ขนาดวิดีโอ: 1280 X 720853 X 480640 X 360
แสดงแผงควบคุมโปรแกรมเล่น
เล่นอัตโนมัติ
เล่นใหม่
Hey Friends, here is my affiliate link to the product. If you purchase this item using my link then I will receive a small commission. Thanks for watching. GEAR INDICATOR LINK : amzn.to/3Zi9Xf8
Hi.Do you have to go though the entire process again, if you've disconnected your battery?Thanks
how did u pull out the connections on the plug? i dont wanna break mine
Hey Bro Sorry for late reply but you can use a flat head screw driver or something to pull the cap off
Thank you sir 🙌
Hye bro in cbr 600rr 2007 this red plug is for gear indicator?
It is for turn signal mode or you can be used for gear indicator
Is that the same connector that you would put the flasher relay if you have led lights?
Sorry for late reply, Yes this is the same connector as the flasher relay
Hello! If I remove the battery after I install it and program it will I have to program it again?
Im not sure
What if you only have 5 gears like the yamaha bolt?
You can find gear indicator for Yamaha bolt on amazon
Why does mine just blinks slow and does not go into 1st
Sorry for late reply but restart the process. turn bike off and disconnect plug and redo everything
Link to this product pleaseeeee
How in gods name you get that red cap off I feel I keep tugging imma pull my wires off
Sorry for late reply but you can use a flat head screw driver or something to pull the cap off
For 6 to 1 nothing ... stay 6 for evry gear ...
Thank You.
You're welcome
@@RidewithJay when i try to reset mine it counts 1-6 , how can i reset it? when you plug it in for the 1st time is the key or engoine all ready on?
Bad advice for beginners. You mentioned releasing clutch while changing gears and did not mention anything about rear tire being raised.
Because it’s obvious the tire needs to be spinning
Hey Friends, here is my affiliate link to the product. If you purchase this item using my link then I will receive a small commission. Thanks for watching. GEAR INDICATOR LINK : amzn.to/3Zi9Xf8
Hi.
Do you have to go though the entire process again, if you've disconnected your battery?
Thanks
how did u pull out the connections on the plug? i dont wanna break mine
Hey Bro Sorry for late reply but you can use a flat head screw driver or something to pull the cap off
Thank you sir 🙌
Hye bro in cbr 600rr 2007 this red plug is for gear indicator?
It is for turn signal mode or you can be used for gear indicator
Is that the same connector that you would put the flasher relay if you have led lights?
Sorry for late reply, Yes this is the same connector as the flasher relay
Hello! If I remove the battery after I install it and program it will I have to program it again?
Im not sure
What if you only have 5 gears like the yamaha bolt?
You can find gear indicator for Yamaha bolt on amazon
Why does mine just blinks slow and does not go into 1st
Sorry for late reply but restart the process. turn bike off and disconnect plug and redo everything
Link to this product pleaseeeee
How in gods name you get that red cap off I feel I keep tugging imma pull my wires off
Sorry for late reply but you can use a flat head screw driver or something to pull the cap off
For 6 to 1 nothing ... stay 6 for evry gear ...
Thank You.
You're welcome
@@RidewithJay when i try to reset mine it counts 1-6 , how can i reset it? when you plug it in for the 1st time is the key or engoine all ready on?
Bad advice for beginners. You mentioned releasing clutch while changing gears and did not mention anything about rear tire being raised.
Because it’s obvious the tire needs to be spinning