Must Have Upgrades For Crisp Cutting & Engraving - xTool D1
ฝัง
- เผยแพร่เมื่อ 15 เม.ย. 2022
- Check out how you can upgrade your xTool D1 to cut without worrying about burning what's under it and get crisp & clean engravings every time.
From xTool:
xTool D1 Pro Laser Engraving & Cutting machine - bit.ly/xToolD1-10W
xTool D1 Air Assist Set - bit.ly/xToolD1AirAssistSet
xTool Honeycomb Cut Bed - bit.ly/xToolHoneycombBed
xTool Materials - bit.ly/xToolMaterials
xTool 20W Diode Laser Module - bit.ly/xToolDiodeLaserModule20W
xTool Enclosure Smoke-proof Cover - bit.ly/xToolEnclosure
xTool Smoke Purifier - bit.ly/xToolSmokePurifier
From Amazon:
xTool Enclosure Smoke-proof Cover - amzn.to/3dFU8vy
xTool D1 PRO Laser Engraving & Cutting machine - amzn.to/3Ccvf4H
xTool Honeycomb Cut Bed - amzn.to/36hLVdq
xTool RA2 Pro 4-in-1 Laser Rotary - amzn.to/39u4Mn7
xTool D1 Rotary - amzn.to/3tzO0tD
xTool D1 8Pcs Laser Engraver Raiser - amzn.to/3O0q7U8
Honeycomb Working Panel - amzn.to/3txRY60
3MM x 12" x 12" Baltic Birch Plywood - amzn.to/3uMibyJ
1.5mm x 12" x 12" Plywood Sheet - amzn.to/3uLqfje
Metal Business Card Blanks - amzn.to/3uF3oWp
Earring Hooks - amzn.to/3xv2ihU
Free Files:
Engrave Material Test Laser Pattern (LightBurn) - drive.google.com/file/d/1VmzX...
Cut Material Test Laser Pattern (LightBurn) - drive.google.com/file/d/1DVm-...
Earrings Laser Pattern - cartonus.com/jewelry/
Cheap Paid Files:
Earring Display Stand Laser Pattern - bit.ly/EarringDisplay-LaserFile
Witchy Potion Bottle Laser Pattern - bit.ly/WitchyPotionBottle-Las...
Magical Moon Witchy Bug Laser Pattern - bit.ly/MagicalMoonBug-LaserFile
Mushroom Laser Pattern - bit.ly/Mushroom-LaserFile
________________________________________________
If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that.
GomeowCreations.com/tools-and...
GomeowCreations.com/partners-...
Note - Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. 😁👍
________________________________________________
Other Ways To Help Support The Channel:
My PATREON ➜ / gomeowcreations
One time support ➜ paypal.me/gomeowcreations
________________________________________________
Instagram ➜ / gomeowcreations
Facebook ➜ / gomeowcreations
________________________________________________
#xtool #xtoold1 #lasercutter #diy #gomeowcreations - แนวปฏิบัติและการใช้ชีวิต
![[ไฮไลต์] แบดมินตันหญิง ไท่ ซือ หยิง vs เมย์ รัชนก อินทนนท์ รอบแบ่งกลุ่ม | โอลิมปิก 2024](http://i.ytimg.com/vi/LUCG0H5qkpQ/mqdefault.jpg)
Check out how you can upgrade your xTool D1 to cut without worrying about burning what's under it and get crisp & clean engravings every time.
