Really he is good either way whether it's kseries or gsr motor but if he wants to make more power easier k swap is the way to go not to mention the added torque and it is a stronger platform he could have 500hp stock k20 or k24 with turbo easy I think ruddy would love it as well
@@hoondagang4919 with the engine being that much I'm sure it's probably built pretty good and if he gets some sponsored parts building that car would be really easy and done pretty quick.
You should hit up Zosh ! He gets his car tuned there he’s done a b20 vtec on boost before he knows the struggles of them blowing up lol he’s a good TH-camr very cool and humble !
@@MediocreTCG glad to hear it! I'm not shitting you here but look up this lady "takingcarababies" on Instagram. Her sleep training techniques got our 4 month old sleeping 12-13 hours a night. He's almost one now and still sleeps like a champ. At 4 months they drop a nap and it seriously messes up their night schedule. This lady helps you fix it and give them a solid routine Have a good one!
That's a s300 v1 hondata, they die because the nvram battery goes out(they're over 10 years old), you gotta replace the Dallas NVRam which is the little black part with the hondata sticker inside the ecu(they sell them on eBay) and get it replaced by someone you know that knows how to solder and you're good to go!
After my first full day of wakeboarding behind a boat my arms, shoulders, core.. basically every single muscle group was in SO much pain. It works a lot of your body.
Chris common rule of thumb for injectors is 1cc = 1hp meaning 270cc injectors are MAX'd at 270hp (any probably before that tbr) and e85 is 40% less. stock SR20's commonly dyno between 220-255 and they use a t25 and 370cc injectors for reference.
b20bs start to have issues at around 300+hp (Like 12 psi or so??) because of their thinner cylinder sleeves, they're really just a b18 bored out to a b20, b18b1s can handle a safe 400+ if I'm not mistaken.
I get the injectors were the limiting factor here, but if that tuner doesn't think you can safely make 300 on a stock b20, get a new tuner asap. On boost alone I make 317 to the wheels, with spray I make 388. I've been on this setup just over 2 years without a single issue.
Haven't looked into k swaps for crx's in a while, but I know they had clearance issues for the hood when people first started swapping in k series . So it may not be as clean as a build as you want.
Check out huntertuneds older red b20v hatch videos. Center 2 cylinders crack sleeves zosh has been down the same road. Like sammit says keep it around 10Psi so you can keep it around for awhile. I love the b20s but the sleeve walls are alot thinner than b18, b16. The head and cams doesnt flow as well up top as the vtec. K series crx mate!
The best thing you’ve done so far actually found a legit dyno spot for the civics and a nice k20 for the crx definetly buy that swap and drop the Gsr in the ricer civic , even that type R was fire good finds
I have a completely stock b20b with an Ebay turbo, just 8 psi off of wastegate, on a "safe" chip tune. She rips m8! My butt dyno reads like 230 hp more or less..
I really wanna get into the turbo Honda game, $3800 doesn’t seem too bad for what I’m guessing is an engine built for boost already assembled. I spent about $4300 just for a built transmission.
Why do people keep thinking e85 can just make you more power? If the limit is already your injectors, fuel lines, or pump, e85 will only make things worse because it requires a minimum 30% more flow.
U should put the Da integra seats in the ek cause the stock ek seats r a death trap. If u crash with them they will not hold u in the seat and the recliner had been known fail.
5:36 I went to that corner store when I vacationed in Pompano a couple years ago :). Poor Sammit needs a day off to rest, overworking your guests man!! Just kidding, the videos are awesome man.
Your body’s full tight when your on the board I wake board and kneeboard you can’t have your body tight and like the muscles doing everything you gotta just be calm and like instead of having ya arm and legs full pushed out so there tight have them in a little with a bit of movement it will help you as your so tight and as you try somthing you fall
Those new injectors will be capable of about 350whp. But sorry man its true, b20s will make 270wheel max without the block grenading. But even 250whp in that thing will gap marcus pretty hard for sure!
Stock b20s can make 300hp, my buddy had a b20b on 13psi pushing 310hp, only thing done to the block was a block guard, he had fic 1000cc injectors and tuned on e85
omg dude i want to see that thing rage on the dyno!! i hope you get to tune it in tomorrows video!! we have been waiting man!! problem after problem lol!!
