Any idea if the PCCM plus will do a "vehicle handover"? When you do a battery disconnect on the 997.1, you can lose the seat heaters and the Homelink. I'm told the only way to get them back is to crawl to the dealer and have it reset with the PIIWIS. Thank you, -Tom.
Interesting stuff! Im guessing with the saturation settings you could set it to monochrome (for more classic car vibe) - is there anyway to set the screen hue to orange to match the 996 dash?
Did you or anyone else find any more detail about the Radio area setting ( in Factory_Msg)? Im using a USA sourced PCCM that requires the Europe setting. Easy to change but radio frequencies are still set to US standard ( eg 95.3 instead of the required 95.4 ). Cannot seem to find anyway to save the new setting.
Interesting question which I too was wondering about since considering buying the cheaper US version. I had hoped that just changing location to Europe in the subsettings and swapping to DAB would do the trick but that is maybe not the case based on your experience? Would you share your process so far?
@@olafkon have done exactly that, but tried various ways of trying to save setting. Backing out through the menu. Powering off. Waiting to power on again.. all same result.. setting not changed.
Hello, boss. I am a Chinese manufacturing company. Source factory. I watched your videos and found out that you are an expert at reinventing android players. I have a team working on all Audi cars, all Porsche cars. Land Rover Jaguar is all about the development and sales of android screens, so can we have more in-depth communication and cooperation, price and service advantage!! Look forward to cooperating with you
there is a setting inSound/Volume where you can adjust the volume of the tuner, bluetooth and USB up and down. It works for the tuner but I notice no difference with the bluetooth and usb@@David-hn5ix
Thanks. Press and hold “Configure PCCM Plus” for 10 seconds to enter diagnostic mode. Came in handy when troubleshooting during installation.
Any idea if the PCCM plus will do a "vehicle handover"? When you do a battery disconnect on the 997.1, you can lose the seat heaters and the Homelink. I'm told the only way to get them back is to crawl to the dealer and have it reset with the PIIWIS. Thank you, -Tom.
Any chance you can shake the camera more and get it even more out of focus?
For me it would be interesting what functions stays behind the „Car Setting“. Did someone knows it?
hello, I just installed the back up camera, camera has been detected but when I backup camera doesn't turn on, any idea?? thank you
Interesting stuff! Im guessing with the saturation settings you could set it to monochrome (for more classic car vibe) - is there anyway to set the screen hue to orange to match the 996 dash?
Did you or anyone else find any more detail about the Radio area setting ( in Factory_Msg)? Im using a USA sourced PCCM that requires the Europe setting. Easy to change but radio frequencies are still set to US standard ( eg 95.3 instead of the required 95.4 ). Cannot seem to find anyway to save the new setting.
Interesting question which I too was wondering about since considering buying the cheaper US version. I had hoped that just changing location to Europe in the subsettings and swapping to DAB would do the trick but that is maybe not the case based on your experience? Would you share your process so far?
@@olafkon have done exactly that, but tried various ways of trying to save setting. Backing out through the menu. Powering off. Waiting to power on again.. all same result.. setting not changed.
Are you recording with an early 2000s flip phone?
I pressed the "Format the EMMC" Button. Now the PCCM+ starts every time with the tuner mode, not with the homescreen. Can I undo this?
Hello, boss. I am a Chinese manufacturing company. Source factory. I watched your videos and found out that you are an expert at reinventing android players. I have a team working on all Audi cars, all Porsche cars. Land Rover Jaguar is all about the development and sales of android screens, so can we have more in-depth communication and cooperation, price and service advantage!!
Look forward to cooperating with you
Wondering if there is any way to increase volume/gain for bluetooth/USB in these dev settings... my iphone is rather quiet at Volume 30.
Maybe a setting on the phone? Can you turn absolute volume control off?
I have the same exact issue. Did you find a fix?
@@David-hn5ix car-system- configure pccm+ - put in reverse and you should be sorted. I had the exact same issue and now it’s really loud
@Lee Shepherd yes I have done that. Tuner is very loud. Bluetooth and carplay are not loud enough
there is a setting inSound/Volume where you can adjust the volume of the tuner, bluetooth and USB up and down. It works for the tuner but I notice no difference with the bluetooth and usb@@David-hn5ix
Cool
Hi does this PCCM have apple car play / android auto?
Yes it does 😁
Did you tried to contact a reverse camera?
I did not. Not positive there is actually a spot to plug in a rear camera.
@@autotrap2370 O... so d do you meant there is no spot to plug the camera or it is not working if you plug it in?
@@autotrap2370 Do you mean there is is no spot to connect the camera or it is not working if you connect it?
How can I contact you?
Does the unit have HD Radio?
Does not seem to have HD radio.
@@autotrap2370 but this unit does have AM/FM right? The European version has DAB I believe.
@@imp450 correct has AM and FM. Connect to the existing harness for AM and FM antennas.
That's aftermarket chinese crap
*Promo SM*