Very common homelite mcculloch poulan carburetor a back in the day very good carbs and easy to rebuild the kit is on eBay and it is walbro k10-SDC KIT #Homelite #XL12 #HowTo
This probably would have been a useful video if your hands had not been in the way, actually allowing the camera to show what you were doing. And actually showing the removal and replacement of the carb in the saw would REALLY have been helpful for someone who has never done it before.
hey on the metering side where do you set the lever for the needle. I see other people take a straight edge on the very top and I see other people adjust it inside down in more just confused. I assume you adjust it down in more. thanks in advance to hear back.
I appreciate the tutorial but, if you're going to be showing how to install really small parts like this, try adjusting the camera so that people can see what you're actually doing. Maybe in front or even better, overhead view. Otherwise, it's basically useless. You can't see through your hands (Just FYI).
I'm not a good videoer by any means. But your video wasn't much help because of the distance and your hands hid everything you were doing. Small 2 stroke carbs have intimidated me for years.
Thank you for the video. I rebuilt my SD-73 and realized I missed the first insert (the beige overlay) on the fuel pump..
But thanks for posting this. I'm fighting one of those carbs, and don't have much experience rebuilding them...
No problem man I appreciate you coming by let me know if you need any more i would surely help you in anyway
This probably would have been a useful video if your hands had not been in the way, actually allowing the camera to show what you were doing. And actually showing the removal and replacement of the carb in the saw would REALLY have been helpful for someone who has never done it before.
Yea but I didn't have the right camera nor did I have enough room to put it+Bob-Ed
Agree! No excuses.
Homelite XL 12 SDC carburetor rebuild k10-SDC
hey on the metering side where do you set the lever for the needle. I see other people take a straight edge on the very top and I see other people adjust it inside down in more just confused. I assume you adjust it down in more. thanks in advance to hear back.
Malheureusement, on ne voie que les mains et les doigts, il y a une formation a faire pour la mise en scène ??
I appreciate the tutorial but, if you're going to be showing how to install really small parts like this, try adjusting the camera so that people can see what you're actually doing. Maybe in front or even better, overhead view. Otherwise, it's basically useless. You can't see through your hands (Just FYI).
do u or have u ever rebuilt a homelite 925 cause i have 2 and i need to rebuild the carbs
+William Woods no I have not sorry
Can't see carb..........hands in the way
Wow. All you had to do was put the camera in front of you and then you wouldn't have blocked the view of everything that you did...
It happens man can’t always be perfect I understand what you mean
I'm not a good videoer by any means. But your video wasn't much help because of the distance and your hands hid everything you were doing. Small 2 stroke carbs have intimidated me for years.