The default setting would be Hi. The hi/ lo switch did not exist on older Henry models and was only added on due to EU regulations on emissions/ efficiency.
@@hellothereknownasunknownus6535 without the pcb the vacuum will run at full power. If you so wish you can replace pcb as they are about £20. Better than scrapping an otherwise good vacuum cleaner.
@@reviewsfixeshacksmunsur3805 buy the new auto save pcb, numatic was aware of this problem so they flipped the pcb so the electrical side wasn’t exposed to the carbon
THAT WAS ABSOLUTELY DREADFUL.TOTALLY APPALLING PRESENTATION.THAT COULD MISLEAD SOMEBODY INTO AN ELECTRICAL FATALITY.FAR TOO RUSHED,VAGUE,UNCLEAR.YOU EXPLAIN DANGEROUS ELECTRICS,STEP BY STEP WITH CLEAR DIAGRAMS,NUMBERED STEPS AND EXPLANATIONS.THAT WAS VERY POOR.
![[TH] G2 vs PRX | EDG vs FUT - VALORANT Champions 2024 DAY 4](http://i.ytimg.com/vi/Bkr_qM7dIaM/mqdefault.jpg)
Awesome, worked a treat and saved me buying a new machine. Many thanks.
No problem. Glad it helped.
I`m a bit thick when it comes to electrics but that was so well explained the old Henry is back in action. cheers.
I’m glad it’s been useful. Please like and subscribe. Thanks
Just repaired my one, Thank You for the instructions, that save me a few quid, couldn't of dun it without your help,
Henry is now back in action! Thank you so much.
Worked like a charm. Saved me buying the pcb for £18.99 and the misses can get back to cleaning lol
Thanks for this - my Henry is now back up and running - we always used it at full power, so actually an improvement!
Great tutorial! One I was serving for someone working perfectly fine!!!
Great video mate thank you! 5 minutes straight to the point! Hetty can go back to hoovering up bricks!
Thanks Dude , fixed mine that was in the cover for months.
Found this to be the most helpful video. Thanks.
Had same problem not working, removed pcb, now its working, thanks for video help
Worked for me, thanks
Where do you buy the white cable? And could you not replace the white cable straight from beginning other than taking all them out?
Can we change simple rocker switch ?
What is the black grey thing called going around blue brown cable some thing to do with noise or power disruption
It is just a holder.
My Henry does not work and the light of the Hi switch is not lighting up. Do you know if in this case the PCB is faulty or the Hi switch?
I had same problem would start and go off, the high switch didn't light, so I removed the pcb, put all back and works fine
@@smkahn Thank you for your information. 👍🏻👍🏻👍🏻
Yep. Faulty PCB. Do as in video
But will the hover be on low mode or high mode
On high
Perfect it’s a done deal will be done today finger crossed Henry will be alive again
what is the default suction without the pcb and hi lo switch
The default setting would be Hi. The hi/ lo switch did not exist on older Henry models and was only added on due to EU regulations on emissions/ efficiency.
Now that he has removed the pcb, Henry will now run at his full 1200w
@@hellothereknownasunknownus6535 without the pcb the vacuum will run at full power. If you so wish you can replace pcb as they are about £20. Better than scrapping an otherwise good vacuum cleaner.
@@reviewsfixeshacksmunsur3805 I would buy another pcb, but to make it last longer I would take it out once a year and clean the carbon dust off it
@@reviewsfixeshacksmunsur3805 buy the new auto save pcb, numatic was aware of this problem so they flipped the pcb so the electrical side wasn’t exposed to the carbon
Buy a new pcb there only 16 quid
THAT WAS ABSOLUTELY DREADFUL.TOTALLY APPALLING PRESENTATION.THAT COULD MISLEAD SOMEBODY INTO AN ELECTRICAL FATALITY.FAR TOO RUSHED,VAGUE,UNCLEAR.YOU EXPLAIN DANGEROUS ELECTRICS,STEP BY STEP WITH CLEAR DIAGRAMS,NUMBERED STEPS AND EXPLANATIONS.THAT WAS VERY POOR.
My Hi Lo switch wasn't working and this fix has sorted it out. Cheers lad🫡
I’m glad it’s helped so many people. Many would have scrapped an otherwise perfectly good vacuum cleaner.