill you, as in charge your credit card, for the overage.
I'd love to see a full in detail video of this trailer. Of you using it. Setting it up. And ideas u have for it. As a yard maintenance man myself I'd modify one bin to turn it into a grab and go leaf connection system. I.e. I can drop it on a site for some of the guys to use and go back later to get it.
I have actually thought of something similar to this after looking at used military roll off trailers but they use a crane. You can have a flat bed that you strap equipment to and deliver to the next job site and then a dumpster like that one that you set some where else. And then even use another flat pallet and built an office trailer on it and put that somewhere else.
I was actually looking into doing this about 7 years ago there’s another company building these for a while now I believe it was a southland trailer and you can get them in tri axle goose neck and up to 25 or 30 yard bins and you can get a heavier gavel box and a flat deck with d rings as well
Given its trailer based I get the tarp mounted to the container, but that is definitely a vulnerable to damage when loading with a mini X or skid! I recently packed a truck camper in an open top using a mini X with a thumb had junk everywhere on all sides ha. Great video I love your editing
Great video, there is a company from Minnesota that makes nothing but these types of trailers. Protainer out of Alexandria. MN. We have some of the best trailer makers in the country. You would have saved yourself lots of fuel. The plus side with Protainer is that they're containers can be used on any standard roll off truck as well. If I'm not mistaken, they're the only company that uses standardized boxes. You could use the same box on a trailer that you put on the truck and then you could also buy it containers from other manufacturers as long as they were a standard rail box. Plus if you want more cans/containers you just have to drive to Alexandria which I'm sure no matter where you live in Minnesota is closer to you than Texas.
I'm glad you did this video on this setup. I'm down in Florida and have a local company that builds these. They have the flat deck. I'm doing the two dumpsters and flat deck. But i have upgrades i want added to these to make things more efficient. One being the automatic tarp system like on the big trucks.
Having worked on rolloff trash trucks for 2+ years my recommendation would be have a 2nd winch installed and wired in for redundancy as when a can is overloaded winch cables break and its no fun when a winch cable breaks and takes out a glass window or even hits the operator not to mention the can sliding back off the trailer and you being stuck with a broken trailer needing to pickup a box that's full. personally id get a hooklift trailer that uses a hydraulic arm to lift cans on and off they make trailers and beds for trucks and there is way less to break on one of those than a flying winch cable
Thanks for the great content Stanley. Could you also tell us maintenance and costs and common issues. I wouldn't want to order to the other side of the world to have issues that can only be solved in the US.
Weight capacity is the limiting factor for most. 2-3tons just isn’t enough. For example, went to the quarry today. Asked for 3 tons of aggregate and they loaded me with 3.18 tons. I would be overloaded with a hair over 4tons with the 14k version. This seems like a dream setup for those who deal with remodel or people getting rid of junk TBH. Nonetheless, looking forward to how it treats you and hopefully it changes my mind from my initial impression. Thanks again for the vid Stan!
Nice package.. Flat deck option is a Great one provided it also has ramps so that you can flat load equipment on it then pull it up. Also for flat deck application it the winch were mounted higher it could serve double duty by being able to pull loads onto the "flat deck"
Love the content brother, it’s been rough since my grandpa’s garage caught fire and I lost all of my tools, welder, power tools, air compressor, kinda sucks gotta start over unfortunately😏
Cmon Stan, you KNOW that you need to speed load a Skidsteer into the can in order to fully show the capabilities of this setup! The only thing that I had a question about was the security of the single D ring for the tailgates when dumping. I have 20 years in the waste industry and doors swing free when dumping with the conventional chains. Great vid and great product!
