Your knowledge is incredibly valuable. You could make videos of you repairing whatever you’r repairing every day and I’m sure someone will find it useful. Thank you so much
Just finished my rebuild based on your video I cannot thank you enough recieved two of these pimps from a good freind and I managed to buy a genuine rebuild kit and follow your simple instructions thank you so much
Thank you for this video! It helped me change out my transducer today. I saw how you use the screwdriver to get the pump housing lowered, and your video was way more instructive than the manual!
for anyone doing this make sure the piston is in the down position before disassembly. Y ou can pull it down after you take the hex screws out but its tough
Great vid….except for the huge screwup at 8:05 where you skipped over the part where you put the PTFE o ring in the groove under the ball cage. I had to go watch some other guy’s vid to clarify.
BEST VIDEO ON 440 ON THE NET. Thanks for taking the time to share the information. Very useful for me. The tips of using the 3/8 for holding the piston is excellent! I was wondering, my 440 turns off after several seconds and the reset button on the machine pops. I think I might have an electrical or motor problems? Please advice!
Good video, like how the steps were broken down and limited use of electric tools for people without those tools. I would figure you would need to lube the piston before you insert it into the new packings.
both are good pumps, but Titan has better a warrantee, is a better value, has less ware parts for repairs, pusher valve for easy start-up (Titan exclusive) and longer history of making small pumps
All packing's, will wear out differently depending on what you are spraying, how you take care of them, (clear finish's vs heavy body, using piston lube vs not, running it dry-no liquid) I believe that the 440 packing will last as long or longer. In the 20 plus years I have been working with equipment this has been my experience. Hope that it will be yours.
Pressure will drop, hose can chatter (bounce or vibrate up and down), take longer to prime. in general if you are spraying okay in the morning and you come back after lunch and you need to turn up the pressure, this is a good indication that your packing are wearing out. also keep an eye out for paint that is coming out of the top of the packings, you can see this in the front or the back of the pump block. if you see this you should get your pump repacked soon.
@@00powerstrokin the filter has a spring insert in it, the housing has a place that is molded for the spring and filter to center and seal, this is were the filter and spring pushes up against, so the filter, spring and housing are all set in the proper place.
![โกหกเธอทั้งนั้น (Pinocchio) - SERIOUS BACON [Official MV]](http://i.ytimg.com/vi/P1HhTYwrR5A/mqdefault.jpg)
Your knowledge is incredibly valuable. You could make videos of you repairing whatever you’r repairing every day and I’m sure someone will find it useful. Thank you so much
Just finished my rebuild based on your video I cannot thank you enough recieved two of these pimps from a good freind and I managed to buy a genuine rebuild kit and follow your simple instructions thank you so much
Glad to know that I worked for you
Thank you for this video! It helped me change out my transducer today. I saw how you use the screwdriver to get the pump housing lowered, and your video was way more instructive than the manual!
It amazes me that this pump is so fraeking clean.
because it was brand new😎
Excelente video , thanks you for sharing your tips. It will help us so much.
Thank you for taking the time to showed how is Don. Really helped. Thank you!
Great step by step it's amazing that you don't have more likes 🙏👍 .
Wow you make it look berry easy
Thanks for this video you are the best 👍👍👍👍👍👍
Great video I’m doing mine after watching this video
A good video but I'd much rather speech than the music
for anyone doing this make sure the piston is in the down position before disassembly. Y ou can pull it down after you take the hex screws out but its tough
Great vid….except for the huge screwup at 8:05 where you skipped over the part where you put the PTFE o ring in the groove under the ball cage. I had to go watch some other guy’s vid to clarify.
BEST VIDEO ON 440 ON THE NET. Thanks for taking the time to share the information. Very useful for me. The tips of using the 3/8 for holding the piston is excellent! I was wondering, my 440 turns off after several seconds and the reset button on the machine pops. I think I might have an electrical or motor problems?
Please advice!
You make it look easy! I’d imagine a Graco is much more involved.
Thank you for the nice comment.
Good video, like how the steps were broken down and limited use of electric tools for people without those tools. I would figure you would need to lube the piston before you insert it into the new packings.
Good question.
awsome video thank you
Great video. Can you please send me a link for the packing kit that you used on that sprayer?
Great video, now my question is get an impact 440 or a graco 395 ultra?
both are good pumps, but Titan has better a warrantee, is a better value, has less ware parts for repairs, pusher valve for easy start-up (Titan exclusive) and longer history of making small pumps
Both are great, but Titan 440 is a better value, and much easier to repack the need arises.
Gracias. Full video
what ive learned is that I need to find someone who does for pay.
What material is the pump block of the machine made of? Aluminum? And if so, is it more resistant than stainless steel?
Yes the block is aluminum, Stainless steel is a very good material as well, but has a few draw backs. weight and cost.
how many gallons do those packaging need to be replaced? Do they last longer than the graco ones?
All packing's, will wear out differently depending on what you are spraying, how you take care of them, (clear finish's vs heavy body, using piston lube vs not, running it dry-no liquid)
I believe that the 440 packing will last as long or longer. In the 20 plus years I have been working with equipment this has been my experience. Hope that it will be yours.
Would you please provide part number for the packing kit. I found a few online, not sure which one is the correct one. Thanks.
Titan # 704-586 fits all these units Impact 440/540/640
👏👏👍👍🙏
What type of symptoms do wore out packings produce?
Pressure will drop, hose can chatter (bounce or vibrate up and down), take longer to prime. in general if you are spraying okay in the morning and you come back after lunch and you need to turn up the pressure, this is a good indication that your packing are wearing out. also keep an eye out for paint that is coming out of the top of the packings, you can see this in the front or the back of the pump block. if you see this you should get your pump repacked soon.
Where are you.. De donde eres..??
How much Indian price
🤘🤘👍👍🇧🇷🇧🇷👏👏👍👍
100%
What aligns the filter?
If you set the pump on its bottom (fan side down) then the pump is facing up, you can just screw the manifold filter straight in.
@@havingfuninthesun9459 ok so nothing really holds it in place. You just try to center it up and screw it on at the same time?
@@havingfuninthesun9459 should there be an o ring sealing the housing?
@@00powerstrokin the filter has a spring insert in it, the housing has a place that is molded for the spring and filter to center and seal, this is were the filter and spring pushes up against, so the filter, spring and housing are all set in the proper place.
@@havingfuninthesun9459 thanks
Gawd make the music stop , geewzusss
There is a volume control located near your device. Click the bottom button to lower the sound, push the up button to self destruct.
Naaaahhh I'm buying a new one
30 bucks vs 1000-1700 bucks. Hmmm decisions.