From xTool:
xTool D1 Laser Engraving & Cutting machine - bit.ly/xToolD1-10W
xTool D1 Air Assist Set - bit.ly/xToolD1AirAssistSet
xTool Honeycomb Cut Bed - bit.ly/xToolHoneycombBed
xTool Materials - bit.ly/xToolMaterials
xTool 20W Diode Laser Module - bit.ly/xToolDiodeLaserModule20W
xTool Enclosure Smoke-proof Cover - bit.ly/xToolEnclosure
xTool Smoke Purifier - bit.ly/xToolSmokePurifier
From Amazon:
xTool D1 Laser Engraving & Cutting machine - amzn.to/3jLyLbX
xTool Honeycomb Cut Bed - amzn.to/36hLVdq
xTool RA2 Pro 4-in-1 Laser Rotary - amzn.to/39u4Mn7
xTool D1 Rotary - amzn.to/3tzO0tD
xTool D1 8Pcs Laser Engraver Raiser - amzn.to/3O0q7U8
Honeycomb Working Panel - amzn.to/3txRY60
3MM x 12" x 12" Baltic Birch Plywood - amzn.to/3uMibyJ
1.5mm x 12" x 12" Plywood Sheet - amzn.to/3uLqfje
Metal Business Card Blanks - amzn.to/3uF3oWp
Earring Hooks - amzn.to/3xv2ihU
Free Files:
Engrave Material Test Laser Pattern (LightBurn) - drive.google.com/file/d/1VmzXgLFeil-zOarKUNs0QklVCMqqTEQA/view?usp=sharing
Cut Material Test Laser Pattern (LightBurn) - drive.google.com/file/d/1DVm-P38fsdGC2fzOeuDwhkWSrzNS6A-t/view?usp=sharing
Earrings Laser Pattern - cartonus.com/jewelry/
Cheap Paid Files:
Earring Display Stand Laser Pattern - bit.ly/EarringDisplay-LaserFile
Witchy Potion Bottle Laser Pattern - bit.ly/WitchyPotionBottle-LaserFile
Magical Moon Witchy Bug Laser Pattern - bit.ly/MagicalMoonBug-LaserFile
Mushroom Laser Pattern - bit.ly/Mushroom-LaserFile
________________________________________________
If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that.
GomeowCreations.com/tools-and-materials
GomeowCreations.com/partners-discount-codes
Note - Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. 😁👍
________________________________________________
Other Ways To Help Support The Channel:
My PATREON ➜ patreon.com/GomeowCreations
One time support ➜ paypal.me/gomeowcreations
________________________________________________
Instagram ➜ instagram.com/gomeowcreations/
Facebook ➜ facebook.com/GomeowCreations/
________________________________________________
#xtool #xtoold1 #lasercutter #diy #gomeowcreations
I have watched a few video's now on the Xtool D1. I had thought about trying it on silver sheet and silver rings for etching. You are the first to show me that this will not work on silver. Thank you
No problem and happy to be able to help 😁👍
That was a very informative video. Thanks for that, because I have been wondering whether I should get one. Curious of your recommendation between this and the Sculpfun S10.
No problem and then it comes to the 2 different lasers it is really going to depend on your budget. The xTool does cost more but it does use better parts and is over all just a better laser setup. Both at 10wat lasers so both of them will get the job done. I hope that helps and if you have more questions just ask.
Also I have a video coming out tomorrow about a CO2 laser that blows all the diode lasers out of the water but it's also not cheap.
Does anyone know how to set up the speed in xtool creative space to more than 20mm/sec?
How do you increase your # of
passes
Your earring hooks link is the same as the business cards do you remember which link is the earrings and where did you find the files for them?
I just fixed that and some how if missed this comment for 2 months 😅👍 amzn.to/3uF3oWp
What do you mean the files for them?
Would you please do a video with it cutting cardstock? I know you suggested the upgrades for crisp and clean cuts but, would you do it?
I might be able to do that at some point but if you want clean and crisp cuts you are going to want the honey comb bed for sure. The air setup will also help a lot with charring and stop most flair ups the might start a fire. I have cut card stock in the past as it had no real problem that I can remember to be honest. 😁👍
Can you etch like a stampable logo (leather stamp) out of black acrylic? or is there any other good material for this?
