Oh man I hope your pup gets better soon, going through puppie issues as well. Mines had a sever fever. He’s way better now but man it was such a bad scare. Couldn’t sleep for 2 days. Got my order in today and can’t be any happier thank you 🙏
FD sounds awesome! And looks amazing! I know you can’t wait for power tuning! Subie is coming along sweet too! Always love the new stuff you are doing!
Ya, you should have used an STI rear subframe. Comes with the solid bushings too and proper R180 diff mount. Have a brake line shop make new hard lines for the 15 rack so it fits.
Love the rx7 pov drive. Idk why but i find it so funny driving a rx7 to a mazda dealership because its so different to what they sell now, so those who know what it is really know and the others are probably like "thats a mazda?" Lol
for the six speed you need the rear gd crossmember the 6 speed transmission crossmember which sits lower the the 5 speed if your not using it it's probely why your hitting the chassis (i assumed you where using all 6 speed stuff or I would of brought it up before) , a 6 speed drive shaft or automatic drive shaft. if using an 08+ trans you need the iwire kit to get speed readout. Look up The Six Speed Swap Thread. on rs25. I a 02 gd rear 20mm oem swaybar and oem bushings fits fine in the stock bracket. hope doggy is doing better
The only RS part I’m using is the rear crossmember. Some people say they have no issues. Others seem to have this issue. I’ve been told that a Carbon driveshaft fits without issue too. BUT I already powder coated and swapped all the bushings in the RS one so I kinda wanna stick with it 😅 But I did get an Auto driveshaft so I might swap that in with the R160 pinion flange
Poor mochi. My puppy loved to ride in my BRZ with the window down. Awesome progress on the cars 💪🏼🔥. Sending the puppy 🐶 good vibes and a speedy subi recovery.
Definitely care about mochi. And I'd suggest going to your local driveline shop, they can modify or build you one for faily cheap and fast. Some can even build you a single piece carbon one
I am sure someone has commented about this, but you needed to use a gd subframe in the back and all the GD rear diff and drive shaft stuff will bolt up..
I’m so excited cause after 7 months I’ll be back stateside eventually and be able to drive my subie!! Also I hope everything works out fine with your corgi and she’s all better soon
I BELIEVE you can get the driveshaft cut, extended and rebalanced, ask your local driveshaft shop, if you have one. Also Ive been telling people about getting their hardware zinc plated, its nice to use oem hardware that you dont have to worry if its actually the rating that is stamped on it with aftermarket hardware
Interesting watching this series and the differences between the 2.5RS and the JDM v4 STi Type R. I'm currently doing a similar restoration in Australia on my JDM imported 98 v4 STi Type R and it is factory R180.
Always excited to watch some gc content since it’s a relatable platform to my gd wrx that just sent all the rod bearings to the gulag since the td04 decided to eat all the oil in 3 days. It’s what makes a Subaru a Subaru
I’d also recommend finding the 85 rx turbo manual quick ratio steering rack out of all the subarus my 85 rx turbo I kept the stock rack I. It cuz it was the quick ratio rally steering rack. Manual steering. It feels so good driving and racing. And it fits in the gc8 for sure. Since I have a 04 sti cross member with the 85 steering rack in it
Hell yea man,always love to see more subie content,going up to a dealership tomo and looking at a '15 sti in dark gray metallic, red and black interior with only 78k miles. I will be doing a once over there and then having my subaru dealership next door to me,give it a solid once over as well. Heres hoping everything goes well!!
@@Smeedia As soon as I go up and hopefully get the keys,you already know im going to be taking a pic of the keys in my hand and of the interior and everything else as well
Also not gonna lie one bit. I had my headphones in and was listening to the rx7 like music to my ears cranked loud as f and loving it. Dreaming about getting my grandmas rx3 1978 back and fixing it. Man my grandma was a bad ass. Drove a 78 rotary and her plates said Rosie. Which was my grandmas name. My dad and uncle sold the 20k og car for 1000 bucks and the guy drove accross the country in 1 day to buy it. I was like you guys are idiots. Mint og rx3 for 900 bucks. The guy talked my dumb ass dad down 100 bucks, and probably laughed all the way home.
Get a PRS quick steering rack, the stock is just too slow! And, again, on the top hats. The fronts should be the GD. If installed correctly you can setup camber and caster.
