These older 7.3L diesels are worth 100% MORE than the EPA garbage choked crap the Big-3 are selling now at $80k or more. The fact you found a GOOD one AND it's a manual transmission is even better. 🙌
AMEN. I could not agree more. I paid 1500 for my welding truck and couldn’t be happier. I probably only have 5k in it and it’s waaaay better than a new piece of junk I could buy new.
I know absolutely nothing about cars. Any questions I have I ask my brother as he is a mechanic. I don’t know how you stumbled on my feed but man I’m so glad you did. You had me laughing the whole time. I’m looking forward to watching your past and new videos! Liked and subscribed!
My '94 IDI Turbo is one of my favorite trucks. AND it'll blow the doors off of a first gen Powerstroke. It's straight piped and THE BEST sounding diesel EVER! And I'm a CUMMINS NUT.😊 Put a Holley RED pump on it, BYPASS the factory lift pump. WAY easier to prime the system, especially after changing fuel filter(s). International IDIs will NOT start unless you have a functioning glow plug system or plug in the block heater. I don't care if it's 90 degrees outside. Starting fluid KILLS these things. The glow pluds (if they're working) can ignite it and fire all of the cyliders at one time. It can break rings and give it that lopey starting noise your getting due to low compress from those broken ring cyliders etc.
These Holley green and red pumps are news to me. This turbo truck is surprisingly peppy, I can’t wait to put the turbo on my f250. Yeah, it’s been cold here so it has not helped the probably no glow plug working factor.
O’Reillys ☘️ carry’s them . I know most other places will as well just don’t know if in stock. They have treated me well. Follow directions and don’t run 20 year old varnish like I did and you will be fine .
sad seeing trucks like these get used for parts but can’t blame you probably not worth the resto and will be nice for your truck and future projects i love this channel keep up the work your getting me through my sick day rn 😂
Glad it have helped! Hope you’re feeling better. It’s a lot more valuable for me to make my truck better. It will be a good parts truck for a long time.
Never load ether in an old IDI. It bends valves and potentially rods. That's why it kept locking as it was cranking. I wanted to reach through the screen and take the can out of your hand as I was watching.
Oh man how I wish I could have a truck like this to make my own videos on. I mean, ive got my ranger, but most of the stuff i could make videos on aren’t worth it. But I think im gonna help you guys get to a wider audience by subscribing. Not only was the intro entertaining but the first few minutes are also entertaining
International Harvester IDI (from Indirect Injection) engine is a four-stroke diesel V8 engine used in International Harvester school buses, trucks, Ford F-Series pickups, and Ford E-Series vans from the 1983 to 1994 model years. The engine was built in two displacements: 420 cubic inches (6.9 L), which was used in Ford trucks from 1983 until 1987, and 444 cubic inches (7.3 L), which was used in Ford trucks from 1988 until 1994 (naturally aspirated) and in 1993 and 1994 (turbocharged).
It's sooooo unfair how ALL the trucks you buy have custom front and rear bumpers!! 🤣 What a deal! Glad to see you guys could get it running and moving. Don't blame you for parting it out. Engine sounds *tired* for sure. Hope you and Zane are doing well. Happy wrenching fellas 🔧🔩
Makes me wish I had never sold my 93 F250! The old turbo diesel was awesome! I drove that truck for 15+ years and only sold it when my knee's started giving me trouble and it hurt to push the clutch. I never hooked on to anything that the truck would not move!
That's a unicorn truck, holy bajeezus. As much as I distrust the 7.3 IDI, and as much as that's compounded by the factory boost, a MECHANICAL turbodiesel, manual trans, 4X4 is hard enough to find.. but a crew cab, and with crank windows? That's probably the only one left. I hope the cylinder walls hold up for you.
Not sure about those rear hubs but those rear calipers are on the the wrong side which is why the bleeder screws were at the top. It should be at the bottom which means the left side needs to be put on the right side.
