Chinese scooter carburetor clean (Live 🔴)
ฝัง
- เผยแพร่เมื่อ 22 ต.ค. 2024
- BE SURE TO SUBSCRIBE TO OUR CHANNEL!!!!!
www.rollingwrenchdenver.com
Email:
rollingwrenchdenver@gmail.com
facebook:
/ rolling-wrench-denver-...
Instagram:
www.pictastar.c...
Twitter: / 767982294258900992
Blog:
www.rollingwre...
For chinese scooter repair:
www.chinesescooterrepair.com
ATV Parts:
www.plowdepot.com
This has to be one of the first videos, your setup has changed a lot since then!
Hey. Its not boring. its informative. I have some questions about starting a 4tempi fly vespa. I cant tell if its electrical. Dont quit what you are doing. Thanks Angie.
Not boring at all. I'm gonna clean my carb tonight in preparation for the new main jet coming in the mail. This is (hopefully) the last piece I need to do before my BBK rebuild is complete. Thanks for the content!
This video helped me get the kids go cart running better than anything else I watched. Thanks!
Sweeet! Thanks for the support 🙏
So helpful..I'm in vermont where it has to sit for months cause of snow..I wish It didnt cause I'd ride all day every day..I'm kida obsessed. Used to ride big bikes and got hurt so my foot cant shift a big bike.so I'm bound to scootervill for now ..so fun tho.. so I bet I'll have to do this in the spring
What a great insightful video.....bravo sir!
Thoroughly enjoyed watching & learning.
Thank you.😉🙌
no no no not boring, very informative
This is a great vidio I got a dongfang and this is helpful. I've never been a mechanic type guy but I think I got this with the scooter..thanx bro
I'm planning on getting a scooter stumbled on to your video, very informative, you really know your stuff. I saved and downloaded your video just in case I need a reference guide tutorial,, really great thank you
Not boring, nice to see a master at work. Looking forward to future videos with you using a tripod with articulating arm, so you can work with both hands!
Thank you 🙏 this was my first youtube live video. I will definitely do better in the future
maybe keep a glock in your toolbox
Good job with 1 hand 🖐 I learned a lot on how to clean my carb on my Gator 150cc motor Scooter 🛵 thanks for the video 📹
This video really helped me out thanks allot buddy🤘🏾
Next live you gotta remember the tripod.
I did like the content and seeing scooter work in real time. Good explorations and content (except camera work,lol). This video prompted me to subscribe. I have a 50cc Chinese scooter (139qmb) and troubleshooting vids would be appreciated.
Good job, keep up the Good work.
Yr doing a great job 👏
Good job bro, I'm going to give you a little tip on how to keep those battery nuts in place so it is easy to tighten them down. Just cut a small piece of fuel line about 1/4 inch or so, and stick it underneath the nut to hold it in place. Then when you have to remove the battery again they will stay in place until you have to re-install the battery. Trust me on this one.
Thanks you ! I actually already use that tip :-) but it’s good for everyone else to see it
@@RollingWrench I just drove 90 miles to go buy a 2009 Kymco Sting 50cc 2 stroke. I bought it for 200 dollars not running . It has 1,500 miles on it. I checked it for compression and spark, and it has both. I got it running with 1 hour after i got home. Man, what a awesome scooter ( 2 - Stroke ). Now me being the kinda guy that don't like running stock crap, i did some window ports on the piston and some cylinder porting, milled the head 20 thous. re cut the squish dome on the head. I cut the stock silencer off and welded one of my old Suzuki RM-125 silencers back on it. This scooter flat out rips. It buries the speedo at 50 and most likely is doing close to 60mph. I will take some video of it in action and send it to you. Do you by chance have any tips on these Kymco 50cc 2 strokes.....2 heads are always better then one. ( I used to be Jeff "Chicken " Matiasevich personal mechanic back in 89-93. You may have heard of him...if not just google his name. I also used to race motocross and was no slouch. I think there may be some videos of me on you tube. But i would like to pick your brain on these scooters if you don't mind? My younger brother Tommy the Bomber Bonacci is also a 6 time pro world champion jet ski racer. I build all his motors. He owns Bomber Eyewear ( floating sun and safety glasses.) . Shoot me your address and i will send you a couple pairs of safety and sunglasses no charge ( it is my gift to you ) I also do motorcycle and jet ski mobile repair on the side....so we have a lot of the skills that we like to share with others. If you want to give me a call 714 724-4080 Johnny or just e-mail me. Bonacci151@gmail.com
I am most impressed with that tool box.
Real time video, real experience with all issues lol
True story
Hey rollingwrenchdenver you have great an awesome teaching videos i have been having a problem with my Eagle 150cc chinese scooter 2008 I have installed a brand new motor and everything works and runs fine but I noticed I didn't have any headlights and taillights no lights with the new stator in the motor so I replaced the stator with the old one and lights are back on its the same stator old and new but the new stator doesn't give me lights any suggestions I also noticed on the old stator the green wire was cut by the previous owner near the plug and taken out? Any suggestions would be appreciative!