Great news about Mochi that she should be ok. I was thinking you could get the missing part of your Momo wheel 3d printed if you have someone near by who can measure and re-design it maybe
Looking amazing brother 👍 got a set of rear alloy sti lateral arms delivered today, fitting them tomorrow , hopefully complement the alloy front control arms on the fozzy . I’m envious of your front subframe it’s epic . I’m a welder faber and have seriously thought of making one ! What’s the retail on one of those? . Little miss mo poor little doggo 🐶 corgi?
Amazing to watch progress and that fast. I guess doing THIS for a living makes the difference :) You are def. pushing me forward with my Type-R to get things done. Q: Are the RS fuel tank straps and GD tank straps same? To rephrase my question. Is the tank shape the same?
9:58 - can you bend your own hard lines for the rack? 🤔 I had the same issue with my rack on my mustang. One of the lines was rubbing the front sump of the oil pan. 💪
I'm in the middle of 6-speed swapping my LGT. Atleast with my conversion, I use either 4EAT drive shaft or Spec-B. I would assume if the 2.5rs came with a 4EAT in some models, you could use that. The 4EAT is the same size as the STi 6-speed.
5th gear 2800 rpm is almost 60. Sucks to do 55 because they don’t like it. Forcing you to go back to fourth gear being loud and obnoxious. But that’s ok because it’s Fd. You can always use Google maps app on your phone btw. It tells you your speed by satellite ;)
RX7 story from Japan, a 70+ year old lady had one, the eponymous "one little old lady owner" and I guess she must have put it on auction because it was Mazda Japan vs around 40 other bidders and Mazda won. Unfortunately none of the articles say what they paid.
Isn't there a place in California who build all kinds of 22b type subarus? Maybe they would know where to get those bushings, etc that are hard to find?
Hey man, at 1:25, is that the kartboy rear subframe lockout kit? Just as I thought it looked like it. If so, have you run in the past on any cars? What’s your opinion on them? Thanks from NZ!
You’re right, who cares what kind of build this is. It’s a build I’ve always wanted to do. Sorry to hear about your dog, fingers crossed all ok 🤞🏼💙🤙🏼
It’s a combination of em all 😂
We will not Skip, We also care about Mochi! Great build and also miss Mo feel better!
So far she’s pretty much back to her normal self 🥳
I had to rewatch the driving footage. That Brap sounds amazing on my headphones!
We all care about your lil pupper glad she’s doing better
You should be so proud all your builds have been absolutely amazing I freaking 😊
Thanks Kim! Super happy with the progress on all of them!
That RX-7 is fucking special and the 22b is going to be as well.
Been loving driving the 7 whenever I get the opportunity 🔥
The little things add up. I too get the return spring and steel clutch line
The steel clutch line IMO makes a decent difference 🤌
Oh man I hope your pup gets better soon, going through puppie issues as well. Mines had a sever fever. He’s way better now but man it was such a bad scare. Couldn’t sleep for 2 days. Got my order in today and can’t be any happier thank you 🙏
Hopefully the fever clears up soon and the opens back to normal again! Pet sicknesses are never fun 😭
Perfect timing! Here’s to a good weekend everyone 🎉
It’s the weekend once more 🥳
S in Smeedia stands for Subaru. I knew it.
It stands for SAWAIS
Hello from England. Great video as always, I’m glad your dog is making a good recovery 😊
FD sounds awesome! And looks amazing! I know you can’t wait for power tuning! Subie is coming along sweet too! Always love the new stuff you are doing!
Things an absolute riot to drive. The nostalgia from old cars is the best 🎉
The Subaru is coming along nicely 🙈
Ya, you should have used an STI rear subframe. Comes with the solid bushings too and proper R180 diff mount.
Have a brake line shop make new hard lines for the 15 rack so it fits.
so satisfying watching the car transform with each episode.
Bolt by bolt it gets closer 🤌
Love the rx7 pov drive. Idk why but i find it so funny driving a rx7 to a mazda dealership because its so different to what they sell now, so those who know what it is really know and the others are probably like "thats a mazda?" Lol
God is good brother. Glad she is getting better❤ looking forward to your 22B build🙌🏾🔥
It’s crazy how far you’ve come in 5yrs and how far I haven’t 😅😅
Puppers nooo nooo. My kitty is 16, so every day walking into the house from work is a question... cheers my man.