The wheel don't fot cause that's a 05 and up rear end. It's 8 on 170 bolt pattern not 8 on 6.5. Watching you guys butcher that was pretty sad to see. You can see clearly it won't fit. Also put ot in 4x4 I wanna see you blow up the transfer case. Gonna be great when you find the front is a 4.110 and thar tear is a 3.73. 😅😂
Without watching the rest of the video, the newer Ford wheels and disc brakes in the back make me wonder if someone did an axle swap at some point to Super Duty axles
Hi TC. I just started following your page and I really enjoy it. I was wondering, what do you do with all the trucks you rescue? Like this one for example?
Might be a mid year of 93 if it has a turbo, 94 I think was the only time the idi 7.3 had a turbo. Pretty rare to see them now. That rear end is out of an 2005 and newer superduty, they're actually wider than even the 99-04's and is the reason the hub looks so short on it. I wonder if they planned on doing the front coil spring dana 60 front axle set up as well? And with the reliability of the ole idi that would be a sweet rig
"How did they get anything done in the 90s?" These NA idis were towing 14,000lbs plus all the time, they were indestructible so we jad more time not needing constant repair and codes reset. They would pull hills as fast as modern semis do with 14,000lbs plus behind them. I know you doubt, but a 2020 Freightliner Cascadia will pull a hill at half rated load at 25-35mph depending on hill. The idi with more tham rated load will pull the same 25-35mph on the same hills. With a turbo and replacing that damn squashed downpipe they used to keep it from outpowering the powerstroke, they way out run stock semis on the road. Shame on the axle, I'd much rather have the original brakes and axles. I hauled with both, i much rather ha e the good parking brake and i never had a drum brake fail to provide enough brakes. I dont know why everyone needs discs on the back, semis run drums still, and they are enough on the back. I just happen to be an old school farmer and I know ABS sucks with age, and discs are just not needed on the rears.
Vacuum pump is thst sound u hear and the rear I probably 8x170 and put a 4 inch exhaust on it will sound good and put a bit of atv in the tank will lube Injectors so no knocking
Maybe when your son grows up you can tell him about Harry Chapin. He sung and wrote "Cats in the Cradle" That song is about him and his son growing up. I tell my 3 boys to pass that song on to their boys. Just a suggestion. If ya get some time listen to that song. Thank you for the video.
Oh I know that song all too well. Gets me right in the feels. Only difference is I always want to give my children time. It’s hard to appreciate the moment, time is never enough.
At some point that rearend has been changed the 93 didnt come with rear disc brakes i have a 95 f250 with drum brakes and a 1 ton rear factory. That rearend has been changed to a later model at some point
@@thatbluebricknose not one that early ...the 92 thru early 96 came with rear drum brakes ..the rear disc brakes and 8x170 lug pattern came after the 96 model yr my 95 f250 xlhd has 1 ton towing package with drum brakes thats a 92 model with a late model rear end
TC Finds OBS Ford F350 Crew Cab 7.3 Diesel Clean up the Truck New Paint Job and New Leather seats and New Wheels and Tires New Bumper and Back Bumper Led Headlights and Tail lights put Cab light on the Truck ????????
Had a guy try again last week to buy my 95 f350 7.3 crewcab long bed dually and had to tell him NO thank you but NO, I don't even have 190,000 on it and I couldn't replace it for 20,000 so no thanks
yeah it sounds like a miss out the exhaust and my idi doesnt hardly smoke at all even cold like this one does it probably need an injector or something
Now all you need is either a smoke stack up through the bed with a 10 inch tip, or just add a large coffee can size tailpipe paired with a set of ridiculously wide oversized rims wrapped in rubber bands.
i would say something no i wont waste breath waste effort was my thought process trying process you got your work cut out you could swap it not sure your intent but um few rollback and other none lifted piles are cheaper my thing is yes get old mobil home frame build car trailer bumper pull then worth it
Yeah I agree, take trailer and make truck lift with 37’s go better swapped and probably change over to ramp with the turbo should wake up better for the fuel. Probably parting it out though.
@@Whitetrash_Customs yes I use it on most the cars I flip to sale. People love the smoke grey it’s made by rust oleum u get it by the gallon for 50 bucks
@@tcfinds I really hate that for the guy. was this recently? Y’all may have a new viewer tho if that’s the case. I think I see him on a thumbnail from 2 weeks ago
@@roxastherogue last week actually. We didn’t like how he made the vids, funded, operated, provided the property, bought the cars or did anything. So I told him it was time to part ways.
