SUPER CLEAN PDR REPAIR ON A FRONT FENDER | Paintless Dent Removal Uk 🇬🇧|By Dent-Remover
ฝัง
- เผยแพร่เมื่อ 15 พ.ค. 2024
- Watch Me Repair a Front Fender With Crease Damage, How I Repaired It...
Hi thank you for checking out my latest repair video, This time I’m repairing a Suzuki Celerio Front Fender (Wing)
The damage was caused by a stray vehicle door making contact with the panel. This dent had a sharp crease in the centre and it took a while to complete BUT the results speak for themselves
The dent was very tough to repair but with a lot of patience I was able to save the panel from filler and paint...
I hope you can take away some information from this if your a new dent technician or really interested in the job.
If your a potential customer looking for an accountable technician then I hope you are happy with how we operate, you can see our many repairs and this will give you the peace of mind when booking your repair in. We repair many customers vehicles up and down the country, we are in Beverley and we set aside all the time in the world and look after you if you travel to us.
Paintless Dent Removal or PDR is a method of removing minor dings and dents from the vehicle bodywork without the need for filler and paintwork. This is a highly skilled process in which the dent(s) is massaged from the rear of the panel or sometimes from the front using glue pulling methods.
Join this channel to get access to perks:
/ @dentremover01
----------------------Chapters----------------------
00:00 Intro
00:26 Close look at the dent
02:12 Strip the panel
02:54 Picking the tools
03:50 Starting the repair
06:25 The Bodyline
10:14 Change position
11:13 Sharp tips
13:18 Nib & Polish
14:44 Finishing touches
15:14 Conclusion
15:42 Take a look at the finished repair!
16:33 End screen
Repaired, Filmed & Edited by Martin Sadler
Please SHARE this video and give a LIKE & SUBSCRIBE to keep in touch with all the latest videos…
We love using the Gangrene tabs from Black Plague PDR, The crease tabs are the toughest on the market that ive tried so far, especially the 38mm crease tabs!! Use "Dent-Remover" in the discount section at check out!
get yours by clicking this link and also spend over $100 for free shipping
www.blackplaguepdr.com/discou...
For more information on what we are about
www.dent-remover.co.uk
All tools used can be purchased from
www.tdntools.com
Here's a £3 off coupon for your first order at TDN Tools UK. To accept, use my referral link:
i.refs.cc/CEBKYF0P?smile_ref=e...
Soundtrack by epidemic sounds
Whitegold by Tommy ljungberg
Sun melts wave by ôman
Cyan waters by Magnofield
See you soon!
#PDR #DentRemoverBeverley #PaintlessDentRemoval #EastSide#ThoseDentGuys #DentRepair #cardetailer #automobileRepairShop #DentRepairUk #PdrVideos #MobileDentTechnician #imiCertified #dentVid #pdrTech #pdrTechnician #HullDents #DentsHull #IMI #HullDent #CityOfCulture2017 #MartinSadler - ยานยนต์และพาหนะ
Thanks for checking out my latest repair video. I hope you enjoy this as much as I did doing the repair. Any questions just leave them below
Thanks Martin
if u dont mind plz tell the cost u got of this dent repair
thanks
Thanks for the quick answer.
Tell me how mach the cost that you can come to repair my car here in Saudi Arabia in fact we dont have that mach of tehnecal to repair like this issue they always advice me to paint if you want I will take pic for the dent then and shere it with you And then tell me about the expected result and the expensive price of your visit and fix it.
Hi Salah thanks for your message. I think it would be very costly for me to come to you, there is a great dent repair place around your area of the world, Pro Dent Middle East, they are in Dubai? I’d imagine they will be able to help you out better than me coming from the UK
And I can also highly recommend them
Does this help you Salah?
Thanks Martin
Yes and Thank you for your time and effort.
Thank you Salah
I've had a lot of PDRs done over the years but this standard of professionalism and perfectionism is on another level.
Wow thank you Eric 🙌🏼
@@dentremover01 Can I please ask how much you charged the customer for this piece of work ?
I can’t remember but if a dent like this came in now it would be from £250 +vT (£300 onwards)
A perfect example of someone who sets focus on work to produce quality. Many set their focus on time, racing to finish henceforth poor quality result. You're a perfectionist. Everyone needing a paintless dent repair wants you.