When they get old it’s always stressful 😭
Progress looks great. Glad your corgi is OK. Dogs are the best. So glad my 2 bullmastiff puppies aren't prone to many health issues
Killing the builds lately. Good job homie!
Thanks Justin! Stoaked with how they’re all coming out 🥳
for the six speed you need the rear gd crossmember the 6 speed transmission crossmember which sits lower the the 5 speed if your not using it it's probely why your hitting the chassis (i assumed you where using all 6 speed stuff or I would of brought it up before) , a 6 speed drive shaft or automatic drive shaft. if using an 08+ trans you need the iwire kit to get speed readout. Look up The Six Speed Swap Thread. on rs25. I a 02 gd rear 20mm oem swaybar and oem bushings fits fine in the stock bracket. hope doggy is doing better
The only RS part I’m using is the rear crossmember. Some people say they have no issues. Others seem to have this issue. I’ve been told that a Carbon driveshaft fits without issue too. BUT I already powder coated and swapped all the bushings in the RS one so I kinda wanna stick with it 😅
But I did get an Auto driveshaft so I might swap that in with the R160 pinion flange
14:48 i love that you said that, then released this on the last nice day it looks like we're gonna have for a while 😭😭
Nice to see the update man. Always enjoy seeing the shop doggos too
Poor mochi. My puppy loved to ride in my BRZ with the window down.
Awesome progress on the cars 💪🏼🔥.
Sending the puppy 🐶 good vibes and a speedy subi recovery.
I will pass the message to her 🎉 she thankfully is doing much better now!
FYI! The key code is stamped on one of the door lock Cylinder. That is if the ignition key is the same.
Rx7 sounds AMAZING! Twenty 2 BEE!!!
They 7 is an absolute unit to be driving 😍
i read "rolling antilag" and i cant describe the feeling of happiness that suddenly disappeared when i read the title
Definitely care about mochi. And I'd suggest going to your local driveline shop, they can modify or build you one for faily cheap and fast. Some can even build you a single piece carbon one
I am sure someone has commented about this, but you needed to use a gd subframe in the back and all the GD rear diff and drive shaft stuff will bolt up..
Don’t forget to anti seize the lateral link bolts if you didn’t! they seize up pretty fast in the pnw and it sucks if they do
I’m so excited cause after 7 months I’ll be back stateside eventually and be able to drive my subie!! Also I hope everything works out fine with your corgi and she’s all better soon
TSSFAB makes adjustable trailing arms, they’re mint👌
13:22 if anyone skips past the puppy info they are not human beings….. Doggos are a beautiful thing and they very quickly become part of any family.
I BELIEVE you can get the driveshaft cut, extended and rebalanced, ask your local driveshaft shop, if you have one. Also Ive been telling people about getting their hardware zinc plated, its nice to use oem hardware that you dont have to worry if its actually the rating that is stamped on it with aftermarket hardware
Interesting watching this series and the differences between the 2.5RS and the JDM v4 STi Type R. I'm currently doing a similar restoration in Australia on my JDM imported 98 v4 STi Type R and it is factory R180.
My 2.5 rs has a full sti swap r180 and stock gd sti driveshaft no problem there
Mooresport makes an adapter for the 2015+ rack, but it will require an lines. Rallysport and flat irons sell it
Always excited to watch some gc content since it’s a relatable platform to my gd wrx that just sent all the rod bearings to the gulag since the td04 decided to eat all the oil in 3 days. It’s what makes a Subaru a Subaru
The gulag is not a fun place to be 😢 any plans to get out of there?
@ found a used 205 from a buddy
Mooresport has a solution for the steering lines. You certainly can run that rack. I'm running one in my 2003 WRX
The issue is not the lines, it’s where the lines enter the rack. There is not enough room between the rack and subframe to get a fitting & line in it
Everything is looking great and the rx7 is looking and sounding awesome!!!
Stoaked with how the Subarus coming out 🎉 the 7 I try to find any excuse to drive that thing 😂
I’d also recommend finding the 85 rx turbo manual quick ratio steering rack out of all the subarus my 85 rx turbo I kept the stock rack I. It cuz it was the quick ratio rally steering rack. Manual steering. It feels so good driving and racing. And it fits in the gc8 for sure. Since I have a 04 sti cross member with the 85 steering rack in it
So nice seeing this build coming together piece by piece. Really excited to see the outcome of this! Great work, T👍🏽!
