The main thing about K&N filters is that they're cotton, as opposed to traditional paper-fiber filters. That's also what makes them washable. And its not truly "washing", its cleaning, with the K&N filter recharge kit. But great vid! Wish these were easier to change on G's 😂
Just changed mine and this video made it a breeze. Besides the missing screw in the video, It looks like you're missing another screw on the left side of the glove box. Thanks for the content man.
Holy shit, if yours wasn't changed in 5 years, mine must have been in there 10. I just finished changing mine. It was literally packed with leaves and shit. Every fold was full of junk. Pretty satisfying to fix though.
@Motordyne G35 great video, I did it in like 5 minutes because of you! However you did say the remove both electrical connectors from the glove box(middle one and the left one). To my knowledge, the left one controls the airbags and should not be removed (but I don't think you ended up actually taking it off)
Great video. I read the title as Carbon Fiber Install for some reason and that's why I clicked it. glad I did though cause this is a great channel. Keep it up
Was a pain in the ass to change but fairly straightforward thanks to this video. The old filter was gross, must not have been changed in a while and I don’t blame the previous owner. Also was able to replace the glovebox lightbulb with an LED one, it was the perfect opportunity with the glovebox pulled out. Definitely makes it a bit brighter inside.
Fortunately my car didn't smell before when the A/C or heat was on. I changed it because I had bought the car used and figured the previous owner did not do it so I did a lot of maintenance as a preventative measure. If yours has a mildew smell now, it'll be a nice difference. For me i didn't notice much of anything, which I suppose is a good thing.
Nice video!!!! Did it in 5 minutes. Filters from Autozone has air flow arrow on a side. Mine was installed incorrectly with arrows on front of it. Now I have blower noise because something got into it.
Changing the cabin filters because that tire burning smell made the filters completely fail? Similar thing happening me along with in exhuast leak. I don't like smelling my cars fumes or other ppls fumes while stuck in traffic
I do believe my blower motor went bad in my 2007 g35. I have gone out & bought a new one in addition to a new cabin filter after watching this great video on how to put the filter I . My QUESTION IS, with the removal of all casements and boxes you have done in this video for the filter, can I just continue on taking that round white casement under the filter off to get to the blower motor? I am interested in doing this job today or tommorow. Thank you for your advice
I have an 07 and it’s a bit diff. Looks like I may have to take glove box out first Because there is a little black box attached to the white box that houses the blower motor
Yes I ended up taking the whole glove box out and can see everything now. Replaced my filter with the very same one you have here and about to start the blower motor installation. Think I’m most concerned with putting everything back together at this point..lol. Wish me luck ..I’m gonna need it
Not sure if you know much about the blower motor but I did not have to unassembke the white encasement the motor is in, just unscrew 3 screws with a Phillips head and out it came 👍 Now as I put the first wire hookup back into the new one, it does not connect all the way and ‘click in’ . I have tried it 2 diff ways and only fits the right way in but connection won’t go 100% I am kind of confused as to why, any suggestions you can give me I appreciate
excellent vid. bought an 03 g35 a year ago, with pretty stinky interior. Im guessing the cabin filter needs to be replaced? two weeks ago the hvac fan started vibrating violently when set above the second level. Is that the same process to get to the fan? thanks in advance
@@g35s oh man, sold that car six months ago and moved back to japan 4 months ago. when california, was on fire last summer, I set out to replace the cabin filter. turned out that there wasnt one in there. as a result, some leaves and other debris were stuck in the heater cage fan, causing it to be off centered, hence the vibration.
Bc it's a coupe vs sedan I believe. I tried doing the four screws in the glove box first but no luck since it had an extra screw by the trim. I have a g35 2006 coupe
Thanks so much bud, made this super easy. I know it seems unlikely but I bought a second hand G35 skyline and my cabin filter is so, SO much grosser than yours was here.
Love the exhaust bro but due to staying on budget I straight piped it from the cats back and noticed a loss In low end torque. Any way of fixing that while staying straight piped?
Thank you!.......I understand being on a budget and Motordyne, is not for people on a budget because it is beyond what people are even willing to consider paying for an exhaust. But just like with anything, you always get what you pay for. I wouldn't be worried about the loss of power. I would be more worried about the car running lean because of the added air flow, which will make the motor run hot. To fix this problem, you need a tune. If not, you need to put your OEM CATS back on or your motor will eventually blow up.
Motordyne G35 The OEM cats are still on. I just got a Resonater and muffler delete but yeah a tune is something I am looking into. Just gotta find the right tuner.
Any modifications after the cats, really have very little effect on performance. The potatoes are still in the exhaust. You do not need a tune if you have OEM CATS. Usually when people say strait piped, that is what they mean. I see you say straight piped after the CATS, I misread your statement. No tune needed because there is no change in power. All that you did is change the sound. It is like putting a different piece at the end of a trumpet. The piping is the same at the front, but at the end when the air comes out you change the cone. Just a change of sound, nothing else. Move further up the piping, allow more air flow, then things start changing.
No, thank you for the great content. Keep up the great work. Just subbed yesterday. So far you've helped me with my cabin air filter, PCV valve, interior cleaning products and more I'm sure I'm forgetting about! This channel has literally rejuvenated my love for the G! Too bad. I was hoping to look that good on the cheap!