The only thing that I had a question about was the security of the single D ring for the tailgates when dumping.- good call. I wonder how that will hold up. Guess I will find out
@@Dirtmonkey I dumped rolloff cans from 15yds to 40yd self contained. When you get a “stuck” load and have to run a verticals can back and forth and even use the cable to tap it on the transfer station floor, the first thing that comes loose is the door securement. You have a quality channel sir!
i’ve wanted one of these for a few years now since first seeing them, but my biggest concern is all the negative i’ve seen/heard about the lifting power when dumping. i had some texas built dump trailer 10 years ago that could barely lift C&D let alone dirt so hot rod of it within a year or two, since then i have multiple brimar dump trailers and they never let me down. and obviously a box with 4 foot walls you can’t load the entire thing with dirt you’d be way over weight (i know that part) but i’ve seen a lot of guys on youtube that put only a couple yard of dirt and can’t get these to lift yet i’ve lifted 6 tones of cement in my brimar dump trailer. but i’ve also seen these dumpster trailers with small honda motors that run the hydraulic system. idk this comment was all over lol hope i works out well for you looking forward to future vids because i really do want to get some of these!
My neighbor has these and a few guy working for him. Different types of hitching and truck configurations gooseneck and ball hitch. He is making a killing and loves the system.
I'm not in this business, I'm not even a US resident, but I find this video really interesting. I wouldn't mind starting a dumpster business in the US, and I might even do so... you never know.
I run a Roll off dumpster trailer business in Wisconsin and we make great money. I have a ton of videos explaining the business on youtube. Would love to chat with you about it. Love the videos I have been watching for years!
It might be a little late but regarding the roll off box trailer can you do a comparison to the winch one versus the rieving one that uses the Honda motor it's a little more money but is it's worth it just starting out
Great concept but if I had to poke some holes in this i would say that the end of the rails near the ground are no where near ready for the abuse that constant dumpster loading will put them through. Also, 2 remotes is super annoying, they could have done a better job and consolidating that.
Great video as always Stan my biggest question is why would they have two controller and not intergrade them into one. I would imagine with one wireless controller that you can use with the winch and lift you can increase production time faster drops and pick ups. With the person safely in the truck. To me it seems kind of back yard made with out having something like one controller for all.
One controller would be great, but you probably need to watch the dumpster and be sure it stays on the track. Especially if the ground is uneven, as it usually is at job sites.
Honestly probably because it would be tied to the winch and trailer. If the winch goes out you would need to re do the controller anyway, and the same for the dump feature. It would also make it harder to upgrade. But with separate controllers you could put a Harbor freight winch on there if you wanted and it wouldn't affect the controls, Or you could upgrade the pump without worrying about compatibility.
This feels pretty nice. But it feels it would be better if it is a hook lift system instead of the wire and the body fram it’s under and have a hook that you in to from the car. Nice video
Lots of these trailers out now, Texas Pride has them, Maxx-D, PJ, ect.. Most affordable one is probably bison out of PA. Nedlands is good, protainer. All standard rail cable hoist setups. I prefer hooklift though.
Technically it being rated for 14k means that you’d need a class A or a class b since it’s goose neck in Illinois to use these just a heads up. Keep in mind class a & b are just as expensive now to get
Stan all fine if it fits your needs if you rent them cans will get destroyed and overloaded loaded wrong all weight back end of can would lift the back of your pickup off the ground and if you tow with a 4500 or 5500 series class of truck puts you into a class A CDL but hope it works well for you. I personally for that money spend a little more and get a under CDL single axle roll off truck.
There's quite a few lawn business, that has dumpsters added on to their businesses. So, he's got his company name on the side of his dumpsters!! My next door neighbor used a service, that had a regular truck, that picked up the dumpster.. I asked and he had told me, that it over $300 per 30 yard dumpster.
there is a company in my area called jtr they have been doing roll offs and portable tolets for years recently i wanna say 2 or 3 years ago they started doing roll off storage containers kind of. i got no clue though where they get there trailers from or anything i wanna say they make them but not to sure.
We have a roll off truck. 22 dodge ram 5500 SNG setup. Different rate structures. 1-3,4-7,8-14 days. We use it a lot on landscaping, material delivery, and rent our dumpsters out. We re in w a few contractors that do roofs, remodeling etc. different entity, lots of money to be made, we average $250-300 a dumpster
Any plans in the company to build future trailers with a reeving system instead of the winch? Deck lengths larger than 14'? Like 20' with shorter sides??
we manufacture these type of roll off trailers at PDQ in dunnellon FL in our area its mostly 350-500 a week drop plus fees for a 12 yard box its great for guys starting out a side hustle or small business owner who need the most versatile trailer
@@brianmixon4309 we had a 3rd part running the website which is now in our hands so should be updated pretty soon our TikTok had plenty of proof of what we do
Just curious why you didn’t buy a Diamond C? I thought they make the same thing. BTW… this is my dream but I can’t get anyone to rent my dump trailer as it is.