Bolt by bolts coming back together 🥳💪
FD is sounding so good.😮
FYI a gr subframe bolts in with Baja subframe bolts
Man, the turbo flutter on the FD.. woooo!
That thing makes so many good turbo noises 🤌
Hey mate a auto gd rear driveshaft will fit, i put it in my gc8 when I did a 6 mt swap earlier + happy to hear mochi is doing good
The 6 speed is the only Subaru swap that takes some serious re engineering on the older cars.
bro is the goat with recording and editing for daily uploads ❤
I’m like one every 3 days right now 😅😭
@ do you mind making a video about your recording equipment and editing process !? would be helpful!!!
Just got my rotary power shirt today,and yer rocking it! Huh. Subie coming along nicely 😊
Eyyy appreciate the support Brad 🥳
Just got a new 2015 steering rack for my sti like 1 month ago. 😊
Hell yea man,always love to see more subie content,going up to a dealership tomo and looking at a '15 sti in dark gray metallic, red and black interior with only 78k miles. I will be doing a once over there and then having my subaru dealership next door to me,give it a solid once over as well. Heres hoping everything goes well!!
Fingers crossed for ya that everything checks out right 🥳 lemme know what you find!
@@Smeedia As soon as I go up and hopefully get the keys,you already know im going to be taking a pic of the keys in my hand and of the interior and everything else as well
Can’t wait till this thing is running 🏎️💨 keep up the great work
Edit: still wish you would of went through with the 2JZ STI build 😈
Things going to be an absolute UNIT
Rear engine set up going to be killer in comparison 😈
Id go with the GD sti subframe because of the rear diff mounting style.
I’ve already powder coated and replaced all the bushings in that subframe, I’m using it 😂😅
Also not gonna lie one bit. I had my headphones in and was listening to the rx7 like music to my ears cranked loud as f and loving it. Dreaming about getting my grandmas rx3 1978 back and fixing it. Man my grandma was a bad ass. Drove a 78 rotary and her plates said Rosie. Which was my grandmas name. My dad and uncle sold the 20k og car for 1000 bucks and the guy drove accross the country in 1 day to buy it. I was like you guys are idiots. Mint og rx3 for 900 bucks. The guy talked my dumb ass dad down 100 bucks, and probably laughed all the way home.
Legit just left a night of Top Golf and I get to watch this on the way home
Hit any home runs?
@ one singular good hit with a driver. Then I said, “that’s my only good hit for the night” and I was correct
@@aynun1647lol top golf be like that sometimes 😅
Get a PRS quick steering rack, the stock is just too slow!
And, again, on the top hats. The fronts should be the GD. If installed correctly you can setup camber and caster.
Great news about Mochi that she should be ok.
I was thinking you could get the missing part of your Momo wheel 3d printed if you have someone near by who can measure and re-design it maybe
Soon enough you’ll have two run projects. 💪💪
Right?! Glory be the days when more than one works 😂😅
What camera do you use for your POV driving? Also love how this build is coming along and eager to see the final result 🤙🏼
I’ve done the same swap but I used a GD rear subframe and didn’t remember running into any issues
i must've missed a lot of episodes of dragon ball smeed, didn't know the fd was up and drivable
Finally Got it driving in the last video a few days ago 🥳
My new TGIF
Happy Friday!
For the interim you can get a phone mount and download a speedometer app for when you drive the RX-7. We don’t need the homie in jail 😂.
Looking amazing brother 👍 got a set of rear alloy sti lateral arms delivered today, fitting them tomorrow , hopefully complement the alloy front control arms on the fozzy . I’m envious of your front subframe it’s epic . I’m a welder faber and have seriously thought of making one ! What’s the retail on one of those? . Little miss mo poor little doggo 🐶 corgi?
Thankfully the corg is doing better now 🥳 I believe it was $2,200. Definitely a spending piece but a cool unit in itself!
@@Smeediaallot of 💰
You finally got some speaker adaptor spacers, I was talking about that like 3 months ago... and you still thought the circles were 6x9 lol.
Man math is hard 😂
@@Smeedia It's not even math though! Six inches by Nine inches, that's no circle, it's an oval.
Seeing that box of bolts sent my anxiety through the roof and it’s not even my build.
i too had also discovered the speaker issue, ( i had to replace a broken window) lmao
It broke the window?! 🥲
Probably best to go with a custom built, carbon fiber, driveshaft that bolts right in with your current set up.
