Cam, love banks idash, it is difficult to see all those little numbers . The cts2 works for me ! If banks sent me the gauges I would install them ! They look killer! I am glad to see your taking your time with this build!
Right on point and great real world proof i remember a while back on video, at the time with the 3rd Gen. you mentioned your truck will let you know whats up with it if there is an issue long before a failure if your monitoring your vehicle and if you know your vehicle. And take care of it before it turns into a bigger issue if you were to ignore it or not realize it. Idk why but that's stuck with me and has helped me with maintaining my own truck. Thank you.
Thank you! are you still running the Idash if so are they worth the money? I broke my edge when the suction cup came off the windshield. @@EVERYTHANGDIESEL
before my trans tune and delete , my truck was always gear hunting at 30 mph it couldnt decide on a gear. now it is gone . the factory trans tune was a bit of a mess.
I am wondering about my compound turbo Cummins it has a 64.5 over 76mm it makes about 45 pounds of boost has head studs and 30 overs can it handle the boost with a stock bottom end
Good video Cam you’re doing all the mods that I want and will get done at some point. Love banks upgrades, yeah can you do a video on the fan clutch would like to it for future reference. Thanks again 👍🏻
Getting ready to delete my 2017 Cummins. I’m currently using an Edge with Attitude and will be losing my EGT sensor from Edge when I return my truck back to stock. Will be installing an EZ Lynk with GDP tunes. Did you add any after market sensors to monitor these parameters or are these stock? I also have a Banks Monster Ram Intake and Pedal Monster from Banks. I ended up calling Edge and they said you can’t use the Edge w/Attitude as a monitor.
Yes and no. I installed there tunes with 180psi before and once I installed the valve body I installed the new tunes with 225psi line pressure and its money!
Awesome video!! I did my 2nd gen swap last weekend. I love it. But they are sending me new files so the turbo stays lit!! Let me know if you know any that wants a factory HE351 with 44,000 miles. Keep the
I run this same setup on my cummins. Glad to hear the shout out to Eddie's Life!
My fan clutch seems to always be active even when start up. Not sure that's normal. Genos Garage is where it's at also. Clean install on the Banks.
Mine does the same thing
Cam, love banks idash, it is difficult to see all those little numbers . The cts2 works for me ! If banks sent me the gauges I would install them ! They look killer! I am glad to see your taking your time with this build!
Right on point and great real world proof i remember a while back on video, at the time with the 3rd Gen. you mentioned your truck will let you know whats up with it if there is an issue long before a failure if your monitoring your vehicle and if you know your vehicle. And take care of it before it turns into a bigger issue if you were to ignore it or not realize it. Idk why but that's stuck with me and has helped me with maintaining my own truck. Thank you.
Appreciate it man! It's a simple method to knowing if your truck is gonna fail haha works for me
Where did you get your gauge column? Banks only sells the single so I’m super interested in that.
I bought it from glowshift website
Thank you! are you still running the Idash if so are they worth the money? I broke my edge when the suction cup came off the windshield. @@EVERYTHANGDIESEL
Love the mods. Glad you’re going to the Banks stuff. I’m in the process of getting nearly an identical setup.
Whats the best year to buy a 6.7 cummins please thanks
before my trans tune and delete , my truck was always gear hunting at 30 mph it couldnt decide on a gear. now it is gone . the factory trans tune was a bit of a mess.
Facts bro! The trans tune from factory is shit
While installing tunes. Do you not have to put your truck on a 10amp battery charger?
No I don't. Unless the truck been sitting for a really long time u don't need to have it on a charger.
Love it man trucks getting sweeter every mod!
Do you have any old edge monitors you want to get rid of?
I am wondering about my compound turbo Cummins it has a 64.5 over 76mm it makes about 45 pounds of boost has head studs and 30 overs can it handle the boost with a stock bottom end
11 month's later! Do you still have your iDash?
Hey this runs great with a set of compounds too as always love the videos bro
Must try a Race me Canada tuner! I have the i dash and the tuner running off a splitter on my 21 H.O.
Great vid! Banks products are a great choice they really know what they are doing. Thanks for sharing
Do we need it if we have an EZ Lynk and an iPad?
Naw u don't.
Good video Cam you’re doing all the mods that I want and will get done at some point. Love banks upgrades, yeah can you do a video on the fan clutch would like to it for future reference. Thanks again 👍🏻
Love this build so far 🔥 🔥 🔥
We're can I get an egr delete kit the Walmart link stopped working
Google
Are you active duty still? & are you going to jack this truck up
Seems like a lot of stuff, on the run right now, I’ll take another look after a bit…. Thanks for the video buddy
who do you trust for tunes
Ccs tuning from dirtydieselcustom.ca link in description below
@@EVERYTHANGDIESEL thanks
Does this link include all 3 gauges and the pillar?
It'll take u do the website. Once u get there just select your vehicle and it will guide u through
Getting ready to delete my 2017 Cummins. I’m currently using an Edge with Attitude and will be losing my EGT sensor from Edge when I return my truck back to stock. Will be installing an EZ Lynk with GDP tunes. Did you add any after market sensors to monitor these parameters or are these stock? I also have a Banks Monster Ram Intake and Pedal Monster from Banks. I ended up calling Edge and they said you can’t use the Edge w/Attitude as a monitor.
Thats correct from edge, I haven't added any aftermarket sensors yet, I plan to add the banks fuel pressure sensor and egt probe in the near future
Awesome!! I`m with Dirty Diesel Customs also, but did you do the trans shift body before you download this tune?
Yes and no. I installed there tunes with 180psi before and once I installed the valve body I installed the new tunes with 225psi line pressure and its money!
Is it safe to instan that trans tune with the stock valve body.
No
Awesome video!! I did my 2nd gen swap last weekend. I love it. But they are sending me new files so the turbo stays lit!! Let me know if you know any that wants a factory HE351 with 44,000 miles. Keep the
How come you didn't go with the glowshift again?
Just wanted to switch up, I had no issues with my glow shifts before just want to show viewers a different perspective
@@EVERYTHANGDIESEL I get it! Cam I appreciate all the content you put out there. Keep it coming!!
Hell Yeah Brother 🇺🇸🦅
Let see you fight with that clutch or it works with you. Like fun you had with the other truck.
Nice setup man 👍🏻
Thank you 💪🏽
Love it, Bro.
Thank u!
What’s up dude !!
i trust geno garage, they dont sell garbage.