I have a problem with my lock it doesn't turn the deadbolt when I have it set up normally I even set it up off the door and it still wasn't working. However I did notice it was able to move the deadbolt when I have the battery piece on upside down. Any thoughts on how I can fix it or should i return it
Any options for me if I don't have the user codes? The sticker you show in the video (on the back of the battery chamber) is not on my lock, as yours shows here. I don't have one at all. I only have a very small white label with a barcode and a letter B, followed by a 6 digit number. (B###-###) Anything I can do to obtain a Code A and a Code B as presented in the video?
Hope you can help me. Althow i have tried multiple times what is showed in vidéo it Still doesnt work . Any other solutions. This all happend following battery change again with 4 sets on new battery’s
Got confused. I have the previous users access code but that’s all I have. You are saying that the previous user should also have two other codes. Besides, their access code that I need to use?, That person is gone and all I have is the access code. Does that mean I need to buy a new lock? Thanks
Why did my default user codes stop working? The lock function on the keypad works, but I can’t unlock it with the default user codes. If I do a factory reset, will I have to delete it from the app and add it back again?
Hi, I have the exact same lock but when I did the reset procedure the red light on the front stays on and it beeps 3 times. Tried the 2nd code as well and the lock will do the same. We just bought this house built in April of 2021. Changed the batteries and still no deal.
@@samhaslam4660 Actually I changed the batteries again but using the industrial batteries from my work place, and for some reason it started working again. I guess you can't use cheapo batteries with this lock
I'm having trouble with the Encode only lasting a few months on a beachfront property. I think it has to do with the humidity. Is there a way to stop moisture from entering under the keypad?
I'm in AZ. I don't have a clue about humidity. 😂. It's touted as weather proof exterior side from Schlage. Call their customer support, see if they have any suggestions. 1 (888) 805-9837
if I do setup at home and send it to be installed (on vacation home), how will it calibrate to the door (as left or right)? seems this is a 1-shot action forcing install before wifi setup. ideas?
Just set it up on any door that swings the same way as the one you'll be installing on and you'll be fine. Here's our article on door handing. www.acmelocksmith.com/blog/what-you-need-to-know-before-buying-new-locks/#How-to-find-door-handing
Terrible lock, every few months it will not let me add or delete any codes unless it's reset on site. Property is in Florida I live in Illinois. I'm getting rid of this thing. I was searching for possible ways to reset remotely and nothing unless I'm present agh
Schlage has the longest warranty at two years. If it's younger that, call them for a replacement. Unfortunately, none of the smart locks I am aware of allow for remote resetting.
My Encode does not power on. I replaced the batteries, tried resetting it as well - I can only lock / unlock it manually. Not really sure what happened.
This lock is defective, per se. I am having similar issues and they are refusing to repair them. There are other videos regarding Schlage locks not working after cold weather. Let me know if others are having issues. I think the electronics are breaking after the first winter/summer for a large group of the locks owned where the weather changes.
@@rvgordon1 Interesting. We definitely don't see anything like that here in AZ. But there is a 3-year warranty,, so they ought to send you out a new one.
@@toughfox When the lock is connected to the app, the default codes are disabled automatically. If you are not using the app, enter programming mode. Enter one of the codes to delete. Hit the "X" button. Enter the code to delete again. Hit the check mark button.
@@toughfox looks like you ha e to reset the thing completely. I'm struggling to find this information too which should be very easy to do but I'm puzzled
I don’t understand! I did all the steps . I get the setting now to the factory setting ! How come he didn’t explain how to put the new code ? I think he’s trying to get as many people to ask ! Every time you get a comment is good for his ratings/$ !!! Not happy with that !
This lock is very annoying for remote landlords! It cannot be setup for Wi-Fi UNLESS it can connect immediately! Stupid engineers! All of my companies IoT can be configured and it does not force a reject if that network is not available. And it ERASES all PIN codes when it is configured so I can't setup codes, ship it and ask my technician to setup wi-fi! I just don't get WHY anyone suggests this for rental property - it is almost worthless...
How do I change the code after the reset?? Thank you
Is there a video on just how to change you pass code not reset factory
This is awesome, thanks! My lock stopped working and the touchpad was non-responsive. Did a reset and so far so good!
Great to hear!
I pressed user code and lock didn’t move and it beeped at me with red X. Any suggestions
Well done with excellent pace. I was able to complete first time.
This could have been explained in 10 seconds, but this guy managed to take an excruciating 3 minutes and 46 seconds to do it.