These older 7.3L diesels are worth 100% MORE than the EPA garbage choked crap the Big-3 are selling now at $80k or more. The fact you found a GOOD one AND it's a manual transmission is even better. 🙌
AMEN. I could not agree more. I paid 1500 for my welding truck and couldn’t be happier. I probably only have 5k in it and it’s waaaay better than a new piece of junk I could buy new.
Like your TH-cam videos @@tcfinds
There not worth jack shit. There gutless.
Man, your channel is so undervalued. Nice video
I really appreciate that. Gives me hope!
Peg from zip ties and bias plies would be proud of use of either 🤣
That’s what I hear!
You were kinda stingy with the Cosby sauce.
I know absolutely nothing about cars. Any questions I have I ask my brother as he is a mechanic. I don’t know how you stumbled on my feed but man I’m so glad you did. You had me laughing the whole time. I’m looking forward to watching your past and new videos! Liked and subscribed!
Ha! Glad you stumbled upon us. Thanks very much for subscribing! Definitely more to come!
My '94 IDI Turbo is one of my favorite trucks. AND it'll blow the doors off of a first gen Powerstroke.
It's straight piped and THE BEST sounding diesel EVER!
And I'm a CUMMINS NUT.😊
Put a Holley RED pump on it, BYPASS the factory lift pump.
WAY easier to prime the system, especially after changing fuel filter(s).
International IDIs will NOT start unless you have a functioning glow plug system or plug in the block heater. I don't care if it's 90 degrees outside.
Starting fluid KILLS these things. The glow pluds (if they're working) can ignite it and fire all of the cyliders at one time. It can break rings and give it that lopey starting noise your getting due to low compress from those broken ring cyliders etc.
Holley Green Pump is what we used on a idi. Seems to be the way to go! Idi’s are great.
These Holley green and red pumps are news to me. This turbo truck is surprisingly peppy, I can’t wait to put the turbo on my f250. Yeah, it’s been cold here so it has not helped the probably no glow plug working factor.
O’Reillys ☘️ carry’s them . I know most other places will as well just don’t know if in stock. They have treated me well. Follow directions and don’t run 20 year old varnish like I did and you will be fine .
This truck deserves a semi resto (look over wiring, new headliner, ect) and maybe do a giveaway or something
Heck yeah Man, I’m in on the giveaway. Make sure you guys let us know
One day we may do a give away! Gotta get a few more subs first!
Heck I’d take it in its current condition in a giveaway always wanted an old ford idi, would be a nice project
heck ya i always wanted a 7.3 it’s me and my dads dream truck to do a rebuild on
sad seeing trucks like these get used for parts but can’t blame you probably not worth the resto and will be nice for your truck and future projects i love this channel keep up the work your getting me through my sick day rn 😂
Glad it have helped! Hope you’re feeling better. It’s a lot more valuable for me to make my truck better. It will be a good parts truck for a long time.
Never load ether in an old IDI. It bends valves and potentially rods. That's why it kept locking as it was cranking. I wanted to reach through the screen and take the can out of your hand as I was watching.
Yeah I know…makes for good TV
Everybody has their way i suppose and i watched it so im not knocking your video. I enjoyed it. Good job.
@@tcfinds
@@greggamandabarkus4235 thank you
Congrats Guy's on finally getting the ford truck running and no brakes. head liner needs to come down..
Thanks!
This channel is so good, deserves way more subs! Keep cranking out the good content, man!
I really appreciate that! One day we will make it big time! I don’t like building fence for a living.
Oh man how I wish I could have a truck like this to make my own videos on. I mean, ive got my ranger, but most of the stuff i could make videos on aren’t worth it. But I think im gonna help you guys get to a wider audience by subscribing. Not only was the intro entertaining but the first few minutes are also entertaining
Hey! Give it a shot, there are always folks that have a niche, thanks for the sub!