Wow thank you Noah! I really appreciate your comment and sorry I hadnt seen your comment sooner.
I pride myself on quality and for those who don’t know what PDR is I love to show the full process to educate and hopefully save you a bodyshop repair
Take care Martin
As a retired paint and body man I see a lot of horrifying videos of people doing "body work" I was very impressed with your work I would not hesitate to let you repair my car
Wow thank you! Appreciate your comment
Never in a million years has I guessed that crease would come out without body filler. The craftsmanship to make the fender go from having such a deep crease to it looking like it just came fresh out of the factory is just on another level!
Thank you very much for your kind comment and feedback. With time patience and a bit of skill it’s amazing what we can repair. If you want to subscribe then I have a massive dent repair coming soon which even we didn’t think would repair!
Thank you
Martin
@@dentremover01 I already subscribed, I'm looking forward to seeing that massive dent repair!
I've never seen bodywork done before. I would have thought it was impossible to remove a crease. I'm so impressed with your work.
Thank you so much 🙌🏼
Ok this guy is an expert craftsman you can see how much pride he has in his work. Hard to find a pro like this..
Wow, such a PDR masterclass. In a way - it looks unreal, with an outstanding result.
Thank you so much
If I was doing this myself on my car, would have been happy around the 8 or 9 min mark. But I love watching a professional who takes pride in their work.
For me the job was already done after 9.00 minutes of the video approximately. Unbelievable such a high level of perfectionism.
Thank you dávid I really appreciate your comment,
Every repair I carry out I like to get as good as possible. I know that all my customers are completely satisfied then and it’s also satisfaction for me too
Thanks for watching and hope you subscribed
Martin
I thought the same until he mentioned the details
Wow mate...that was a spectacular fix. I was watching the Man Of Steel who has a number of anchor points in the concrete floor. He has a Hustler bar but both of your technologies employ delicate hammering with a multitude of tips etc.
The finger tip control of the back of the panel in conjunction with the light bars reflecting off the panel certainly makes both YOU & The Man Of Steel highly watchable.
My mate thought he could wave his induction hot rod over the dozens of hail damaged dents on his cars bonnet and roof. Your system in the right hands leaves the Hot Rod Wand for dead. But in hindsight him being a GP Doctor he didn't have any more knowledge than holding the coil over the dent...I emplored him to allow me to make a leverage tool...I'm a Toolmaker....to be gently rocked to allow it to pop out. No...the patient and the patience evaporated at the same time.
Where do you get your kit. Is it a panel beater shop supplier. Are there courses in SYDNEY. I should Google that myself. I'm multi skilled anyway. Did a panel beating journeyman course in 1980. Made a perfect VW hubcaps including the indented VW...also a hub cap removing gripper. Round with two hook claws on 2 short lengths.
Some bastrad stole it from the TAFE display cabinet..I wanted to get it chromed..then framed.
For my Dad. I'll go to a mate and get a dinged panel of some sort. Today's cars lend themselves to this type of repair. You have a masterful touch and eye. A great working tutorial.
Buster
Beautiful job but there’s no way anyone can do this job. Even with the right tools Maybe practice with a junk car first before tackling on the car itself.
@@dentremover01 what was the cost?
That was actually therapeutic to watch. The "shadow casting" light was inspiring. Great work.
I'm not gonna lie. I'm blown away that you could get a dent like that to look that good without just replacing the panel.
Thank you Plasma junkie I try my best and also like to show what’s possible with pdr.
Thanks for watching and merry Christmas
Only one person in my city who does this work, hes booked months ahead, high skill work for sure, I,m always thoroughly impressed by this process.
Amazing! Who’s that?
the repair looked awesome halfway through the video, but to go to that extent is pure perfection. Awesome job and explanation
Thank you Peter! My next video (Green Fiesta ST) coming out soon is similar to this and the results are just as clean!
Thanks for watching
Once again an outstanding show of craftsmanship.
