VN 5ltr V8 with F288-2 solid cam making 426Hp on the dyno.

แชร์
ฝัง
  • เผยแพร่เมื่อ 25 ต.ค. 2024

ความคิดเห็น • 14

  • @stuartstevens472
    @stuartstevens472 5 หลายเดือนก่อน +2

    Nice to see a'5 litre vid for a change!.
    Nice job.
    I have a 530hp 5.0 rover v8.
    Evolved over time

  • @barryphillips7098
    @barryphillips7098 5 หลายเดือนก่อน +3

    Larry Perkins KNEW how to build a Holden V8 Bathurst 1993, won qualifying, Won the Race, AWESOME everyone else was using Chev, NOT LP!! 👍👍👍👍

  • @user9005
    @user9005 4 หลายเดือนก่อน +1

    My little 304 just pulled 440hp and 480lbft at the wheels with 10psi of boost. Stock bottom end with a turbo cam. The torque curve just shoots up instantly on boost.

  • @stuartstevens472
    @stuartstevens472 5 หลายเดือนก่อน +1

    Add some volume /diameter to that snirkel and port/ blend the ports into t/b.
    Ideally an inch larger than t/b size.
    Bellmouth entry of snorkel, then bug airbox with filter.
    And you should get closer back to 426hp.
    👍

    • @com-mod9716
      @com-mod9716  5 หลายเดือนก่อน

      Planning to ditch the snorkel and get a VCM VT OTR to work with the setup 😎

  • @kenny1034
    @kenny1034 5 หลายเดือนก่อน

    That's a solid number for a 304 👍

    • @com-mod9716
      @com-mod9716  5 หลายเดือนก่อน

      Thanks mate!

  • @malcolmcooke2024
    @malcolmcooke2024 5 หลายเดือนก่อน +1

    looks like the poem chamber inlets could be enlarged for more air flow and power

  • @sambaxter7715
    @sambaxter7715 4 หลายเดือนก่อน

    That Iron Lion loves to roar! 🦁
    Sound much better than LS motors and probably go as hard (without having to make as much power) too.

    • @com-mod9716
      @com-mod9716  4 หลายเดือนก่อน

      For sure! Thanks mate.

  • @Archer_vlturbo88
    @Archer_vlturbo88 2 หลายเดือนก่อน +1

    Hey mate what size push rod are you running 8.700”?

    • @com-mod9716
      @com-mod9716  2 หลายเดือนก่อน

      Hi mate, 8.900" from memory to get the right geometry and stem contact pattern.

  • @kingkaiser7732
    @kingkaiser7732 4 หลายเดือนก่อน

    What did the motor build set you back mate?

    • @com-mod9716
      @com-mod9716  4 หลายเดือนก่อน +2

      Hi Mate, I did all the machine work and assembly myself so not as much as normal. Having said that, the manifold, loom, haltech and all the efi gear cost as much if not more than what everything inside the motor cost lol. Alot of coin to make 400+hp but damn it sounds good and not another LS 👍