Why didnt you just use a GDB rear subrame? Its a 10x better subframe over the GC era one.
I was told the GC one would work no problem so I just kept it and completely refinished it 😂
Amazing to watch progress and that fast. I guess doing THIS for a living makes the difference :) You are def. pushing me forward with my Type-R to get things done.
Q: Are the RS fuel tank straps and GD tank straps same? To rephrase my question. Is the tank shape the same?
9:58 - can you bend your own hard lines for the rack? 🤔 I had the same issue with my rack on my mustang. One of the lines was rubbing the front sump of the oil pan. 💪
I would but where the fittings come out of the rack is right where the front subframe is. They no fit
@@Smeedia dang bro. You'll get it 💪
Tanner get some Plastruct PPC-2 for your 3d printed PLA parts. Gives it a better finish and bonds the PLA better.
I’ll look into it and get some ordered. Never heard of it before so I’ll check it out 🫡
@@Smeedia ask the guy that 3D printed you stuff about it
@@RadDadisRad I try to avoid using PLA for anything on cars to begin with.
These were printed using PETG
@@CFISH189do you do any post process finishing? I use PPC-2 to improve surface finish and the layer adhesion.
I'm in the middle of 6-speed swapping my LGT. Atleast with my conversion, I use either 4EAT drive shaft or Spec-B. I would assume if the 2.5rs came with a 4EAT in some models, you could use that. The 4EAT is the same size as the STi 6-speed.
Just gotta match up the flange on the rear diff to the driveshaft or vice-versa
9:05 Yes; the little devit needs to point to the ground (for other viewers. I know you know this stuff already Smeedia)
Instead of swapping drive shaft and pinion what about making an aluminum or steel spacer to make up the difference between the drive shaft and pinion?
Carlos bernal aka bugzilla ate it good chief!!! Matisse 🎉
Who?!
Do you think you would try fitting a FA24 in and see if that would give you more potential?
Get some of the pink STI trailing arms
Remember that it still dose not have the motor so I think that the transmission is in an incline leading it to be short by little
5th gear 2800 rpm is almost 60. Sucks to do 55 because they don’t like it. Forcing you to go back to fourth gear being loud and obnoxious. But that’s ok because it’s Fd. You can always use Google maps app on your phone btw. It tells you your speed by satellite ;)
*LET’S GO TANNER!!!* *_LET’S GO MOCHI!!!_*
🥳🥳🥳🥳
Yeah!!! New content!
🥳🥳🥳
RX7 story from Japan, a 70+ year old lady had one, the eponymous "one little old lady owner" and I guess she must have put it on auction because it was Mazda Japan vs around 40 other bidders and Mazda won. Unfortunately none of the articles say what they paid.
When does the rx7 go on the dyno? Dying to see those numbers!
If you film it they will watch.
Isn't there a place in California who build all kinds of 22b type subarus? Maybe they would know where to get those bushings, etc that are hard to find?
Engine reveal when? Also glad lil miss mo is doing well. Cheers 🍻
Which engine? 👀
Love the RX-7
I recently saw a corgi german shepherd mix and a corgi golden retriever mix. Both looked like midgets of the secondary breed. Hilarious.
I wanna see a husky corgi, they look like little huskies 😅
Poor Mo ❤
She doing better now 🎉
Rx7 🎉
Things a blast 🥳
what is matt's fav upgrade to mittens? asking because I have basically the same car
I suppose snow will be coming soon enough.
We mainly just get rain, rarely do we get snow 😅
Doesn't mooresport sell a conversion for the hard lines? Converts them to AN? That may allow the 15 rack to fit
Looking into this now.
The issue is the lines are right up
On the subframe so I’m not sure if it would even clear it
chase bays also has a conversion to an kit.
Wait no sick tubular rear sub frame?
Wasn’t in the budget 😅
I never heard of the brand, (New) before...
Where can we get the (new) brand from?
ha, ha. ✌🤙🤣
It’s the best brand didn’t ya know 😂😅
6:32 Where can I buy the blocks you used to stabilize everything for your hydraulic press
Hey man, at 1:25, is that the kartboy rear subframe lockout kit? Just as I thought it looked like it.
If so, have you run in the past on any cars? What’s your opinion on them?
Thanks from NZ!
More pov drive please 😁
Will do 🫡
Any spacer for the shaft will work?
We could probably make one but if we don’t have to run a spacer that would be ideal 👌