YOOHE Paintless Dent Repair Puller Kit - Dent Puller Slide Hammer T-Bar, 16pcs Dent Removal 4/2020

Our paintless dent removal tools dent puller is a lightweight glue tab pulling tool, It not only for all kinds of cars dent removal, but also suitable for truck, Motorcycle, washing machine, Refrigerators and Hail damage and so on.
No labor cost and paint material cost, our products are exactly designed to save your time and money.
If you want to save money as well as enjoy the DIY time, thisT-Bar puller tools could be your best choice.
Specifications:
Number of Pieces: 23 (1pc T-Bar + 16 pcs Puller Tabs+6 pcs glue sticks )
Color: Silver + black
Type: paintless dent removal tools kit
Package Weight: 1480g
Function: Paintless dent removal
How to use:
1.Clean the dent with a clean wet cloth;
2.Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3.Choice the proper drawing gasket, you have 16 sizes gasket, Large dent requires a large drawing gasket.
4.Pull the trigger and apply the drawing gasket with extruded glue.
5.Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 3-5 minutes. The cooling time should be less than 8 minutes and should be shorter slightly in winter);
6.While use this dent removel T Bar tools, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a knockdown tool.
8.Use alcohol and plastic shovel to clean up the residual glue.
Packing lncluded:
1x 2 in 1 Dent Removel T Bar Tools
16x Black Glue Pulling Tabs
3x Yellow Glue Sticks(7mmx270mm)
3x Black Glue Sticks (7mmx270mm)
1x pcs Operation Manual card
Features & details
【SAVE TIME &COST】: Dent repair kit can save a lot of money for you compared with the auto body shops, our paintless dent removal tools kit can help you repair your cars by yourself for many times.
【 INSPIRED DESIGN】 : Our slide hammer T bar puller tool uses a lever-type design for metal panel dent repair works, and can also be decomposed into two different T bar, clever use.
【Widely used】: The Slide Hammer T-Bar Tool is not only for car dent removal, but also can be used refrigerator, motorcycle body, washing machine and hail damage.
【Corresponding to different dents】: The Slide Hammer Tool contains two kinds of plastic tabs, a total of 16pcs professional tabs can be repaired against a variety of dents, dent repair lifter can also be adjusted, according to the size of the dent can be adjusted.
【DURABLE】: Tempered high carbon stainless steels and standard stainless steel are used depending on the design of a particular tool. rubber and durable plastic, they will don't hurt the auto surface, very sturdy and keep a long lifetime.

[@GhadSpeed]

I just ordered mines. Can’t wait.

[@miriamymarianomorales7438]

How did it work?

[@GhadSpeed]

@@miriamymarianomorales7438 it works just depends on how bad the dent is

[@changewaterchangeenvironment]

There are many kits out there for sale online. May be if there was a repair job done using this kit that you purchased, then your video is useful. Also, I think the spring should go in after the slider. Otherwise, how to create the hammer effect when pulling back?

[@mino-d-ng3642]

Yea, this kit wasn't good enough for professional use