Is that ur rM there using. I thought u had the tool box system in it which would prevent use of a goose neck. And since when do u have a slip tank in the truck. Have I missed a video. Lol. I know. I'm nosy
😢 Buy it with the 8000 pound axles and have the title read 14,000 total GVW for the trailer and if you have an F350 that would have a GVw of around 11,000 pounds so you would be under the 26,000 and your rims and axle and tires would be up for heavy duty work especially when nobody’s looking And it will go over curbs fully loaded much much better
20 grand that's incredible my boss bought a 16 ft dump trailer I had him build every 3/4 L bracket slots using wood planks to separate material but with this you have three bins you can put the green waste and one the concrete and another glad he's coming up with a low boy cuz I was going to say if you filled that up with concrete you ain't going to dumping it you ain't going to picking it up people with a roll off business know there are people stupid enough to fill up something that high with concrete and any material that you get where you can take one of them to the landfill one to the concrete quarry and one to the metal recycling yard I like what James Flori had to say a enclosed roll off so you can store your equipment in and with a security system
Some good comments being made in the comments, but they're still limiting their thinking - with a "flat deck" one can effectively palletise* other plant as well.
Think large welders, large emergency pumps, emergency generators, etc, that are too small, and or light, for a "J" or shipping container platform to be required or cost effective. Hire companies and government/state/municipal/utility companies may be a natural market for these.
*As a kid I was enamoured with the whole Thunderbird 2 concept - use a standardised container and you can use the same machine to move everything. I still try and apply it to plant in general, when allowed.
Thats brilliant. I didn't of it that way. Im pinning your comment if thats ok.
@@Dirtmonkey
No worries - pass it on to the trailer builders, too, if you think they may be interested 👍😎
They need to add conex boxes to there system
@@Dirtmonkey A concept that has ran thru my mind about this style trailer is to have a half flat deck and half enclosed setup. That was you could use the back half that is flat to load or transport material to the jobsite or as stated put a large pump or welder on and use the front enclosed area as a mobile job box to store and secure tools this could even be fitted with a fuel tank to allow on site fuel, tool, and storage.
Any more feedback to share on the DuraHaul after a year? I noticed they're no longer a dealer.
It would be nice to see if the company can build you a sealed, lockable Job Box roll-off. When doing a job like a retaining wall, you can deliver the box to the site first with all the necessary hand tools, power tools, basic supplies, and the small plate compactores. Everything you need at once and a secure place to store the equipment at night. At the end of a job, pick it up and move it to the next.
that's would be handy.
More excellent idea!!!
C can
now that's good.
Yeah that would be a great idea!
I'm third generation in the solid waste industry aka garbage man...lol.
In 1960 my twin uncles had built the very first Roll Off truck.
They called it a Drop Box truck with 20 yard boxes.
My uncles worked for their mother, my grandmother who owned the
the first garbage company in town. She only invested in the build
of the truck and didn't patent the Drop Box idea back then.
!!!CAUTION STANLEY!!!
I drove a Roll Off back in the 80's for 11 years and the one thing you
had to watch out for was boxes loaded to one side with dirt or
concrete, they flip over on there side when loading on the truck.
I would pound the sides of the box and if it sounded hard it was
loaded heavy to one side and you couldn't see it for each load was
full of other debris and tarped. Even at that. be careful on turns, they
will roll over easy if loaded heavy on one side. I could show you all
kinds of tricks we used to do loading/off loading in difficult areas.
But I live in California 🤐don't tell anyone!
Absolutely PHENOMENAL!! I was just talking to my dad about starting one of these around here in Southern KY.. Thanks @Stan!!
Stan, you always ask the right questions and give us (the viewers) the information we need to be successful. Thank you!