Thanks for watching.
WHAT!!!!??? I thought it was at least 13 minutes…. Jk lol clear information though
Lol.
I have a problem with my lock it doesn't turn the deadbolt when I have it set up normally I even set it up off the door and it still wasn't working. However I did notice it was able to move the deadbolt when I have the battery piece on upside down. Any thoughts on how I can fix it or should i return it
Never mind I figured it out. I factory reset it and it started working somehow. I don't understand one bit lol
Thank you for the easy to understand info.
You are welcome!
Thank you Robert! This isn’t documented anywhere that I could find. You saved my marriage! 🤣
Super helpful! Thanks!
So glad!
Hi, How to add and delete codes... Thank you! could not find the instruction
It all has to be done from the app for this lock.
Thank you so much for this video it really helped. How do we set up new user codes after we reset it? Thank you again
Did you figure out how to change it. I have exact same model and need to change to new code juts closed on a home today and need this done.
Finally, thank you.
Any options for me if I don't have the user codes? The sticker you show in the video (on the back of the battery chamber) is not on my lock, as yours shows here. I don't have one at all. I only have a very small white label with a barcode and a letter B, followed by a 6 digit number. (B###-###) Anything I can do to obtain a Code A and a Code B as presented in the video?
You could try their customer support, but you may be out of luck.
Hope you can help me. Althow i have tried multiple times what is showed in vidéo it Still doesnt work . Any other solutions. This all happend following battery change again with 4 sets on new battery’s
Thank you for this video. I pushed down on reset and nothing happens??
Got confused. I have the previous users access code but that’s all I have. You are saying that the previous user should also have two other codes. Besides, their access code that I need to use?,
That person is gone and all I have is the access code. Does that mean I need to buy a new lock? Thanks
See if the sticker is on the inside of the lock with the original codes. Then just reset it and use the original codes or change them after.
I changed the barrel and now my lock doesn’t work. Should I do a reset?
Is there a way to do a key pin reset (not the access code) like the kiwi locks?
Here is how to reset this lock.
th-cam.com/video/Qaq2kgXoHvg/w-d-xo.html
Why did my default user codes stop working? The lock function on the keypad works, but I can’t unlock it with the default user codes. If I do a factory reset, will I have to delete it from the app and add it back again?
What if they still have a copy of the key. Then they can just bypass the code right?
Rekey all locks when you move into a home, even the mailbox!
@@LocksmithRecommended when you say rekey you mean buy new locks and keys. Or you mean alter the lock and keys?
Great question. This link. 😉
www.acmelocksmith.com/blog/what-is-lock-rekeying/
Hi, I have the exact same lock but when I did the reset procedure the red light on the front stays on and it beeps 3 times. Tried the 2nd code as well and the lock will do the same. We just bought this house built in April of 2021. Changed the batteries and still no deal.
I have the same issue. Were you able to find a solution?
@@samhaslam4660 Actually I changed the batteries again but using the industrial batteries from my work place, and for some reason it started working again. I guess you can't use cheapo batteries with this lock
@@chrisguapo69 Good to know! thanks for the help. I'll go try that.
I'm having trouble with the Encode only lasting a few months on a beachfront property. I think it has to do with the humidity. Is there a way to stop moisture from entering under the keypad?
I'm in AZ. I don't have a clue about humidity. 😂. It's touted as weather proof exterior side from Schlage. Call their customer support, see if they have any suggestions. 1 (888) 805-9837
Actually there’s an issue with some encodes eating batteries. Contact Schlage they will ship a replacement!
This gasket is working well for me and my property is 300 yards from the beach in Galveston, Tx.
th-cam.com/video/aUUOekSWYZQ/w-d-xo.html
Good work
Yes I did figure it out and thank you again for the video. But the big event here is you closing on a home big big congratulations
Help…my Schlage lock will not work even after changing batteries and pressing the reset button. Relegated to using the physical key to enter the home.
You did not explain how to put in the new code? Only discussed the orientation of the lock. But what steps to take to enter our own code? Thanks
We have a video on how to program this lock.
th-cam.com/video/6LK5wc8eGZg/w-d-xo.html
One I hold the button and it turns blue and reset it self, why I can't put in a new pin
Thanks, the trick of favtory reset helped me reinstall mine
Good to hear
My lock gives a red X and two tone error message when I press the lock key. What’s wrong with it?
How do we change the Battery?