Very helpful...thank u tons...
ah stop boys Jesus, give the man a break he is trying his best godbless him😋😋😋😋😋😋
No this is great...it is showing me how to fix mine
You the best GY6 👷
I never let it sit. Nice video.
actually no, it isn't boring to me, because i bought a non-running yamaha vino125 two years ago, it hadn't run in four years. Hubby & i cleaned the carb, got a new battery, changed the oil, put a new back tire on it, checked the brake fluid on it, ect....but the carb fell apart & wouldn't work right, so we ended up having to buy a new carb, but it didn't cost that much really/60/70 dollars i think & presto chango, it ran & it's been running ever since !!!! (oh, he also cleaned the gas tank & got all the rust out of it, we tried to buy a new gas tank that was for a 50cc, but it wouldn't fit, so we soaked it in vinegar overnight & then once it was cleaned & dried, he sealed the gas tank, he also used a wire brush on the gas tank/he had to improvise)...ty for the video !! (p.s. he did clean both jets, but it wouldn't still run)we also used 'sea foam' too, it didn't work either
Can you do a video building a stretched version of that scooter? Fatty wheel and everything...
not boring just educational
Super helpful
Hey! I need one of those drain pans.
Any links?
Does the pilot jet hole have to be smaller than the main jet hole?
No is a very good video
Not gna take the weed bro.might be full..I woulda jst saying
This video was great! Very interesting to see attempted live. Coming from a new youtuber I found your channel 10 minutes ago and I’ve already watched a lot of your videos and best believe I’m taking notes. Definitely a Sub from me!
Thanks for watching and the support 🙏
hey, after changing the card in my scooter it worked for a few days and now when I start it it takes a little time to get going. It seems it wont take gas ? any ideas ?
just missed live
very good I got some problem my guy 150 I learning from u
Hello my HYOSUNG
scooter 2005 working but not moving there is motor sound but not moving can I know why ? thnx
Dont worry about the people
Same with my gy6 hard to start
Do u know the difference between a 2 stroke carb frm the 4 stroke carb? If there is one???
Yes, a 2 stoke carb will never have a diaphragm.
Hey brother i have a kymco agility 50cc. I NEED ONE OF THOSE pilot jets ..mine is so clogged i can't get it clean. How much would I sell it to me for my brother?
Heat the jet up with a torch. Burn it out. Be careful not to melt the jet though
very thorough thku
You need a head mounted camera mount do you can have both hands free!!
I have a scooter issue when it shows me doing 35 I'm doing 29 miles an hour and I'm also having electrical issues in starting issues I don't know what's wrong can you help me rebuild the engine make it a lot faster it's a 50cc classified as a 49.9 CC
It's a tao tao 50
And the brakes don't work only the clutch activate as a break
I think you should be more prepared.but tku basic info is still good.keep going
You need come to Nashville
Jesse Fults I love Nashville!
If I remember correctly you went through all this couple years later when you went big decided to stop
🔥🙌🏻🔥
Can u do a video on a fuel petcock
I already did. Search it in my library
you know Ive seen a lot of videos that have a camera man/woman with 2 arms I assume that didn't do half the job shooting as you just did with one and while fixing a scooter at the same time.
Thanks 🙏
I sure wish the inside of the actual carburetor looked like the thumbnail that was presented to get everybody to click in the first place. The actual carburetor was pretty clean to begin with. You get 2 out of 5 stars because of thumbnail deception lol
Ahh! Ya, You have to have a great thumbnail to get attention on TH-cam now days.
🔥🖤🔥
WEAR YOU GET YOUR PARST FROM LET ME KNOW THANK
If your learning it can't be boring 😴
I am having the same problem with my scooter
I HAVE A SCOOTER PARKED THAT WILL NOT START 250CC
also you need a helmet cam
Nope not boring
Headmount for go pro
Great idea!
Put some sea foam in it and run it it will clean it out
Not in a chinese scooter 😬. It will eat all the rubber diaphragms
Next time bring your wife with you, she can hold the camera for you. Good job.
We don’t do mobile repair anymore. Any new videos will be on a tripod in our little studio
@@RollingWrench I would like to start a rolling wrench repair job myself. But I'm afraid there's no stable money in it. Plus you got to deal with unruly customer's.
@@josephhooks6090 there is a unlimited demand for work in the mobile repair field. I highly recommend it. The customers are generally awesome!
Tripod, Tripod, Tripod please.
Sounds good
Man
5YEARS Ago???
Are you shitting me?
Time flies
yes boring!!!!! nah u good
Slow down man, why would anybody pay you to work on their scoot when you are so ruff with it and in such a hurry to get your $$ and get out of there...
Sorry dude, it’s my style. I’m quick and efficient. Been doing it for a living for 20 years :-)
Show me one handed is very Unbecoming unattractive educational show though put on the mount have somebody film you better
I hear ya!
Thank You