My experience has been on the consumer end of the business, getting a dumpster for remodeling jobs. My projects are usually on the smaller side so I can often handle things with my single axle dump trailer. The last time I had to price dumpsters I called three ‘different’ carting companies and the same person answered the phone each time. All three were owned by the same parent company.
Usually here in Connecticut you get a price for a certain volume, say 12 cu. yds, a week to fill it and a weight limit, say two tons. If you keep it for a longer period of time they add on a certain amount per day. If the can is over weight when they dump it they will bill you, as in charge your credit card, for the overage.
good info- Thank you.
If they welded big D-rings in the corners and the middle low to the base you could transport equipment as well…. With the weight limit in mind.
Most companies sell flat beds that can be rolled on.
I'd love to see a full in detail video of this trailer. Of you using it. Setting it up. And ideas u have for it. As a yard maintenance man myself I'd modify one bin to turn it into a grab and go leaf connection system. I.e. I can drop it on a site for some of the guys to use and go back later to get it.
I have actually thought of something similar to this after looking at used military roll off trailers but they use a crane. You can have a flat bed that you strap equipment to and deliver to the next job site and then a dumpster like that one that you set some where else. And then even use another flat pallet and built an office trailer on it and put that somewhere else.
I was actually looking into doing this about 7 years ago there’s another company building these for a while now I believe it was a southland trailer and you can get them in tri axle goose neck and up to 25 or 30 yard bins and you can get a heavier gavel box and a flat deck with d rings as well
Look at Lamar trailer.
Great video. I saw one of those trailers at a Dealer in Bedford, Pa this week
Good looking rig. I could see having a deck so you can haul like a typical trailer. (Duel purpose). Might be able to deliver those small sheds too.
Given its trailer based I get the tarp mounted to the container, but that is definitely a vulnerable to damage when loading with a mini X or skid! I recently packed a truck camper in an open top using a mini X with a thumb had junk everywhere on all sides ha. Great video I love your editing
I use a setup like that in my land scaping business but mine is a Maxx D. I love it, makes life so much easier.
Im pumped to give this a try in my company
Great video, there is a company from Minnesota that makes nothing but these types of trailers. Protainer out of Alexandria. MN.
We have some of the best trailer makers in the country. You would have saved yourself lots of fuel.
The plus side with Protainer is that they're containers can be used on any standard roll off truck as well. If I'm not mistaken, they're the only company that uses standardized boxes. You could use the same box on a trailer that you put on the truck and then you could also buy it containers from other manufacturers as long as they were a standard rail box.
Plus if you want more cans/containers you just have to drive to Alexandria which I'm sure no matter where you live in Minnesota is closer to you than Texas.
im a sucker for a cool trailer! and THIS is a COOL trailer! Hope you have a good weekend!
I can't wait to see how many ways Stan and team find to use this cool new setup!
That looks awesome! Thinking about adding this service to my business. Thanks for the info!
I’ve started looking into this as a possible side job. Thanks for sharing, and I look forward to more videos about these.
That was my thought as well. Keep the guys going as a side hustle
@@Dirtmonkey But if you are idle because of snow, won't the other guys be idle too?
I'm glad you did this video on this setup. I'm down in Florida and have a local company that builds these. They have the flat deck. I'm doing the two dumpsters and flat deck. But i have upgrades i want added to these to make things more efficient. One being the automatic tarp system like on the big trucks.
What is the name of the company, if you dont mind me asking. Im In Sarasota and looking for something similar to what you described.
@@suncoastprecisionservices U-Dump trailers out of Ocala.
THANK YOU SO MUCH FOR A GREAT VIDEO AND EXPLANATION OF THE BUSINESS!!
you earned a subscriber Mr, a lot of good info for contractors
Having worked on rolloff trash trucks for 2+ years my recommendation would be have a 2nd winch installed and wired in for redundancy as when a can is overloaded winch cables break and its no fun when a winch cable breaks and takes out a glass window or even hits the operator not to mention the can sliding back off the trailer and you being stuck with a broken trailer needing to pickup a box that's full. personally id get a hooklift trailer that uses a hydraulic arm to lift cans on and off they make trailers and beds for trucks and there is way less to break on one of those than a flying winch cable
I never though of it like that. I wonder if someone makes a hook lift trailer for a pickup?
