What I actually did. I had HP EliteDesk 800 G5 mini. Took the power cable off, took the plastic jumper, pressed the yellow button and hold it, reconnected the power cable, turn the pc on and started to press F10, then it went into the BIOS without removing the battery or doing anything else. Great video, thanks, hope this comment help somebody else!
A key thing to note, you must press and hold the secret button in the middle front, for several minutes. I observed that the power led and fan turned on and off at least 3 times, with no video. They video turned on long enough that it said RTC and settings were reset . Then one more time, turned off and on, of it's own accord, and was able to see bios unlocked, and released the button then. When I released it sooner (after only 2 reboots) it had reset the time (RTC) but not the password. Tested this pattern and honed in the technique with 3 different HP EliteBook 800 G5's
I need to know how to reset the password on an 800 G6. the yellow button is by the ram and the pswd jumper by the cpu, however, there is just a place for one but no jumper pins are there. do I short them together?
This is the answer. I pulled the jumper, booted and hit F10 . From there I was able to reset it back to factory defaults. Easy as pie on the G5. Thank you!
HI, i have a HP prodesk 600 G5 and its not turning on, when i press the POWER button the led light will turn on but when i release the power buttton it will not turn on, what would be the problem? i try to open it the cpu fan is not working even i hold the power button for atleast 10seconds. hope you can help me :)
Any idea how to do this on a G6? There is no jumper there. There is a small push button switch, but holding that and booting reset the clock but not the BIOS password.
![[LIVE] : ONE ลุมพินี 71 วันนี้!! คู่เอก "ทรงชัยน้อย vs รักษ์"](http://i.ytimg.com/vi/_AGPnq2p6Js/mqdefault.jpg)
![เปิดบ้านสุดหรู "เเจ็ค the ghost" ลั่นถ้าป๋องกพลลำบากผมเลี้ยงเอง!! l [Nickynachat]](http://i.ytimg.com/vi/1xbW4vULqGc/mqdefault.jpg)
What I actually did. I had HP EliteDesk 800 G5 mini. Took the power cable off, took the plastic jumper, pressed the yellow button and hold it, reconnected the power cable, turn the pc on and started to press F10, then it went into the BIOS without removing the battery or doing anything else. Great video, thanks, hope this comment help somebody else!
This helped me a lot. It really works for my prodesk 405 G4. Much better than na video tut.
Helpful tip, thank you.
What is plastic jumper
@@shantanu3812 Little plastic thing that connects two metal pins. Google it, it will show you the picture.
A key thing to note, you must press and hold the secret button in the middle front, for several minutes. I observed that the power led and fan turned on and off at least 3 times, with no video. They video turned on long enough that it said RTC and settings were reset . Then one more time, turned off and on, of it's own accord, and was able to see bios unlocked, and released the button then. When I released it sooner (after only 2 reboots) it had reset the time (RTC) but not the password. Tested this pattern and honed in the technique with 3 different HP EliteBook 800 G5's
This worked for me
any idea on how to do the rest on HP EliteDesk 800 G6, there in no jumper pin for the model and holding the bottom only not working
800 G4. Worked! Thank you Mister!!!
Thank you, it worked.
mini 800G4 worked. Thank alot Bro
I need to know how to reset the password on an 800 G6. the yellow button is by the ram and the pswd jumper by the cpu, however, there is just a place for one but no jumper pins are there. do I short them together?
Thanks dude
Thank so much 🎉❤
Thanks worked
Upgrade , only disconect the jumper and normal turn on then press F10 , only this.
This is the answer. I pulled the jumper, booted and hit F10 . From there I was able to reset it back to factory defaults. Easy as pie on the G5. Thank you!
HI, i have a HP prodesk 600 G5 and its not turning on, when i press the POWER button the led light will turn on but when i release the power buttton it will not turn on, what would be the problem? i try to open it the cpu fan is not working even i hold the power button for atleast 10seconds.
hope you can help me :)
how to do it on G3?
any idea how to reset bios pass on HP EliteDesk 800 G6, it seems like there is no jumper on g6 version
I send you video for reset
@@Dz.AXprojectthanks, do you upload it on youtube?
hello, I have a pro desk 600 G6 and I found a cmos pin but the pin are not welded, how I can reset admin password?
Any uodate on your g6?
@@lorraldrenzrobaro5391 no, nothing, you have some update how to reset?
how about 800 G6, same like this? please help.
Did you figure it out?
I have same issue
I have a 805 G6 with same issue..ugh!!! HP will not budge on it...unless you know creditals on owner
Any update on your g6?
Any idea how to do this on a G6? There is no jumper there. There is a small push button switch, but holding that and booting reset the clock but not the BIOS password.
Hey! Did you find an answer for this, I have the same issue, I see the pswd by the fan, the jumper place is there but no jumper🤷🏾♂️
I soldered the pins and put a jumper there. But still, the password is not reset, no matter what combinations of enabling and disabling I do. :(
I have the same motherboard, no pin ar welded, did you find a solution? please let me know. Thanks a lot@@user-cc9fn1sj1r
Actualicé Windows, después se actualizo sola la BIOS y prende y se apaga en bucle : v