![ร้อยพ่อพันแม่ - WanMai [Official MV]](http://i.ytimg.com/vi/XY2pNYASEbg/mqdefault.jpg)
You gave me coronavirus. RIP. PRAY FOR ME 💀 I’m fixing your Sur Ron.
nooooooooo
What happened to the surron I'm quite technical so hit me
Rest up big homie
When he said you wasnt feeling well I was hoping you didn't get the Corona V get well Jack
Get well brother
I personally love the idea of a fresh kswap going into that crx it deserves nothing but the best with all the work you put into it already
justin loveless 100% agree
Yes just wait until it comes to time to put it in pretty sure crx and k swaps have clearance issues with the hood and needing to cut it.
Yes put the k swap in the crx that would be the best motor to put in it and it will be sick
SAVAGE D EDGE lmaoo he has a hard enough time with basic honda stuff.
Really he is good either way whether it's kseries or gsr motor but if he wants to make more power easier k swap is the way to go not to mention the added torque and it is a stronger platform he could have 500hp stock k20 or k24 with turbo easy I think ruddy would love it as well
It’s a engine
@@sogmclovin2394 it's either an engine or a motot
When I saw the title rodknock curse I thought u blew the motor already lol
Same!
me too
Terry Holley I’m just like smh already lol
Wouldnt shock me if he does 300 wheel is pushing the baby walls of that b20 if it was a b18 hed be fine with 0 worry
Striking Hunter let’s see if he does make 300
That K series is perfect for the CRX. If you don't grab it you will regret it.
@@hoondagang4919 with the engine being that much I'm sure it's probably built pretty good and if he gets some sponsored parts building that car would be really easy and done pretty quick.
K swaps are so boring
That engine setup for the CRX would be sick 😍
You should hit up Zosh ! He gets his car tuned there he’s done a b20 vtec on boost before he knows the struggles of them blowing up lol he’s a good TH-camr very cool and humble !
Days without injuring Marcus: 17
Benjamin Franklin how’s the little guy doing homie?
@@Donkzra Lady*
But she's doing good. She's in the general baby routine now. Eat, sleep, shit, repeat.
I'm finally getting to sleep semi normally.
@@MediocreTCG glad to hear it! I'm not shitting you here but look up this lady "takingcarababies" on Instagram. Her sleep training techniques got our 4 month old sleeping 12-13 hours a night. He's almost one now and still sleeps like a champ. At 4 months they drop a nap and it seriously messes up their night schedule. This lady helps you fix it and give them a solid routine
Have a good one!
@@DeejayPozE holy crap. Thanks dude!
@@MediocreTCG fashow man. Changed my life lol
That's a s300 v1 hondata, they die because the nvram battery goes out(they're over 10 years old), you gotta replace the Dallas NVRam which is the little black part with the hondata sticker inside the ecu(they sell them on eBay) and get it replaced by someone you know that knows how to solder and you're good to go!
Days commenting put a hood dump on the civic: 2
Mason yeah it would look so much better😂
Don't you get more exhaust through the windows that way?
FroztiProductions who cares not like it’s got interior in anyways
@@4.8sierra59 Interior? So what? But that reminds me, no AC so they have to keep the windows down, soo...
Kswap and turbo the crx since you going to do it really nice may aswell go all out
Man, the ricer civic has corona. Rest easy 🥺
"I've never been on aFWD dyno Before"
Get the k-series bro!! I have one and love it!! Would love to see a k build!
he will end up with another 40K shop queen and no track car haha
After my first full day of wakeboarding behind a boat my arms, shoulders, core.. basically every single muscle group was in SO much pain. It works a lot of your body.
"Answers that will lead us to success" Rudy quote of the year!!!!!!!!!!!
That’s what happens when you don’t go to the master of tuning, jack.
Chris common rule of thumb for injectors is 1cc = 1hp meaning 270cc injectors are MAX'd at 270hp (any probably before that tbr) and e85 is 40% less. stock SR20's commonly dyno between 220-255 and they use a t25 and 370cc injectors for reference.
b20bs start to have issues at around 300+hp (Like 12 psi or so??) because of their thinner cylinder sleeves, they're really just a b18 bored out to a b20, b18b1s can handle a safe 400+ if I'm not mistaken.