Battery pack just pull out. You can see me insert it in this video. th-cam.com/video/vT-Zps-Ri88/w-d-xo.html
if I do setup at home and send it to be installed (on vacation home), how will it calibrate to the door (as left or right)? seems this is a 1-shot action forcing install before wifi setup. ideas?
Just set it up on any door that swings the same way as the one you'll be installing on and you'll be fine. Here's our article on door handing.
www.acmelocksmith.com/blog/what-you-need-to-know-before-buying-new-locks/#How-to-find-door-handing
@@LocksmithRecommended Not simple. I did 'build' it with no door and it does not generate an error but it also erased its memory.
Man, great vid. My shit works now.
😎
Yeah but how do I just change the past code???
THANK YOU!!!
You're welcome!
Terrible lock, every few months it will not let me add or delete any codes unless it's reset on site. Property is in Florida I live in Illinois. I'm getting rid of this thing.
I was searching for possible ways to reset remotely and nothing unless I'm present agh
Schlage has the longest warranty at two years. If it's younger that, call them for a replacement. Unfortunately, none of the smart locks I am aware of allow for remote resetting.
I have the same issue!! Very frustrating
Thank you sir!!!
Most welcome!
My Encode does not power on. I replaced the batteries, tried resetting it as well - I can only lock / unlock it manually. Not really sure what happened.
Schlage has a 3-year warranty. If it's less than 3-years old, give them a call.
@@LocksmithRecommended Didn’t know warranty was 3 years! Thanks, I’ll give them a call! 😁
This lock is defective, per se. I am having similar issues and they are refusing to repair them. There are other videos regarding Schlage locks not working after cold weather. Let me know if others are having issues. I think the electronics are breaking after the first winter/summer for a large group of the locks owned where the weather changes.
@@rvgordon1 Interesting. We definitely don't see anything like that here in AZ. But there is a 3-year warranty,, so they ought to send you out a new one.
@@unrena what did you end up doing? My lock is doing the same thing, it’s no longer powering on and I’ve only had it for about 5 months.
How do you put your own code in?
We have a video on it. th-cam.com/video/vT-Zps-Ri88/w-d-xo.html
Once you have reset it how do you personalize your own code?
Here's our video on that. th-cam.com/video/vT-Zps-Ri88/w-d-xo.html
@@LocksmithRecommended That video doesn't show how to change the user Code A and B. How do you do that?
@@toughfox When the lock is connected to the app, the default codes are disabled automatically. If you are not using the app, enter programming mode. Enter one of the codes to delete. Hit the "X" button. Enter the code to delete again. Hit the check mark button.
@@toughfox looks like you ha e to reset the thing completely. I'm struggling to find this information too which should be very easy to do but I'm puzzled
Perfect....Thanks
I can reset it but none of the buttons work I can’t put my user codes in..? Anyone?
Get to the reset man
Patience is a virtue...
I changed the batteries twice because the keypad is unresponsive. I tried the reset button and that did nothing. Any tips?
Hit up their customer support, they're pretty good. And the lock's electronics should be warrantied for 3 years. 1 (888) 805-9837
I don’t understand! I did all the steps . I get the setting now to the factory setting ! How come he didn’t explain how to put the new code ? I think he’s trying to get as many people to ask ! Every time you get a comment is good for his ratings/$ !!! Not happy with that !
Here's our video on lock programming.
th-cam.com/video/6LK5wc8eGZg/w-d-xo.html
Nice video. But buyer beware with this lock. I woild not receipt if you want it to work on wifi. The worst customer support in the industry.
100% agree with your comment - worst support in the industry …
4
This lock is very annoying for remote landlords! It cannot be setup for Wi-Fi UNLESS it can connect immediately! Stupid engineers! All of my companies IoT can be configured and it does not force a reject if that network is not available. And it ERASES all PIN codes when it is configured so I can't setup codes, ship it and ask my technician to setup wi-fi! I just don't get WHY anyone suggests this for rental property - it is almost worthless...
That's good feedback! We've never tried to set one up remotely, and then connect to a Wi-Fi onsite.
Came here to see how to delete factory codes and of course he didnt explain that.
We have a whole in depth video on this lock. It explains exactly what you're looking for. 👍🏻👍🏻👍🏻
Stop talking and get to the point
So how do you put in your new code????
th-cam.com/video/vT-Zps-Ri88/w-d-xo.html
I am not using the app.. so how do you change the factory 4 digit code??? Without using the app.