So you might be able to do that. Would this stamp be using ink or just leaving an indent in the material
@@GomeowCreations leaving an indent in the leather. I've seen it been done with a co2 laser thats why im wondering :)
So if that is the case it should work to cut black acrylic fore that but idk how clean it will come out
question I have a d1 10w and it doesn't cut through 3mm plywood any advice I can't get it to work updated and everything I've wasted over $30 in wood trying to cut
What setting are you using? Speed and power
another thing that does is I select the material and width and when I press the cut option it goes back to default in the system
your links for the business card blanks and the earring hooks are the same
Thanks and I just fixed that 😁👍 amzn.to/3uF3oWp
my 20 watt is enroute. acryllic.... how about slightly green? I'm speaking of the stuff one might use in picture frames... or is it a question of transparency?
From what I have seen is that if it is transparent it will not cut it but I have never tried a clear with color to be honest. Let me know if that works out or not.
@@GomeowCreations I will try to remember... I wonder if you need to treat it like glass / tile, with some type of opaque -ness applied...
How do you make the material test cards ?
What software are you using?
@@GomeowCreations I have laser box and I’m going to buy light burn tonight .
The files that I made for those are for laser box only so if you do get it you can download those in the description of this video 👍
Ordered, just waiting for it to ship.
Oh nice, what plans to you have for it?
@@GomeowCreations Start with girts for family, then when comfortable, signs, mugs, keychains and clocks. Love Clocks.
👍👍👍❤️
😁👍
Did you use the 10W or the 20W in this video?
I was using the 10w in this video.
@@GomeowCreations Thank you, you just helped me with my decision :)
Oh happy to help, if you don't mind me asking what are you going to be getting, the 10w or 20w?
@@GomeowCreations The 10w. I been researching for a couple of months day in day out on the watts as well as the M1. With limited videos it was hard to choose but I didn't see a BIG difference with portrait between the 10w and the 20w. The M1 basically does what the D1 does or at least with what I do which is jewelry and engraving. If you have any take on it that could help me, I'm listening 🙂
Yeah the D1 is basically the same as the D1 besides in comes in an enclosure and it can also cut stickers with a knife. I do think the M1 has a smaller work area but it might not matter to you.
I assume this is the 10w version? Are they going get you the 20w to try?
Yes and yes but I will not have that until late May
@@GomeowCreations nice I have been trying to decide if I should buy one and been trying to contact them to get an estimate of price for a full 20w kit. Not sure if it would be best to go 5 (see how i like it etc and possibly upgrade to 20w) , 10 and just keep a 10w and use it as is, or 20w when they offer it as complete unit.
It's hard to buy either the 5 or 10 if I plan to upgrade as it seems like waste of money paying for the smaller laser that wouldn't be used wjen the 20w isnt to far out.
Yeah I under stand what you mean. After using it I think 10w is as low as I would go with a laser. That is after looking at the suggested setting for the 5w vs the 10w. For me at least it's a time saving thing, the 5w with take about 2x the time as the 10w.
I don't know if they are going to make a stand alone 20w one but you would think they would. If I needed to get this now and couldn't wait for the 20w version o would just get the 10w and use it until I can get the 20w unit. If you are getting it to make things to sell, it might even pay for that upgrade on its own. Just my thoughts 😁👍
@@GomeowCreations thanks for taking the time to reply especially quickly and for the honest feedback I truly appreciate it! Do you have any affiliate discount code/links if I did make a purchase, cause I appreciate your help. Also happen to have a good way to contact them I have sent like 8 emails amd got 2 responses that didn't fully answer any of the questions.
So the links in the description of this video are all affiliate links. Sadly I don't have any discount code or a good way to contact them other than the person that deals with me directly and I can't give out their email, I hope that is understandable.
When it comes to your questions, maybe I can help you with them?
👍🏼👍🏼👍🏼👍🏼👍🏼👌🏼🍎😎
it would be nice if they offered just the air assist parts, don't really need the pump
You might be able to contact them about that and get them and if not to you might be able to 3d print some of the parts and get some fitting to make your own