I feel like your cheating on jack by him not tuning your car, it feels dirty & wrong.
Ya but for the best dont think jack has the tools to tune it without the hondata.
Jack couldn’t tune it that day
Jack doesnt have a license to tune with Neptune. Doubt he has an ostrich burner and the emulator.
Did you read his comment? He said he's got the coronavirus. Hope he was joking...
I get the injectors were the limiting factor here, but if that tuner doesn't think you can safely make 300 on a stock b20, get a new tuner asap. On boost alone I make 317 to the wheels, with spray I make 388. I've been on this setup just over 2 years without a single issue.
Buy that K Setup for the crx or you’ll regret it. It would be worth it for a nice engine since you have so much time in making that thing a beauty.
Haven't looked into k swaps for crx's in a while, but I know they had clearance issues for the hood when people first started swapping in k series . So it may not be as clean as a build as you want.
Holy fuck ending on the slow mo Sammit laugh was fucking priceless 🤣🤣😭😭😭😭💯
You’re a gangster if you do an h series crx h22!
1:37 yoo don't just leave the nozzle hanging wtf sketchy lol
Man I miss living out in Pompano Beach. Loved it out there
That K swap in the crx is the move. Do it right the first time and have a back up motor for river civic
Im calling it now that b20 cylinder walls last 2 weeks max depending on how much you drive, The b20 cylinder walls are thinner and tend to crack
Far out boys uploading at the exact same time now I gotta pick who to watch first 😂😂 all love to sammit and Chris love the vids ❤️
Zosh's tuner nicee
ruddy a little happy feet with the throttle LOLOLOL
You’re every tuners worsts nightmare. Shows up to the dyno so unprepared lol
I fukin love the way u pull outta the garage in the beginning lmfaoooo
YESS!!!
I was hoping, you’d K-swap something! But honestly ruddy, you should still show your ricer civic love dude, it’s been a loyal car.
Isnt that the place where zosh’s teggy flew off the dyno? 😂😂😂
Yo facts lol
Yes I think you’re correct 😂😂
Kuso On.6s it is 🤣
KBros what up bro. I started watching your videos because percy lmao keep doing you 💪🏽
Check out huntertuneds older red b20v hatch videos. Center 2 cylinders crack sleeves zosh has been down the same road. Like sammit says keep it around 10Psi so you can keep it around for awhile. I love the b20s but the sleeve walls are alot thinner than b18, b16. The head and cams doesnt flow as well up top as the vtec. K series crx mate!
dude I can't wait to see the power comparisons between dynos.
Wheel spin warmup followed by some foreshadowing
K-series in the CRX 😩
The best thing you’ve done so far actually found a legit dyno spot for the civics and a nice k20 for the crx definetly buy that swap and drop the Gsr in the ricer civic , even that type R was fire good finds
Sammy and ruddy best TH-cam bromance
K swap = Yes! PFI and Boosted Boiz will be in Florida for Cleetus. Brent will make the Civic get some Jam!
I have a completely stock b20b with an Ebay turbo, just 8 psi off of wastegate, on a "safe" chip tune. She rips m8! My butt dyno reads like 230 hp more or less..
you need to know if your ECU can handle high or low resistance injectors. Thats important because you can burn your ECU....
I cryied when u hit the water bro I'm sorry but that was funny as hell but I'm glad ur okay bro
Let’s see a junk car challenge while Sammy is in town 😬👌🏼
I really wanna get into the turbo Honda game, $3800 doesn’t seem too bad for what I’m guessing is an engine built for boost already assembled. I spent about $4300 just for a built transmission.
Vitara turbo D
Why do people keep thinking e85 can just make you more power? If the limit is already your injectors, fuel lines, or pump, e85 will only make things worse because it requires a minimum 30% more flow.