Thanks for the great content Stanley. Could you also tell us maintenance and costs and common issues. I wouldn't want to order to the other side of the world to have issues that can only be solved in the US.
Hey Stan, great trailer, Have you thought about putting a heating element on the sides, great snow removal for job sites
I plan on using it for snow hauling but not heating it
They should have put a D-ring on the trailer frame to hook the cable to when running empty.
God bless you, Sir!
Gbu brother! Great video!!
These work great issues that limit you from growth is non standard rails, tarp for each dumpster and the 7k axles, take a look at bison trailers
great piece of equipment great video
Weight capacity is the limiting factor for most. 2-3tons just isn’t enough. For example, went to the quarry today. Asked for 3 tons of aggregate and they loaded me with 3.18 tons. I would be overloaded with a hair over 4tons with the 14k version.
This seems like a dream setup for those who deal with remodel or people getting rid of junk TBH. Nonetheless, looking forward to how it treats you and hopefully it changes my mind from my initial impression. Thanks again for the vid Stan!
They say it can handle 4 tons, but tell customers to stay at 2 tons cause customers don't know how to count.
@@d3lsl0w in other words, it’s not built to handle consistently heavy loads.
That’s why if you have a customer loading dirt or gravel, concrete you give them a container with 2’ high walls
Nice package.. Flat deck option is a Great one provided it also has ramps so that you can flat load equipment on it then pull it up. Also for flat deck application it the winch were mounted higher it could serve double duty by being able to pull loads onto the "flat deck"
Love the content brother, it’s been rough since my grandpa’s garage caught fire and I lost all of my tools, welder, power tools, air compressor, kinda sucks gotta start over unfortunately😏
Praying for you Brother
I wonder how many bins on and off the batteries are good for.
Nice design access for the spare.
Love the doors!!!!
I love your videos and I enjoyed everything you do Keep up the good work buddy. 😁😎😎😎💪💪👍👍👍🙏🏻🙏🏻
Cmon Stan, you KNOW that you need to speed load a Skidsteer into the can in order to fully show the capabilities of this setup! The only thing that I had a question about was the security of the single D ring for the tailgates when dumping. I have 20 years in the waste industry and doors swing free when dumping with the conventional chains. Great vid and great product!
The only thing that I had a question about was the security of the single D ring for the tailgates when dumping.- good call. I wonder how that will hold up. Guess I will find out
@@Dirtmonkey I dumped rolloff cans from 15yds to 40yd self contained. When you get a “stuck” load and have to run a verticals can back and forth and even use the cable to tap it on the transfer station floor, the first thing that comes loose is the door securement. You have a quality channel sir!
Very cool, I want one or three!
Love the videos
i’ve wanted one of these for a few years now since first seeing them, but my biggest concern is all the negative i’ve seen/heard about the lifting power when dumping. i had some texas built dump trailer 10 years ago that could barely lift C&D let alone dirt so hot rod of it within a year or two, since then i have multiple brimar dump trailers and they never let me down. and obviously a box with 4 foot walls you can’t load the entire thing with dirt you’d be way over weight (i know that part) but i’ve seen a lot of guys on youtube that put only a couple yard of dirt and can’t get these to lift yet i’ve lifted 6 tones of cement in my brimar dump trailer. but i’ve also seen these dumpster trailers with small honda motors that run the hydraulic system. idk this comment was all over lol hope i works out well for you looking forward to future vids because i really do want to get some of these!
I hear ya- Your curious if it will handle a load. I will find out for you.👊👍😎
That's a good point. They look good in the dealer's yard, but I've seen people at the dump using ratchet car jacks to get their can up.
Thats a very nice set up. What about ramps for like a skid steer, or would even need any. you could haul it in it, and multi task .
Only thing missing would be to enclose a box. Great product, thanks Stan.
My neighbor has these and a few guy working for him. Different types of hitching and truck configurations gooseneck and ball hitch. He is making a killing and loves the system.
