Wow, after spending almost $1000 at a shop, and the guy said it was fixed, only to come home and had the same problem. Found this Video after days of searching, i know this guy saved me thousands of dollars more.
i just picked up a 2008 with a no start condition it had a new battery, starter and who knows what else a rear shock had rotted off so i pulled the bed to repair and check wires at the same time all good then i came across this video and low and behold with the module unplugged it starts and everything works again love it!
My trucks been at dealer since may 2nd 2023 they can't figure it out taking it back tomorrow I'm gonna check this I don't honestly know if my truck has on star but they've done everything under the sun to try to fix it I did too for months I really hope this is it
My 2008 Silverado had a similar problem but the 5v constant from the mass airflow was only getting 0.3 on my power probe so I probably the back of the fuse panel and followed the wire getting 0.3 and there was a break in it where it went in to the harness fix that all my relays clicked and truck has work ever since
Thank you for the video, But could you take a little bit if your time and explain to me how did you figure it out, What did you do to lead you to the problem That’s my point please Thank you
Mine does have the line under. I changed the started just to find out it was good 🙄, before my Denali decided to go on strike it showed me check engine light, and when I turn the key it’s still showing. My next guess would be ignition coils since everything else has check good… huh! Longest week of my life!
Wow I will tried This..2 days ago My 2007 gmc yukon won't Crank up,I scan the vehicle and came out with Code P1516..Not sure where to begin with My issue..Please any Comments Will be appreciate Thanks..Also Sr.Thank you for your video.
I’ll be damn brother..... I have the same damn truck with same issue... I been wanting to disco the damn ostar just on gp, well that and because money’s getting tight....
yeah sorry havent even noticed anyone comment and yeah was a pain for the whole damn weekend. I still have that onstar unplugged just put black tape over all the lights on the dash so i dont see them glow lol does the trick. I did have almost the same issue expect it was cranking over just wasnt starting almost replaced the fuel pump but figure it was the ground on the frame that rusted and when it got cold wouldnt make the connection. cleaned the ground up and fired up again. I grew up with Chevy dad was always tinking with his. But he passed just before this and never got the chance to ask him. Then again he never owned on with a Onstar before. but taught me well to track the problem
Good tips on how solve cost ly repairs. 96buicklesabre no clicknostart after my alternator wire was held to start terminal on battery threw security light on flashing no click no crank
Wow, after spending almost $1000 at a shop, and the guy said it was fixed, only to come home and had the same problem. Found this Video after days of searching, i know this guy saved me thousands of dollars more.
This guy is a lifesaver what a great video probably save me thousands being stuck at a parking lot
i just picked up a 2008 with a no start condition it had a new battery, starter and who knows what else a rear shock had rotted off so i pulled the bed to repair and check wires at the same time all good then i came across this video and low and behold with the module unplugged it starts and everything works again love it!
Crazy the littlest thing causes so much trouble
I have 2008 GMC, and the same thing happened. Thanks for the great advice. The truck is now running
Thank you! You were dead on with a friend's 2007 gmc sierra. OnStar! The module was upside down , but I pulled the same one. I'm a big hero now . Lol
You are the man bro!! F onstar!! After new fusebox and days and days of troubleshooting. This solved my problem
I finally got mine figured out after a year!!!!!
Man you fixed my problem I been having for months thanks so much!!!!!!
Thank you so much! I was starting to go crazy trying to figure this out
No wayyyyy I've spent thousands and still have to do rhetorical old 30 turns till I get the right lights gonna try it now
Great!!! Was having the same issue with my 2011.
I just wanna say u saved me a lot of $$ from my truck not going to the shop , my 2012 Chevy 2500 diesel had the same issue ur truck did thank you
DUDE!!!! THANK YOU!!!!! YOU ARE THE MAN!!!!
thanks you soo much! your the freaking man! it took me 20 min! totally fixed it!