Thank you Rickie really appreciate your comment
Good job
“PERFECTO” Master craftsman and well done! One thing you forgot was breakdown on what you charged for this repair. Also provide itemized charge breakdown for each segment to viewers. I ask that because it would be very helpful for your subscribers to know in case we may need such services one day in the future. I understand prices and charge may vary in different locals and countries but a base price idea is better then going at it blindfolded. Hope you can help. Again great job you’re a true professional.
Thank you for your great feedback. I’ve tried this in the past and I get a lot of negative comments. People just see a large figure and think it’s a lot of money and don’t see the value in the work.
I wish we got expert people like you work near by where I live. I got two small dents on my car that are less serious than what you just repaired and shops around me making it sound impossible to fix. Much respect man🤘
Thank you for your comment and I hope you’ve had your repair done by now 🙌🏼
Why would anyone “Thumbs Down” this video??? As a 22 year PDR Tech myself, I can say he did everything perfectly! The only thing I would have done differently is keep the heat gun on it constantly until the point where he changed to a sharper tip. Nice work my friend!!!
Hi Mark? Thanks and I really have no idea why I get the dislikes! But that’s TH-cam for you!…. I really appreciate your input and congratulations on doing it so long. Regards the heat gun to be fair I don’t use heat that often, only on deep stuff or dents where I think the paint is likely to crack. Winter time is a different story though!
I hope I got your name right? (Mark)
Thanks Martin
What incredible work. I was hoping to find out how to do a similar repair on my car, but all I can do is admire this professional, I sure can't do this myself at home!
Thank you so much. I would defo ask your local tech first and get their opinion on it. Or buy a panel and practice on it first before attempting your car
I must say PDR has come a long way in 25 years. Ive seen results back then that didnt come close to this and people were amazed. I havent been in body repair for 20 yrs and was pretty damn good at it, couldve easily worked that out, primed and paint with no filler. I had no idea that this finished result could be achieved paintless. Well done sir!!
Hi M Davis thanks for your great comment..... PDR is amazing and every repair I carry out I get great satisfaction from it. The boundaries ad capabilities have certainly been pushed over the years. I still use my panel beating methods when using PDR but in a controlled manner so not to damage the paint work.
I’m very happy you enjoyed the video, hope you subscribed and also check my other big repairs in the future
Take care, Martin
I'm sure alot of the thing that makes it appear easy is thinner metal.
I have been watching hundreds of different PDR videos on YT. So many using tools common on Amazon and Ebay where they keep commenting they are not expecting to perform a 100% repair but indicating they know their customer will still be happy. Then I find PDR videos like yours where tools I did not even know existed are incorporated and the details in the process is amazing. I bet your customers are convinced you must have replaced the whole panel as they look perfect. It is a treat to watch a master craftsman display his skills. Thanks for taking the time to make this videos.
Hi Craig.
Wow thank you for your great comment!
I have quite a few special tools and every one of those on my tool cart has a purpose. My customers are all very happy with the results….. it’s like a magic repair!!
Take care and thanks again 🙏
Martin
Awesome job! Love how you showed all the steps and talked us through the process.
Thanks Harvard, merry Christmas
i was a mud king years ago in the 70's & 80's i really like the new way, GOOD JOB !
Nothing wrong with a bit of filler! Loved the smell
I dont give thumbs up often.. who cares, but YOU get a thumbs UP!
Wow thanks again Travis!! Really appreciate it
Amazing job! Never knew the level of work and detail that’s goes into this.
Thanks for watching and commenting 🙌🏼
This Paintless Dent Removal is truly an art and science all wrapped into one! Great work! I like how he shows behind the dent while working on it!
Thank you Agostino
Great skills and clear explanation. This is an art.
PDR guys make great money. I enjoy doing this almost as much as refinishing
dent removing is just about skill. this is so satisfying.
Thank you Vincent! 🙌🏼
excellent explanation Martin, very well explained, great job, congratulations !!!
Very top that lever lever on the tire. Big hug!!
The eason I can tell you are the very best, is how you keep going EVEN AFTER IT LOOKS PERFECT to me...honestly if it were my car and you stopped halfway through the vid I'd call it done. This is amazing to watch, you'll make a million pounds and/or dollars mate.