You can tell the mustache is a whiskey drinker,bud swished the fuel filter under his nose like a glass of the goods stuff😂
Hahaha in a former life I did love the whiskey! Now I waste my money on junky old trucks
@zaneedwards7869 I'll take the next "junk"yall find. Yall got me junk shopping in Texas when I live in florida
@ryanhays4326 wait till you see the next vid of the gem we recently acquired
International Harvester IDI (from Indirect Injection) engine is a four-stroke diesel V8 engine used in International Harvester school buses, trucks, Ford F-Series pickups, and Ford E-Series vans from the 1983 to 1994 model years. The engine was built in two displacements: 420 cubic inches (6.9 L), which was used in Ford trucks from 1983 until 1987, and 444 cubic inches (7.3 L), which was used in Ford trucks from 1988 until 1994 (naturally aspirated) and in 1993 and 1994 (turbocharged).
Everyone should read this.
@@tcfinds I big fav international harvester it's from my home state IL I live 5 minutes from the nav star plant in Melrose park ill
It's sooooo unfair how ALL the trucks you buy have custom front and rear bumpers!! 🤣 What a deal! Glad to see you guys could get it running and moving. Don't blame you for parting it out. Engine sounds *tired* for sure. Hope you and Zane are doing well. Happy wrenching fellas 🔧🔩
Because TEXAS!! hahaha everything's got real bumpers on em
@@Whitetrash_Customs Makes sense! 🤣
Like Zane said! TEXAS! I may throw it up fer sale to see if I can make some money. If not itll be goood parts.
you have earned a new subscriber here like the content these other guys ive watched let the fame get to them like mortskie repair etc
plus your closer im guessing texas im in oklahoma i go to texas alot lol
Thanks! I try to keep it real.
Makes me wish I had never sold my 93 F250! The old turbo diesel was awesome! I drove that truck for 15+ years and only sold it when my knee's started giving me trouble and it hurt to push the clutch. I never hooked on to anything that the truck would not move!
I have my 92 f250 and adore it, I’ll never sell it.
That's a unicorn truck, holy bajeezus. As much as I distrust the 7.3 IDI, and as much as that's compounded by the factory boost, a MECHANICAL turbodiesel, manual trans, 4X4 is hard enough to find.. but a crew cab, and with crank windows?
That's probably the only one left.
I hope the cylinder walls hold up for you.
Not sure about those rear hubs but those rear calipers are on the the wrong side which is why the bleeder screws were at the top. It should be at the bottom which means the left side needs to be put on the right side.
Bleeder screws are always at the top........ air travels up..
This is true.
If ya end up doing a giveaway this ole Afghanistan vet would love it. Thats my dream truck! Love the obs 7.3 and the 6.9 idi’s
Thank you for your service. 🇺🇸 🦅
Thank you for your service. This one is unfortunately parts, maybe one day we can do a give away!
That's a newer '99 up Super Duty axle/wheel that's hub centric. STUCK on the register.
Y'all remind me of Tim the tool Man Taylor and Al. But I love it.
Bahaha I actually had that thought the other day!
You stole some happy little creatures home so you could clean up poop?
The wheel don't fot cause that's a 05 and up rear end. It's 8 on 170 bolt pattern not 8 on 6.5. Watching you guys butcher that was pretty sad to see. You can see clearly it won't fit. Also put ot in 4x4 I wanna see you blow up the transfer case. Gonna be great when you find the front is a 4.110 and thar tear is a 3.73. 😅😂
Without watching the rest of the video, the newer Ford wheels and disc brakes in the back make me wonder if someone did an axle swap at some point to Super Duty axles
Yep. Someone did
We wrangled up a set of those 90s 16x7 wheels for our 67 highboy
Nice!!
Hi TC. I just started following your page and I really enjoy it. I was wondering, what do you do with all the trucks you rescue? Like this one for example?
Thanks for tuning in! Check out the ford axle swap episode and you’ll see what happens to this truck.
where is this magical place where you can just drag crew cab OBS's out of? I wanna go!
South Texas! A couple late nights and I drug home 2 of them!