Just got 4 weeks off school guess what im going to be using as entertainment for the next few weeks
if you run 10 psi you're looking at around 250-260whp on a stock motor and tires might make a difference too
The fall looked funny right after he said again but damn that sucks.
one thing about waterboarding, you gotta have tight swim shorts or your ass is gonna be hanging out LOL
Damm. Thought it really had rodknock lol. Took me a second
Dammit rodknock 😂 made me feel stupid towards the end of the video
Couldn't help but noticing the Jamaican flag in tht shop... Yaad man ting,
The built fresh K series would be mint in the CRX!
I guess that's why he said "I've never seen those injectors before" lol cause they are way too small.
Hey e85 works fine in stock fuel system on civics. Methanol would eat it. Put that kswap in crx.
All I did was “shake my damn head” literally threw out this whole video 😂
U should put the Da integra seats in the ek cause the stock ek seats r a death trap. If u crash with them they will not hold u in the seat and the recliner had been known fail.
5:36 I went to that corner store when I vacationed in Pompano a couple years ago :). Poor Sammit needs a day off to rest, overworking your guests man!! Just kidding, the videos are awesome man.
K SWAP THE CRX DEFINITELY. Itll be exactly like boostedboi Kyle’s ef wago. Youll be making 600hp COMPLETELY STOCK. And youre gonna love it for sure.
Your body’s full tight when your on the board I wake board and kneeboard you can’t have your body tight and like the muscles doing everything you gotta just be calm and like instead of having ya arm and legs full pushed out so there tight have them in a little with a bit of movement it will help you as your so tight and as you try somthing you fall
☠ Reverse of shame ☠
Those new injectors will be capable of about 350whp. But sorry man its true, b20s will make 270wheel max without the block grenading. But even 250whp in that thing will gap marcus pretty hard for sure!
I called it!! Haha never count out the rodknock luck
we're is Cortny?
Dude no way this is genesis automotive in pompano I got my k swapped eg hatch tuned on that dyno!!!!! Let’s collab your local!
Isnt this the same guy that tuned @ zosh acura
Stock b20s can make 300hp, my buddy had a b20b on 13psi pushing 310hp, only thing done to the block was a block guard, he had fic 1000cc injectors and tuned on e85
Runs like a glove dood
Yes! K24 with a turbo for CRX!!
“never been on a fwd dyno before” what in the actual f does that even mean they spin both ways...ruddy come on
Sammit should be the one to polish marcus’s head.
With his tongue.
i would put the 1000cc in it 550 seems a little to small for e85
He will do the 550's and then go "they focked me dood". He needs to just do the 1000's. SMH
Well the crx is getting dropped anyway so might as well throw a new engine if it’s gonna be the “show car” (something could change 😂😂)
k swap in crx would be dope but keep it N/a other wise you will fight for alot of space for a turbo
Turbo k series we want it! You got the money so do it for us hahahhaha
a turbo’d k is gonna kinda throw off the balance of the crx might be a lil too much for an all around car
yes, yes , yes , yes, yessssss K swapped CRX!!! yesss genius rudnick. genius!
Chris save the bseries for the ricer civic and put that kswap in the track crx!! Do some merch to fund it we want to see it happen!!
Rudnick, keep the handle closer to your hips it'll change everything with the way you wakeboard.
those motors are clean as fuck they got some good stuff there
K swap the crx and make it a super clean/fast street car.
If you are going to swap the crx, please, please keep it legit and clean.
No ricer crx.
omg dude i want to see that thing rage on the dyno!! i hope you get to tune it in tomorrows video!! we have been waiting man!! problem after problem lol!!
Me and gsr_eg6 had a buddy making 310whp, and then dudes brother also had a b20, with nothing but a block gaurd aswell, making over 350 wheel
maybe its not a curse , maybe... just maybe cars dont like to be redlined with no load on cold start
You'd be better off with an FMU Rudnick. Good luck boys
Show us the engine Block Chris !!! for the engine code. Cough cough B18b1 lol
Sammit will never be able to leave the usa at this rate..
That RODCOK luck
18o face plant. Very niice. 👌🏻
turbo k swapped crx would be fucking dope
Poor Sammit is just dying lol
I just came from sammit
I wouldn’t do a turbo k24, I would do an N/A setup
We have a 97 ek hatch running 495 on the same motor
You went to the wrong person guy.. jack would have saved that bucket