They have bumper pull options or just neck trailers?
Nice i wonder if you can get totally enclosed boxes weather tight for that or just the open top
Okay, I need this but small, deck-over, and bumper pull. They need to make a 4½x7' deckover version for cars.
It would be nice to have a dual speed winch for rolling g off and for light pick ups
I'm not in this business, I'm not even a US resident, but I find this video really interesting. I wouldn't mind starting a dumpster business in the US, and I might even do so... you never know.
I want one of those D&D hats!
what size are the rails on the can? standard or custom?
how do the batteries do in northern Minnesota when it's minus 20f?
I run a Roll off dumpster trailer business in Wisconsin and we make great money. I have a ton of videos explaining the business on youtube. Would love to chat with you about it. Love the videos I have been watching for years!
Went to your channel and immediately saw "My Dumpster Business Put Me in Prison". Sounds like fun.
Lol😂
It might be a little late but regarding the roll off box trailer can you do a comparison to the winch one versus the rieving one that uses the Honda motor it's a little more money but is it's worth it just starting out
Great concept but if I had to poke some holes in this i would say that the end of the rails near the ground are no where near ready for the abuse that constant dumpster loading will put them through. Also, 2 remotes is super annoying, they could have done a better job and consolidating that.
Time to expand now. Stan.
Does he make a hook style. We have a 54" palfinger hook on our single axle Kenworth. Way nicer cause don't need to hook up a cable
Nice one Stan 👍👍🏴🏴
Those engines are built to be quite but if you swap out the injectors to single shot there louder but you get better mpg.
Really like the trailer🤘🏼🇺🇸
Game changer and other companies "why can't we build that? " awesome video 📹.
Would this gooseneck trailer work on a 8 inch lifted f250? Or do they offer a raised goosekneck option?
Great video as always Stan my biggest question is why would they have two controller and not intergrade them into one. I would imagine with one wireless controller that you can use with the winch and lift you can increase production time faster drops and pick ups. With the person safely in the truck. To me it seems kind of back yard made with out having something like one controller for all.
One controller would be great, but you probably need to watch the dumpster and be sure it stays on the track. Especially if the ground is uneven, as it usually is at job sites.
Honestly probably because it would be tied to the winch and trailer. If the winch goes out you would need to re do the controller anyway, and the same for the dump feature. It would also make it harder to upgrade. But with separate controllers you could put a Harbor freight winch on there if you wanted and it wouldn't affect the controls, Or you could upgrade the pump without worrying about compatibility.
This feels pretty nice. But it feels it would be better if it is a hook lift system instead of the wire and the body fram it’s under and have a hook that you in to from the car. Nice video
I have a hook lift version
Does is it need to be a 8ft bed truck? Do you make a 16-18ft flat bed attachment to haul cars/bobcats?
Lots of these trailers out now, Texas Pride has them, Maxx-D, PJ, ect.. Most affordable one is probably bison out of PA. Nedlands is good, protainer. All standard rail cable hoist setups. I prefer hooklift though.
They seem to be getting more popular.
@@Dirtmonkey yea, huge influx in the last 3 years.
Hi I wanted to know how I can get started with making a contract agreement for the customer and what to add to the list.
I’d like to see it loaded with materials from a site. The operation when its somewhat overloaded. Cause you know that’s the norm.
I agree. This looks a little light duty for some of the loads I haul. Sheetrock and asphalt roofing shingles is heavy.
Technically it being rated for 14k means that you’d need a class A or a class b since it’s goose neck in Illinois to use these just a heads up. Keep in mind class a & b are just as expensive now to get
That’s what happens when you live in a communist state.
now having one of these units, is it less susceptible to thefts than the traditional dumpster trailer on wheels?
That's awesome 👌
Are they going to make anything longer than the one they are showing and a gvw higher than 16k?
Dude where did you pick this up? I'm in Texas and it says their location is temporarily closed.