Thank you for your kind words! I like to make all my repairs as good as possible
This really is specialist surgery for panels. I thought it was easy but this video explains in detail how difficult it is. You sir, are an artist.
Hi Steve thank you for your great comment and for watching my repair video! Yes it can take time to repair a dent to a high quality finish. But the results are amazing and the paint is kept factory which is great for the resale value
Hi Steve thank you for your great comment and for watching my repair video! Yes it can take time to repair a dent to a high quality finish. But the results are amazing and the paint is kept factory which is great for the resale value
I was a bodyman for about 10 years. Autobody work is kind of like magic and PDR is on another level.
Thank you Tylor I really appreciate your comment and glad you enjoyed this video
Well I just finally was able to watch this and I must say what an outstanding video Martin. Finally someone showing exactly what's going on behind the panel as well that is extremely important to beginning text... Outstanding sir
Thanks Bobby! I’ve had a few requests for this camera footage in the past so when ever I can get a camera in the panel il do my best to show you guys!
Take care Martin
@@dentremover01 TY
Can't get any better than this. You have put your heart into it.
Thank you Tom and yes I do with all my videos and I hope everyone enjoys them and possibly learns a bit of they are a new tech getting into pdr
Merry Christmas Tom and family
This is cool to see. He works long after I would have called it good which is a sign of his professionalism and skill.
You’ve shown dry dent repairing is a true art. I wish people like you were here in Pakistan.
This was absolutely fantastic! But you made it seem a LOT simpler than it probably is. I bet it takes a LOT of experience! I learned what good workmanship is!
Hi Goutam thanks, yes I’ve been doing
this every day for quite a few years. I suppose it does look quite easy, it’s all about pressure so if you push slightly too hard then the paint would crack, again when tapping the panel down, if you do this too hard then you’ll put lots of dents back in. It’s like any other skills, making clay pots on a spinning wheel, painting art….
Really appreciate your comment and I’m happy to have shown you a great repair
Take care, Martin
Amazing . Who would have thought it possible .. Seeing is believing .. well done Mr. perfectionist .
Thanks! Very pleased you enjoyed the video Richard
definitley recommend this chap - has carried out some work on both mine and my wife's car,. outstanding.
Thank you for your kind words and for coming to see me with your cars. Let me know if you get anymore in the future and mention you left a comment and il give you 10% off 🙌🏼
An artist in your own right!
Thank you Albert 🙌🏼
Absolutely amazing skills and craftsmanship, I’m a student in vehicle accident repair, going into my level 3 in September and video like are really inspiring. I’m a car man and petrolhead. This is the industry for me. Skills mate, skills. Do you have links for the tools and kits you’re using as I’m about to begin buying my toolset.
Unbelievable I could watch this all day long
Well done 👍
Thank you Baz it’s very satisfying to do and to watch!
I hope you subscribed! Thanks Martin
A true craftsman. You should be on TV. 👏
Thank you JnV C I really appreciate your kind words! Maybe next year for TV!
I've just taken my Kia Ceed to a car repair shop with a slight dent in the rear door with a slightly raised crease in the middle of the dent. He told me that PDR was not possible because the dent straddles a reinforcing member in the door which is causing the crease line.
Does this sound plausible?
Thanks
You have the best instructional videos out. Thank you for providing us with your knowledge 👍
That's incredible! An art form unto itself, Great Job!!
Thank you Speeddemon3 🙌🏼
Amazing job, with one thing missing : the price!
I’m curious too ? I assume up to half the cost of traditional bodywork etc
Here in the states, a high quality repair like this, using the measurements and factors he wrote on the panel it would be between $625-650 US dollars.
Even if it was the same or a little more the a conventional repair with body work and repaint it is a much better, cleaner, faster, greener repair.
Thanks Colin, Paul and Mark at advanced Dent Repair for answering the question.
Ok the price mentioned was a very decent price and certainly reflects the expertise of the repair. There’s a lot of thought that a pdr repair is half the price of a conventional repair as it’s quick etc, but if a professional carries out a repair to an exeptional standard meaning no flaws etc, then realistically a pdr repair is worth more than a filler and repaint repair. As the skill which goes into magic’in a dent out, keeping the vehicle totally original and maintaining any warranties is priceless really.