Might be a mid year of 93 if it has a turbo, 94 I think was the only time the idi 7.3 had a turbo. Pretty rare to see them now. That rear end is out of an 2005 and newer superduty, they're actually wider than even the 99-04's and is the reason the hub looks so short on it. I wonder if they planned on doing the front coil spring dana 60 front axle set up as well? And with the reliability of the ole idi that would be a sweet rig
Someone was definitely trying to do all the right things with it.
"How did they get anything done in the 90s?" These NA idis were towing 14,000lbs plus all the time, they were indestructible so we jad more time not needing constant repair and codes reset. They would pull hills as fast as modern semis do with 14,000lbs plus behind them. I know you doubt, but a 2020 Freightliner Cascadia will pull a hill at half rated load at 25-35mph depending on hill. The idi with more tham rated load will pull the same 25-35mph on the same hills. With a turbo and replacing that damn squashed downpipe they used to keep it from outpowering the powerstroke, they way out run stock semis on the road. Shame on the axle, I'd much rather have the original brakes and axles. I hauled with both, i much rather ha e the good parking brake and i never had a drum brake fail to provide enough brakes. I dont know why everyone needs discs on the back, semis run drums still, and they are enough on the back. I just happen to be an old school farmer and I know ABS sucks with age, and discs are just not needed on the rears.
Can’t believe it’s running after all that ether on top of glow plugs.
Anymore time on that fuel filter going say ur huffing
There is possibly worst to sniff lol
The IDI Motors require half throttle to start in this situation. Easy on the Cosby sauce.
I learned that more and more as it progressed. Yeah I’m not a fan of the ole Cosby bit it fit the” bill” in the moment.
That pinging sound is either knock. Aka too much starting fluid
Vacuum pump is thst sound u hear and the rear I probably 8x170 and put a 4 inch exhaust on it will sound good and put a bit of atv in the tank will lube Injectors so no knocking
Not a bad old rig!
That truck started has plenty more life someone would restore that worth to sell it to a good home
Lay a gas soaked rag over the intake and it helps a lot more that either and safer
Good to know.
The rear axle has been replaced with one from a newer truck. I could tell the second I saw that hub
You guys are hilarious lol subscribed 😂
Thanks!!
Yeah I'm with the other guy here. This truck needs a clean,fixed and just drive it
I’ve got too many to begin with, plus I’m really looking forward to making my f-250 a lot better with these parts.
No better way to get a IDI 7.3 going . Peg would approve
Truth!
Maybe when your son grows up you can tell him about Harry Chapin. He sung and wrote "Cats in the Cradle" That song is about him and his son growing up. I tell my 3 boys to pass that song on to their boys. Just a suggestion. If ya get some time listen to that song. Thank you for the video.
Oh I know that song all too well. Gets me right in the feels. Only difference is I always want to give my children time. It’s hard to appreciate the moment, time is never enough.
@@tcfinds That is SO true. But just something I thought of to pass along. Take Care
Time for Tonya Harding wooo
My dream truck
99 and up Ford is 8x170.
Awesome video bud!!
Thank you! I appreciate the compliment!
Only an idiot would use a hammer on a battery.😊
For the record…I use a battery on a hammer.
@tcfinds I've seent it!!!!
holy shit that red 10th gen ford is identical to mine
Cool!
Unless it's got major internal problems, a diesel will always run. Must be nice to live in truck country, nothing but junk here in va 😢
That’s gotta stink. I have had only a could vehicles that had lived up north and that’s awful.
hi from Indianapolis,Indiana 😊
Hello!
What happen to the blue and white truck green and white truck
Got sold awhile back
is that red crew cab for sale?
Good ol 7.3 idi turbo
The more u spray it the more it doesnt wanna start
Must be a 7.3l idi.
How do you not know that using ether on a turbo is very bad man you seem like a knowledgeable man wd40 is what you should be using
Oh I know better, but I found it inside the cab..so why not!
I want something like that
That axel is def a 1999 and newer
Yep.
