Next Level Racing Motion Plus Platform Install in DIY Sim Racing Rig With Integrated Monitor Mount
ฝัง
- เผยแพร่เมื่อ 13 ก.ค. 2024
- NLR Motion Plus Platform installed in my DIY sim racing rig paired with V3 seat mover. Upgraded also to Sim-Lab integrated monitor mount. Threw in a Philips HUE Play set for good measure.
Installation is complicated without help, but doable with my trusty low profile car jack.
Full build log is here:
Follow for more:
www.diy-sim.com
/ diysimofficial
/ diysimofficial
/ discord
If you like my work you can always buy me a beer here: www.paypal.com/paypalme/Stuyo...
www.racedepartment.com/thread...
-----------------------------
Persuasion (Instrumental) by RYYZN / ryyzn
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/-persuasion
Music promoted by Audio Library • Persuasion (Instrument...
------------------------------
Just Cool by WowaMusik / unminus
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/just-cool
Music promoted by Audio Library • Just Cool - Unminus (N...
------------------------------
Timestamps:
00:00 - Intro
00:53 - Unboxing
01:56 - Assembly
04:35 - Powerup Cycle and Travel Test
04:45 - Sway Bar Install
07:28 - Test Fitting
08:58 - Main Unit Install
12:05 - Showcase
13:10 - Assetto Corsa Testing
14:25 - WRC10 and Sim-Lab Integrated Mount
14:45 - Dirt Rally 2.0
15:50 - Philips HUE Play Lights Demo - เกม
Dope setup my friend 💯💯✅
Dream simrig u have gratz 👍
Awesome project! Do you think the NLR motion plus fit on a trak racer TR160?
Very nice - What is the internal dimension of your rig side to side, it looks 550mm - where the Motion plus sits
Amazing rig, but you really need to work on that FOV as it's WAY too wide and distorting the image giving extremely unrealistic perception of distance.
What kind of amp do you use to connect all of your transducers? Do you use a regular multi-channel amp with LPF’s? Most bass amps I come across are either 2 channel or don’t say anything at all, I wonder how I can get atleast 4 channels to work on a single amp to mimic the 4 corners of a car
car jack on a racing rig lmao love it
Have the NLRv3 also. You're using this and the seat mover? Cheers.
Looks amazing! What monitor are you using?
G9 Samsung
Hi I have the seat one is it Worth the money getting that one on top of the seat one??? Is the new one good???
How do you like it with both the V3 and the Motion Plus? Is it too much? I have the V3 and am debating my next steps.
They compliment each other very well. Motion plus has very fast acceleration but single install lacks pitch effects, V3 delivers nicely pitch and surge, they work pretty consistently together. Motion Plus is great at delivering vibrations in the front as well, almost rendering mu front Auras unneeded. On the back it was somewhat “boring” when shakers are off, but turn them on they compliment the motion plus very well so it became pretty consistent. Motion plus has about 3.5cm travel which is near a dbox system, but it has ridiculous acceleration and narrow “wheelbase”, which delivers big and fast roll angle. Also engine and suspension vibrations feel great - it is truly and amazing compact piece of kit. In my opinion is truly worth it in single platform
Install and it is actually meant to work together with the rest of NLR ecosystem, at minimum the V3.
@@57uyo great to hear and thx dor your video! i also have the v3 and installed today two of those beasts. did you ever played formula1? i ask me if the v3 lifts the seat too much up from the ground. what do you think? i will try it tomorrow for myself the first tlme. i am really excited
@@57uyo and do you play vr too? i only bought ot for vr
@@affenpresser I reworked my whole rig, put the pedals much upper now. Have everything correctly according Ricmotech’s guide, feels very spot on. I play very little formula, feels kinda weird but don’t mind, also i am with inverted pedals. Either way main focus for me is rallying so I am pretty happy how it is at the moment. I play rarely VR, now monitor is very near to wheel and feels great, quest 2 just is too ugly graphics so i prefer monitor. Ultimately I plan to add second motion as well, but even with one is great!
@@57uyo nice! thx for your fast answer☺️
noice build mate... when mounting 2x40mm profiles on the side brackets of the unit (like you did) is it flush with the top of the motionplus? thx in advance
Thanks! No, regrettably it is not. Do not remember how much was sticking, on top of my had on the high setting it was about 10mm - remember it was just enough to make sliding in much more complicated. Since then i reworked the whole rig to 48cm spacing so both platforms drop in directly and make the rig lower. Also raised significantly the pedal plate to fit everything.
damn :(
do you know wich measurement you would need to have from groove to groove on the rig to mount the motionplus directly on it? or for example wich distance the original nlr gt elite or fgt elite rig has from groove to groove...
@@devrox yes, you need 48cm spacing BETWEEN the side profiles. The original kit is actually 48.4cm, I bought it because of the foot NRL plate but it is very easy to rework your cockpit with only some additional profiles. I also had to order new shorter profiles for my side mounted wheelbase. Here is info on the NRL mounting kit: www.force2motion.de/en/next-level-racing-elite-motion-adaptor-upgrade-kit.html
you are such an helpfull guy... i appreciate this so much... thx mate
Hello! So i bought two unit and installed them really precise, but i am experiencing weird things. My right front foot is lifting up instead of the simrig going down. can you maybe tell me how you adjust the software? what actually type or did you do before racing? it is an odd issue. thank you for your help!
You still have 2 NLR Motion Plus installed? How you liking them?
@@charlielima Sorry did't see the email. I like it a lot it adds so much immersion😍
you ever experienced the heat protection to cut out or shut down the nlr motion plus movement?
Yes I actually have - how it is setup in this video the fan ducts are blocked half way. I left more space than NRL pictures in manual suggested because I was worried for cooling but yet again it overheated on a 1:30 hour session. I wrote them - no response. Since then i reduced sizing of rig so now it mounts directly on side rails. Made sure no blocks front and back. Never again had overheating.
@@57uyo how heavy is your rig? and what inner space do you have now for mounting directly?
@@devrox have no idea - everything is DIY so hard to tell weight. On the other hand with the integrated monitor mount it is definitely heavy on the front but motion plus still manages to be very snappy. Lost a little if the tactile feel for engine vibration in Dirt Rally 2.0, but having tons of bass shakers this does not bother me. Either way I turned down the motion a lot as it still can jump around. Inner spacing now corresponds to the original kit - 48.4cm, moving forward to 48cm flat where the pedal plate is. So what you need is to calculate everything with 48cm spacing basically.
HEY HOW MUCH DID THE RIG COST YOU AND WILL YOU BUILD ONE IF SOMEONE REQUEST A RIG
have a v3, what do you think if i just switch to motion plus and sell away the v3?
It was discussed in the previous comments already. Personally I really like how they work together and would not sell at this point the V3.
How much total motion cost?
Mini-Z in the opening?
Nope, Dr!ft, mini-z is quite bigger, had before 🤪: www.sturmkind-shop.com/en/
LOL 0:25 through 0:30 the view is opposite of motion.
Yep, this is what you get with the default AC profile 🤪 it was impossible even to hold onto the wheel
You mount the front piece to the wrong side should be front. The front should be back.