That’s what I think anyway, my price was less and in £, but that’s my customers business.
Thanks for watching and indeed commenting
Martin
Ekipmanlar çok güzel harika
@@dentremover01 This video got flagged again because someone else replied. The reason I queried price was to see how it might compare to a typical bodyshop. You say it was less, but being transparent could lead to a lot more work for you rather than bodyshops. I'm not in need of a repair at the moment but wanted an idea if I did.
Patience and know-how... Even if the kid has no interest in body repair, this is a great video to show him/her what can happen when you really work at something methodically and with dedication.
Amazing thank you so much for your great feedback
A Master at his work. Fantastic video mate, thanks for posting
Thank you kindly 🙏
Fantastic work well impressed. I did a course of pdr around 7years ago with zero support after the course providers I decided to back down from the craft. Anyway I'm very interested in doing a full time course if your the teacher. Let me know. All the best and keep up the amazing videos 👍👍
Hi Haroon thanks for your comment and apologies for my delay in replying. I hope you started practicing again? I’m not teaching at the moment but I plan to one day. There’s many good teachers out there though
Thanks Martin
Question: what would/could you do for a dent that has caused paint damage, such as a rock striking the sheet metal? Is there a method you would use to perhaps mix and match up a small amount of paint to add to the area to lessen the look of the paint defect? Great work!
Hi Tim thanks for your question. Yes we will touch up the damaged paint area if requested
We don’t have all the colours but if a customer was to supply a touch up we’d touch it in for free no problem.
It’s not a perfect finish though but would certainly seal the panel from the elements and take your eye off it
Thanks Martin
One of the most interesting videos I've watched on TH-cam. What a perfectionist!
Doesn't get any better than this bro!!!! EXCELLENT WORK!!!!
Bardzo dobra robota 👌🏻👌🏻👌🏻👌🏻
Thank you Lukasz 🔥🙌🏼
This is incredible thank you for sharing. I'd never seen this done, being raised in two body shops I always wanted to see this. Whoever came up with this concept was a genius! Can you tell me labor time wise what went into this? And how long did it take you to learn this skill? also, I take it that when the repair finished the light lines are all straight?
Fantastic job, and a flawless repair you’d never have known the wing panel has been dented so severely especially around the body crease area. 10/10
Thank you very much 😀
What an amazing Craftsmanship... 💪💪💪
Thank you Art 🙌🏼
Wow! I have no interest in dent removal, but I'm subscribing. Based solely on that slick job 👍🏴
Thank you!!! That’s an amazing comment and I’m stoked you found our repair method interesting.
Thanks for subscribing too it means a lot
Take care, Martin
Great work! How long did it take in real time and how much did it cost for this dent?
Great skills so how much did it cost ?
SO NICE TO SEE A PROFESSIONAL AT WORK. GREAT JOB DONE WITH PRIDE.
Incredible! A real craftsman at work and exceptional skill on display.
Thank you BC 🙌🏼
Beautiful job. My favorite part is your attention to detail.
Never knew of this method before. This is awesome.
Wow I’m very happy you found our channel! Thanks for watching 🙌🏼
You sir, are skilled! Amazing craftsmanship!
we’ll done, love all the different tools they provide for various maneuvers. cool idea
Terrific work if only we can find more craftsmanship just like yourself.
Thank you for your kind comment
Wow, I’m truly speechless… amazing work
Worth every dollar. You have hands of magic !
Had a great time at the meetup.
Oh yeah it was really good! Were missing you guys already!
Brilliant, absolutely bloody brilliant! You are a true body work artist. Fantastic video Bruv. Cheers thanks!
This guy's a hero and a real artist, great video!
Absolutely skilled. Perfect craftsman
Another amazing job! I don't know in England, but here in Italy it is difficult to find a serious professional in PDR. There are only few of them and they usually do not have their own workshop but work in other workshops, where they stop for a few hours and then disappear.
Beautiful workmanship ! Thank you for sharing.
Credit where credit is due mate! What a remarkable skill!
