Let's Fix It - This XBOX ONE has no power at all
ฝัง
- เผยแพร่เมื่อ 30 ส.ค. 2023
- Follow along as I disassemble, diagnose, and try to fix this original Xbox One that shows no signs of life. Unfortunately, there are signs it had life inside it at one point.
/ @fixmorewasteless
Tools Used in this video (affiliate links):
Soldering Station (it's cheap but I've had no issues) - amzn.to/3OGfglf
iFixit Driver Kit - amzn.to/43NSDzZ
Tweezers - amzn.to/3qAN4qn
Solder Wick Braid - amzn.to/43Oyn0V
Isopropyl alcohol - amzn.to/3NiWcbV
Hot Air Station (Not sure I can recommend as I haven't had it long enough. It's cheap so don't expect much.) - amzn.to/47Sq3QN
Music provided by TheRelaxedMovement.
Check it out here: / therelaxedmovement
/ therelaxedmovement
© Henry Keate t/a TheRelaxedMovement. All Rights Reserved - บันเทิง
I've had a few people commenting to see if I can fix device. Well, if you're interested in having me try to fix your device, feel free to shoot me an email at fixmorewasteless@gmail.com. This isn't a paid service, just something I want to do to help those who need it. You'd be responsible for return shipping and any major parts like screens, so it's not a completely free service, but I'm not charging for the repair. Email me about your device and what the issue is and I'll let you know if I think I can help.
Thanks for trying man. I got one with clean inside but wont turn on. I see white residue on the back of the board could be liquid. But dont have knowledge to find out what is going on. Power supply is working. When plugged in Fan should move a tiny bit which is not hapenning.
What you're doing is great my hat's off to you I wish that this was basic teaching unfortunately it's lost art thank you for the very detailed video. Did you end up finding out what was wrong? Keep up making the videos
Thanks I appreciate that. Never did figure out the issue. I still have it. Maybe I’ll revisit it at some point and see if more experience helps me pin point the problem.
Hi there! Two mini-advices if I may :D
1) It'll be easier for you to clean using a toothbrush instead of a qtip, because the qtip can't reach some places, will bump into everything, and leave some threads around.
2) It would be nice to have a miniature of the pinout of the mosfet on a corner when you were checking them, or to have a bit more context about what are those actually doing.
But in any case good work! See you on next video \o/
Thanks for the tips! Always trying to learn and improve. And then remember to actually put it to use in the moment lol.
Maybe it's something you've already tested, but does the orange light stay on on the power brick? I have no power to mine, but I think the issue is the power brick because the orange light comes on then dies out instantly when connected to mains which suggests faulty power supply. I opened up my power brick and found leaky capacitors which is apparently a known issue with these first generation Xbox Ones. I'm going to replace the capacitors on mine which should hopefully fix the issue! Good luck with yours. I enjoyed watching you go through troubleshooting the board and hope to one day have enough knowledge to be able to perform the same kind of troubleshooting.
Thanks for the comment! I used a known good power supply but that’s a great place to start. Like you said the light might come on at first and then fade out once connected. A short on the board can also make the light turn off since it’s trying to protect itself. Hopefully the leaky capacitors didn’t make too much of a mess for you.
Good luck on fixing it and take care when working on the power supply!
En que modo pongo el multimetro para hacer estas mediciones? , lo puse en 2m ohms y me marcan .037 todos.
I literally unattached the side panel easily put it on the side and it came on ...thanks otherwise I would have just bought a new one like a month later the top of the line of course
The mosfets are all coming back 0.6 in my case. The resistors along the bottom are all around 3ohms. The internals and board were very dusty (REALLY bad...) when I opened the case. This one died after just 1yr from release. The board looks good w/ no visible corrosion (though my magnifying glass isn't as powerful as yours. I didn't check the lights when I plugged it in so that I can't tell you anything until I put it back together. No power. No beeps. Any ideas?
If you know the power supply is working, then I would suspect that there's a short on one of the power rails on the board.
My Xbox one has an orange light on the power brick and the power button and disc eject isn’t working. Do you think it’s just the power brick or something else?
When you plug the power brick in does the light turn from orange to white at all? If the brick has light but the console doesn't respond at all when you try to turn it on, it's most likely something within the console. If no light, no beeps I would suspect the same mosfets I tested in the video that power the 12v rail.
Where dou buy small size 8334 mosfet from I got5×6 size from farnell I think the size is 3×3 m
I buy most of my components from Aliexpress. You might be able to find that size on eBay but it’ll cost more than Aliexpress. Only problem with Aliexpress is the shipping time but if that’s not an issue then it’s worth a look.
Yo i need help with my Xbox it’s the same type in this video I just can’t unhook any of the stuff
Do you mean the outer shell or the connectors for disc drive, hard drive, etc.? The outer shell is a real pia.
Yeah I got it took awhile though