That works well with the original vent pipe flashing's rubber boot is high so that water running from the roof will run into the dry rotted boot opening to the vent pipe. In my instance, I have a low vent pipe flashing with a boot that has broken down by weather/time. Putting one of these perma boot will not make it water tight with run off water going under the cover and running into the low "dam" to the boot. So in my case, the bottom shell needs to be sealed. Any other solutions for vent pipe flashing that has a low profile boot?
Using this on a new roof would prevent the sun damage to a roof boot. However, using this on an old roof where the roof boot is cracked and dry isn't going to work.
only if your original vent pipe flashing is low profiled. In this video the vent pipe flashing and boot is about 3 inches high and with the cover over this even with water passing through underneath the cover will not go into the defective boot.
Home Depot and Lowe's should have it stocked in store depending on where you're located. Roofing supply houses can get them as well, but easiest method is online at Home Depot or Lowe's.
You don't say how long pipe has to be.
Pipe may be too long and have to cut.
What keeps the wind from blowing it off
That works well with the original vent pipe flashing's rubber boot is high so that water running from the roof will run into the dry rotted boot opening to the vent pipe. In my instance, I have a low vent pipe flashing with a boot that has broken down by weather/time. Putting one of these perma boot will not make it water tight with run off water going under the cover and running into the low "dam" to the boot. So in my case, the bottom shell needs to be sealed. Any other solutions for vent pipe flashing that has a low profile boot?
Using this on a new roof would prevent the sun damage to a roof boot. However, using this on an old roof where the roof boot is cracked and dry isn't going to work.
ive been on about 10,000 roofs i have never seen a broken pipe boot unless a branch or something massive hit it.
Hola maestro una pregunta cuanto se cobra solo para poner esa tapa gracias espero su respuesta .soy un nuevo suscriptor.saludos
I have one pipe 2 1/2 diameter and one 3 1/2...what sizes should I get to fit those???
Not Quite for the 3 1/2 I would contact permaboot directly.
Can I use it on a 4 inch tube?
I saw some videos where they put a roof caulk around the seams of the top and where it meets the roof. Is this needed if we are experiencing a leak?
Its best to use calking on any shingle repairs.
Thanks for watching!
only if your original vent pipe flashing is low profiled. In this video the vent pipe flashing and boot is about 3 inches high and with the cover over this even with water passing through underneath the cover will not go into the defective boot.
Where can I find this item?
Home Depot and Lowe's should have it stocked in store depending on where you're located. Roofing supply houses can get them as well, but easiest method is online at Home Depot or Lowe's.
Home depot is where we pick up most of our Permaboots