Thank you Ian really appreciate your kind words
Ive been using PDR since it was invented in the 90s and it has come a long way. Your work is exemplary. The dents thar can be pulled today are stàggering. Back 20 years ago no one would touch a a swage line dent. Great video. Cheers from Australia
Thank you very much! Yes the boundary’s are being pushed all the time
From the introduction, you hooked us with a quick glimpse of the result before showing us the process.
The results were in fact pristine, & the process had heart & focus. I salute you sir & your work. Subscribed🤙🏽
I had one of these guys come ace dent. The dent was the size of a golf ball he put loads of pin pricks all over the wing then tapped back gently it was perfect just like this chap. Lovely knowledge to have. And no filler true masters.
Hi Mark thanks for your message and glad you had a good experience with PDR
Outstanding Job Martin, & nice tech tips too👍
Wow unbelievable how good that looks! Amazing job
Absolutely amazing. First saw this method being used on a Wheeler Dealers episode.
Hi Pizzababy thanks! Yes I saw that too, it was a very basic look on the skill, I hope my videos show it a little more in-depth for you
Thanks martin
The dent wants to go back to factory, just needs a little help doing it. Excellent work! I just saw another video that makes this look like kindergarten. The entire quarter was smashed in like the hulk hit it, the guy pulled it out. I've never done body work before the skill involved in this is just incredible! Years and years!! Way to go.
Thank you JF and your right. It isn’t easy by any means but with practice comes the Skill 😊
Absolute pleasure to watch a master craftsman @ work.
Top results.
Thanks Adz Zed
Had bonnet repair done on my Audi A3 by Martin after being struck from part of an engine undershield that was picked up from an oncoming car. Left with a crease that no other local dent remover would be willing to try and would have to be a fill repair & repaint to bonnet. Contacted Martin sending him photos & video of damage for which he was prepared to carry out repair. Spent the morning in the lovely town of Beverley where he is located whilst he did the repair. When finished the bonnet looked like it had never been struck in the first place. Amazing, flawless work carried out by a top & decent gent. Also the cost of repair was a fraction of the price to having a fill & complete bonnet spray that would never have matched perfectly anyway.
Wow thank you for a super review I’m really happy I could get your Audi looking like new again and that the overall pdr experience was a good one.
If you ever get anymore damage just pop in and mention you left a comment on TH-cam and we will give you a 15% discount
All the best Martin
thats so flawless. every thing in this vid is 11/10..
Thank you so much
I'm sure another terrific video my friend ! Can't wait
Thanks Bobby I’m sure you’ll love it
Wow! ....my first time. I was really impressed with your wanting to make it perfect!!! I have a neighbor in Chicago with the same dent on their new Kia minivan.
Wow, superb young man. A perfectionist at work. Best I’ve seen.
This is just incredible. Amazing skills and tons of patience
Hi Uszat89 thank you! Very kind of you to leave a great comment I’m really happy you enjoyed my video
Who has those tools in their garage. Not me. LOL🤔🛠️😂. Nice job 👍
wow those lines look so straight through the light. Best work that i seen in a while. You really take great pride in your work. I really enjoyed watching your technique.
Hi Doc thanks yes I use the lines instead of fog to carry out my repairs. I try my best with all the repairs to get than as good as possible, thanks for your kind words and hope you’ve subscribed as I bring out vids all the time
Thanks Martin 🙌🏼
Absolutely blown away by your skill my friend
Thanks Ade H very kind of you to say do
So
Absolutely perfect! Awesome work. Great video too.
Hi HM Roa thank you for your kind comment 🤗
These guys with that skills do magic every day
Incredible workmanship. You are a credit to your trade.
Wow thanks Sean very kind of you 🙌🏼
What an Artform. Spectacular work.
WOW...You my friend have TONS of talent! Thats amazing!!!
Hi Bob thanks! Really appreciate your kind words.
Have a good day
so all done in 17 minutes! that's really amazing, always interesting watching a craftsman at work, certainly I won't be doing that myself, but I'll bring the car to you
Quality workmanship 👏🏽👏🏽👏🏽
This isn’t repairing… this is art
Thank you ! And HNY!
My new video coming soon is very similar to this one! Watch out for a bright green car on my channel! 😊
you got a new subscriber bro, even though i don't work on cars or such, you know what you talking about and your stuff clearly going to help many. Much love