Young man, I’ve got to thank you. Although I had to do more than your video because I did need to replace my motor, you were the only video I could find that takes time and detail to show exactly how everything goes back in place. Great job! And thanks again.
Thank you for sharing. I have done some simple DIY auto repairs before. I am definitely going to give this a try on my 06 G35. The hardest (easiest) part is the panel removal. A mechanic said that it would cost me $125.
My window won’t go up anymore when I try to make it go up it’s slowing goes up but than it stops and goes all the way back down I’m hoping it works when i try your method . I’m hoping it’s not the window motor that is weak
My rubber seal for the window got Sticky and stuck to my window so I rolled all the rubber out now I see the door wires from the out side what should I do
This works for me "temporarily"...about 3-4 weeks...than same problem with the anti-pinch mode initiating...after more investigation...I noticed the rubber on the tweeter frame metal piece was not inserted...and causing friction...I thought I had solved the problem...about 6 weeks later....problem started again...at this point I just give up...it goes up if I press the button continuously...so, that is as good as it get for me...in the mechanics manual. there is a ALIGNMENT bolt...well, there are actually 2 of them....the bolts that take the 12MM socket..they are different color...they look gold on my G35 2007...after loosening the bolt, the threaded metal with a slot at the end if turned clockwise will turn the window OUTWARD... if turned counter-clockwise will turn the window INWARD....but, I tried this also and nothing happens...at this point I give up...good luck to everyone on this....I did replace the motor already with new one...still same problem...It's some kind of alignment problem....because if I look at the top of the window if has rubbing marks from the RUBBER...or maybe the RUBBER weather seal is expanding too much with the heat...long shot...Oh well...I did my best..
I have a problem with my right window. I just changed the switch because it was bad and with the new one plugged in, when I roll up the window all the way up, it rolls half down. Will this solve my problem ?
I also tried changing the switch....because according to the mechanics manual....the switch MONITORS the functioning of the auto pinch mode.....oh, well...I tried....there is more one thing about some kind of gear alignment on the rails the window rides on...but after seeing some guy on You Tube replace everything to NEW and not have any success...I am probably just wasting my time in doing that....if anyone solves this problem let me know...thanks...
Young man, I’ve got to thank you. Although I had to do more than your video because I did need to replace my motor, you were the only video I could find that takes time and detail to show exactly how everything goes back in place. Great job! And thanks again.
I normally hate the camera person talking over the someone, but she gave me a laugh. Thank you for the video you two.
Great video. Basic and to the point. Now the window in my 06 works correctly. Thanks
Thank you soooooooo much, saved a trip to the mechanic!
Thanks man, this worked for my 04 Maxima as well!
Super simple...
Bro you are a LIFESAVER!!!
GENIUS!!!
Thank you SO freakin much for this video!!!
My man.. liked and subbed... just changed the motor and couldnt figure this shit out.
Thank youuuuu I couldn't find another video on those!!
Thank you for sharing this. Keep up the great work. I subd. !👍🏻👍🏻👍🏻
Good video bro! I need to do this to both of my windows. Thank you bro for making those helpful videos! 👍👍👍
How did you do the right side?
Big up from Canada 🇨🇦
Awesome. My sedan does not have this issue, but if it does appear now I know what to do. Thanks
@ 3:45 did you hold and press reset swtich again while rolling the windows up?
Thank you for sharing. I have done some simple DIY auto repairs before. I am definitely going to give this a try on my 06 G35. The hardest (easiest) part is the panel removal. A mechanic said that it would cost me $125.
Did it work on a 06?
@caden stinson Yes. It worked out well for me. Being from the IT space and my natural analytical skills helps me to get the job done.
You happen to know if the g35 have the same window as 350z?
Thanks for the video. I have this problem and also my window is off track. Video or instructions for that?? Thx
Thank you it's cold outside and it worked!!!!
Does this work for 2006 g35x?
Thank you man, you save me a lot of money and ma G35 now working perfect.
Question wat if its the passanger side window it has a switch on that side too???
Same question here
Suppose your window motor does not have a reset button? What do you do?
My window won’t go up anymore when I try to make it go up it’s slowing goes up but than it stops and goes all the way back down I’m hoping it works when i try your method . I’m hoping it’s not the window motor that is weak
Thanks so much helped me I did it
Saved me today thanks 🙏🏼💯
My rubber seal for the window got Sticky and stuck to my window so I rolled all the rubber out now I see the door wires from the out side what should I do
This works for me "temporarily"...about 3-4 weeks...than same problem with the anti-pinch mode initiating...after more investigation...I noticed the rubber on the tweeter frame metal piece was not inserted...and causing friction...I thought I had solved the problem...about 6 weeks later....problem started again...at this point I just give up...it goes up if I press the button continuously...so, that is as good as it get for me...in the mechanics manual. there is a ALIGNMENT bolt...well, there are actually 2 of them....the bolts that take the 12MM socket..they are different color...they look gold on my G35 2007...after loosening the bolt, the threaded metal with a slot at the end if turned clockwise will turn the window OUTWARD... if turned counter-clockwise will turn the window INWARD....but, I tried this also and nothing happens...at this point I give up...good luck to everyone on this....I did replace the motor already with new one...still same problem...It's some kind of alignment problem....because if I look at the top of the window if has rubbing marks from the RUBBER...or maybe the RUBBER weather seal is expanding too much with the heat...long shot...Oh well...I did my best..
I have the exact same problem with my 2004 g35 coupe... The reset works for a while, then acts up again.
I think this is also my problem. Any idea what is the best lubricant to use on the rubber? Maybe dry lube?
Thanks buddy. Good video
Cool best way so far
Thanks letting me the KEY will make the window go up....that may come in handy....
Great vid bro thanks.
Thanks, worked great.
Great vid man
I have a problem with my right window. I just changed the switch because it was bad and with the new one plugged in, when I roll up the window all the way up, it rolls half down. Will this solve my problem ?
i saw a video were if that happenes you can hold the reset switch for 20 seconds and it fixes it
Thank you
Thanks worked perfectly 👍
I have this issue with my passenger side, help please
Probably the same process
Thank you!!!
Very good
I got an 08 g37 coupe and i can't find the damn switch
Same.
I also tried changing the switch....because according to the mechanics manual....the switch MONITORS the functioning of the auto pinch mode.....oh, well...I tried....there is more one thing about some kind of gear alignment on the rails the window rides on...but after seeing some guy on You Tube replace everything to NEW and not have any success...I am probably just wasting my time in doing that....if anyone solves this problem let me know...thanks...
Thankssssssss
22 thousand people struggling. Including me😪
8 minute yap
Where’s the gs300?!!!!!!!!!! 😭
We still have it! Just havent made any changes to it worth filming. Maybe we will do a pulls video soon. :)