At some point that rearend has been changed the 93 didnt come with rear disc brakes i have a 95 f250 with drum brakes and a 1 ton rear factory. That rearend has been changed to a later model at some point
Pretty sure it might have been an option. Since the Bricknose, for example, I know all the “F Super Duty’s” came with disc brake rears
@thatbluebricknose it's gotta be out of a newer truck since it's 8x170 lug pattern
@@thatbluebricknose not one that early ...the 92 thru early 96 came with rear drum brakes ..the rear disc brakes and 8x170 lug pattern came after the 96 model yr my 95 f250 xlhd has 1 ton towing package with drum brakes thats a 92 model with a late model rear end
You don't know what you are doing all that Starting Fluid it is a shame you did that to that truck in did a thumbs up in Smiling about it
Makes for good TV
Need a new air compesser.
This is quite true
What size tires did you put on it?
315 75 r16
what year is the truck?
92
TC Finds OBS Ford F350 Crew Cab 7.3 Diesel Clean up the Truck New Paint Job and New Leather seats and New Wheels and Tires New Bumper and Back Bumper Led Headlights and Tail lights put Cab light on the Truck ????????
Unfortunately she’s not worth it for me to save, too many valuable parts to put towards my f250
go easy on the starting fluid.
Starting fluid makes for good television
Stop spraying starting fluid in it.
Never!
Had a guy try again last week to buy my 95 f350 7.3 crewcab long bed dually and had to tell him NO thank you but NO, I don't even have 190,000 on it and I couldn't replace it for 20,000 so no thanks
Almost sounds like a injector is not happy
yeah it sounds like a miss out the exhaust and my idi doesnt hardly smoke at all even cold like this one does it probably need an injector or something
@ivanshapli1827 ya the one I had was a hell of a truck I need to get ahold of a nother one but a injector is what it sounds like to me
So it’s a ford idi 7.3 power stroke
It’s a ford 7.3 idi, with a factory ford turbo. It’s before a Powerstroke.
Wheres the 92 powerstroke
Got sold awhile back
Now all you need is either a smoke stack up through the bed with a 10 inch tip, or just add a large coffee can size tailpipe paired with a set of ridiculously wide oversized rims wrapped in rubber bands.
Fix the injures and it will run a lot buter
I love your video
i would say something no i wont waste breath waste effort was my thought process trying process you got your work cut out
you could swap it not sure your intent but um few rollback and other none lifted piles are cheaper my thing is yes get old mobil home frame build car trailer bumper pull then worth it
Do what?
Yeah I agree, take trailer and make truck lift with 37’s go better swapped and probably change over to ramp with the turbo should wake up better for the fuel. Probably parting it out though.
Ford IDI? Check. Oakley Frogskins? Check. = Subscribed.
Heck yeah! I appreciate it!!
That's ether knock. You should stop spraying if you hear that
Yeah, makes for good Television
So bad I couldn't finish watching it.
Great!
The horror!!!!! 😂😂😂😂😂
Your putting to much ether and then the truck is going to want to start with just ether
She wants to be bottle fed!
Part 2 ❤
Part 2 will be “parting it out 🥲”
So many obs in there
Probably 10 atleast
They don’t like Cosby sauce IDI trucks hate it
It wanted it!!
That truck simply needs some tlc. 7.3 idi turbo diesel, manual. Somebody would gladly buy that and restore it.
I’m gonna put it up for sale to give it a chance.
Cheap paint job. Tractor paint is about the cheapest and actually looks good also
Can confirm, my second gen is painted with tractor paint with hardener added, after a good waxing shines as great as any new car
@@Whitetrash_Customs yes I use it on most the cars I flip to sale. People love the smoke grey it’s made by rust oleum u get it by the gallon for 50 bucks
Can You give it to me bro😊
That dude with the glasses is a little much.
Yeah we agree. He actually got fired.
@@tcfinds I really hate that for the guy. was this recently? Y’all may have a new viewer tho if that’s the case. I think I see him on a thumbnail from 2 weeks ago
@@roxastherogue last week actually. We didn’t like how he made the vids, funded, operated, provided the property, bought the cars or did anything. So I told him it was time to part ways.
@@tcfinds I’m sorry to hear that. But I’ll be around then. Thanks for answering my questions!
Its astonishing how dumb people are.......@roxastherogue3363
Get new wipers in your bloody car bloody screaming
Can’t believe it’s running after all that ether on top of glow plugs.
Like a scolded dog!