You just saved me so much money 🙏🏾🙏🏾🙏🏾🙏🏾
I could hug you right now
Thanks so much fixing my truck
Bro you are the shit thank you 🙏🏾
Fixed my truck but now most lights on dash are on any suggestions to get that fixed?
My trucks been at dealer since may 2nd 2023 they can't figure it out taking it back tomorrow I'm gonna check this I don't honestly know if my truck has on star but they've done everything under the sun to try to fix it I did too for months I really hope this is it
My 2008 Silverado had a similar problem but the 5v constant from the mass airflow was only getting 0.3 on my power probe so I probably the back of the fuse panel and followed the wire getting 0.3 and there was a break in it where it went in to the harness fix that all my relays clicked and truck has work ever since
Was your truck doing the no crank no start as well?
I wanna buy you a beer
Anytime Cheers!
Can it be left unplugged indefinitely
Thank you for the video,
But could you take a little bit if your time and explain to me how did you figure it out,
What did you do to lead you to the problem
That’s my point please
Thank you
What module is that?
So what do you do to fix the problem?
In The Thumbnail I Thought That Was The Screen On Fire. It’s actually just feathers lol
Mine does have the line under. I changed the started just to find out it was good 🙄, before my Denali decided to go on strike it showed me check engine light, and when I turn the key it’s still showing. My next guess would be ignition coils since everything else has check good… huh! Longest week of my life!
Old comment but I’m curious if you ever ended up finding out the issue?
Did you get a U101 code lost communication with pcm?
The line isn’t there for me either but my truck doesn’t have OnStar so now I have to keep digging for the problem
Same boat
Look for the module anyway. It may b there but not online
Did you get it yet?
@@chrisjent8480module is the problem I found out after year and 5000🤦🏽♂️
Was the check engine light staying on ?
Did you lose fuel pump communications as well?
Just curious if you have a bad battery in a gm truck ( 2011 2500hd 6.0 gas )can it cause electricals malfunctions
Have you fixed the problem? I unplugged it and all my lights on the dash are on Im trying to figure out how I can get all of that back to normal
Did you ever figure out the issue same thing happened with mine, it works now but most lights are on dash
Take a push button and two wires run a hot to starter a ground to the starter turn the key on push the button the truck will start
And what code did u get ?
yall think it will work for a 1500 im stressed out my truck been down for 2weeks 3mechanics haved look at it
Do you have 6l80 trans if so there is a safety neutral switch inside of there that might be yo problem had same issue
So you do we fix it just unplug it or buy a new one
If you ever want them to find your truck or send help buy a new one. But can always send smoke signals if you break down lol
Thanks video very helpful I got mine fixed
Wow I will tried This..2 days ago My 2007 gmc yukon won't Crank up,I scan the vehicle and came out with Code P1516..Not sure where to begin with My issue..Please any Comments Will be appreciate Thanks..Also Sr.Thank you for your video.
Did you find out what it was i have same issue same code
I’ll be damn brother.....
I have the same damn truck with same issue...
I been wanting to disco the damn ostar just on gp, well that and because money’s getting tight....
yeah sorry havent even noticed anyone comment and yeah was a pain for the whole damn weekend. I still have that onstar unplugged just put black tape over all the lights on the dash so i dont see them glow lol does the trick. I did have almost the same issue expect it was cranking over just wasnt starting almost replaced the fuel pump but figure it was the ground on the frame that rusted and when it got cold wouldnt make the connection. cleaned the ground up and fired up again. I grew up with Chevy dad was always tinking with his. But he passed just before this and never got the chance to ask him. Then again he never owned on with a Onstar before. but taught me well to track the problem
Man I'd sure love to holler at ya. Worst week ever for me to... think it's the first ti,e I. 44yrs I've ever just dog cussed God
Wow cool
Good good good tenks saving money 💰 $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
I had the longest time of my life watching this video. You are way too long winded. Good info tho ...
Good tips on how solve cost ly repairs. 96buicklesabre no clicknostart after my alternator wire was held to start terminal on battery threw security light on flashing no click no crank