Stan all fine if it fits your needs if you rent them cans will get destroyed and overloaded loaded wrong all weight back end of can would lift the back of your pickup off the ground and if you tow with a 4500 or 5500 series class of truck puts you into a class A CDL but hope it works well for you. I personally for that money spend a little more and get a under CDL single axle roll off truck.
There's quite a few lawn business, that has dumpsters added on to their businesses. So, he's got his company name on the side of his dumpsters!! My next door neighbor used a service, that had a regular truck, that picked up the dumpster.. I asked and he had told me, that it over $300 per 30 yard dumpster.
It might make a nice side hustle
there is a company in my area called jtr they have been doing roll offs and portable tolets for years recently i wanna say 2 or 3 years ago they started doing roll off storage containers kind of. i got no clue though where they get there trailers from or anything i wanna say they make them but not to sure.
Your #1 of the main reasons why I started my TH-cam channel sir 🚧🚜
We have a roll off truck. 22 dodge ram 5500 SNG setup. Different rate structures. 1-3,4-7,8-14 days. We use it a lot on landscaping, material delivery, and rent our dumpsters out. We re in w a few contractors that do roofs, remodeling etc. different entity, lots of money to be made, we average $250-300 a dumpster
For how long of a rental?
Interstate 35 has a toll booth before Industrial blvd now? It’s been years since I’ve been up there. Lol.
Good ole Seguin Tx
Cool mechanism for the hitch, but you still have to get up there and hook up the safety chains.
true.
@@Dirtmonkey people will forget to hook up the chains. If that was my trailer, I would disable the remote lock.
Any plans in the company to build future trailers with a reeving system instead of the winch? Deck lengths larger than 14'? Like 20' with shorter sides??
Texas pride has one.
What size ball does that gooseneck trailer need?
I have such an trailer for years
I am Green to roll off services.. is there a way to lock the box after dropping it off?? I'd hate to keep reinvesting into a new box.
Between the trade shows and the series on dump trailers, you sure are costing me a bunch of money. 😂
How useful is it to you with a 2t capacity? I would think most of the stuff you do would be heavier
I think way to light duty.
Could be a game changer.
Those are some slick "mall" jeans trailer dude.
we manufacture these type of roll off trailers at PDQ in dunnellon FL in our area its mostly 350-500 a week drop plus fees for a 12 yard box its great for guys starting out a side hustle or small business owner who need the most versatile trailer
No you don't according to your website
@@brianmixon4309 we had a 3rd part running the website which is now in our hands so should be updated pretty soon our TikTok had plenty of proof of what we do
I use a Texas pride and i pull it with a 6.8 excursion
Just curious why you didn’t buy a Diamond C? I thought they make the same thing. BTW… this is my dream but I can’t get anyone to rent my dump trailer as it is.
Is that ur rM there using. I thought u had the tool box system in it which would prevent use of a goose neck. And since when do u have a slip tank in the truck.
Have I missed a video. Lol. I know. I'm nosy
If it can pull with winch and dump 5 to 10 tons its good. But many are limited to 1 to 4 tons. How many tons can this hamdle?
Hope your court thing is going well !
😢 Buy it with the 8000 pound axles and have the title read 14,000 total GVW for the trailer and if you have an F350 that would have a GVw of around 11,000 pounds so you would be under the 26,000 and your rims and axle and tires would be up for heavy duty work especially when nobody’s looking And it will go over curbs fully loaded much much better
haha, I thought I recognized KC in the video. If I had known you would be rolling through I would have at least got ya a snack for the road trip.
The other thing u could do is tie down a can on your Flatt deck if u need the Flatt deck next in your jobs for the day ..
20 grand that's incredible my boss bought a 16 ft dump trailer I had him build every 3/4 L bracket slots using wood planks to separate material but with this you have three bins you can put the green waste and one the concrete and another glad he's coming up with a low boy cuz I was going to say if you filled that up with concrete you ain't going to dumping it you ain't going to picking it up people with a roll off business know there are people stupid enough to fill up something that high with concrete and any material that you get where you can take one of them to the landfill one to the concrete quarry and one to the metal recycling yard I like what James Flori had to say a enclosed roll off so you can store your equipment in and with a security system
Can you use it for dump trucking jobs