I used to live in Ohio for 23 years, I hear you on the weather. Ohio has 89 days of sunshine per year and it snows. Arizona has 300+ days of sunshine per year and it snows in the mountains. Snow is hard on cars and humans, which was my main reason for moving. I used to say I hate the weather for 23 years. Thanks for subscribing and checking out my channel, hopefully some of my content will help you with your G.
my guess is you drive an auto bc you cant do a burnout lmaoo but just roll in to a puddle and hold the foot brake lightly just enough to stop you while you give it throttle with traction control off as long as you not on tires with crazy grip for manual pull the brake light fuse its buy the clutch pedal labeled as stop lamp dont drive on the street like this you'll have no brake lights and zero abs traction and the slip them rev it up dump the clutch while applying light brake and alot of throttle if you feeling good about it keep your foot floored while pressing the clutch fast and change to 2nd gear more wheel speed more smoke
You don't need to do all that! Just drop the glove box with 5 screws!!! (One is under on the left)
Really? I'll take a look. Thanks
Thanks for the video. This is ten times harder on an Infiniti than on a Toyota. Only one example of how much better the Toyota engineering is.
The main thing about K&N filters is that they're cotton, as opposed to traditional paper-fiber filters. That's also what makes them washable. And its not truly "washing", its cleaning, with the K&N filter recharge kit.
But great vid! Wish these were easier to change on G's 😂
Just changed mine and this video made it a breeze. Besides the missing screw in the video, It looks like you're missing another screw on the left side of the glove box. Thanks for the content man.
Changed mine too man. It was a pain getting it back on 😂
For a cabin filter, it is pretty difficult compared to most cars. I hear you.
Holy shit, if yours wasn't changed in 5 years, mine must have been in there 10. I just finished changing mine. It was literally packed with leaves and shit. Every fold was full of junk. Pretty satisfying to fix though.
Thanks a lot for ur effort on posting this. Really helpful on changing cabin filter on my Nissan Stagea 350RX as their dashboard are the same 👍👍👍👍
@Motordyne G35 great video, I did it in like 5 minutes because of you!
However you did say the remove both electrical connectors from the glove box(middle one and the left one). To my knowledge, the left one controls the airbags and should not be removed (but I don't think you ended up actually taking it off)
Wow they made that difficult. Thank you for the great walkthrough vid!
Best video I found. Legit made my night super easier changing everything out
Great video. I read the title as Carbon Fiber Install for some reason and that's why I clicked it. glad I did though cause this is a great channel. Keep it up
Thank you!
Jordan Floyd i did the the same thing
@@MotordyneG35 how much whp did you make? I have also have a 2005 g35 6mt but mine is a sedan
JUST did mine on my new to me 04 G35. Thank you.
Is it just me or did the old filter you take out was installed upside down? The airflow was pointing upwards
Was a pain in the ass to change but fairly straightforward thanks to this video. The old filter was gross, must not have been changed in a while and I don’t blame the previous owner. Also was able to replace the glovebox lightbulb with an LED one, it was the perfect opportunity with the glovebox pulled out. Definitely makes it a bit brighter inside.
Fortunately my car didn't smell before when the A/C or heat was on. I changed it because I had bought the car used and figured the previous owner did not do it so I did a lot of maintenance as a preventative measure. If yours has a mildew smell now, it'll be a nice difference. For me i didn't notice much of anything, which I suppose is a good thing.
What I didn’t even know it had a light lol ima replace my burnt out one too then 😂
Nice video!!!! Did it in 5 minutes. Filters from Autozone has air flow arrow on a side. Mine was installed incorrectly with arrows on front of it. Now I have blower noise because something got into it.
Lifesaver man, Thank you kindly
Thank you SO much for this! Had a mouse make a home in that casing -- needless to say, filter had to go!
Changing the cabin filters because that tire burning smell made the filters completely fail? Similar thing happening me along with in exhuast leak. I don't like smelling my cars fumes or other ppls fumes while stuck in traffic
I do believe my blower motor went bad in my 2007 g35. I have gone out & bought a new one in addition to a new cabin filter after watching this great video on how to put the filter I . My QUESTION IS, with the removal of all casements and boxes you have done in this video for the filter, can I just continue on taking that round white casement under the filter off to get to the blower motor? I am interested in doing this job today or tommorow. Thank you for your advice
lablvr6000 ....Yep, you are spot on!
I have an 07 and it’s a bit diff. Looks like I may have to take glove box out first Because there is a little black box attached to the white box that houses the blower motor
Yes I ended up taking the whole glove box out and can see everything now. Replaced my filter with the very same one you have here and about to start the blower motor installation. Think I’m most concerned with putting everything back together at this point..lol. Wish me luck ..I’m gonna need it
Not sure if you know much about the blower motor but I did not have to unassembke the white encasement the motor is in, just unscrew 3 screws with a Phillips head and out it came 👍
Now as I put the first wire hookup back into the new one, it does not connect all the way and ‘click in’ . I have tried it 2 diff ways and only fits the right way in but connection won’t go 100% I am kind of confused as to why, any suggestions you can give me I appreciate
Thank you sir!
Best guide ever💯
Watch the 6:37 mark....the last cabin filter was installed upside down!
vivemiracle dam nice catch
excellent vid. bought an 03 g35 a year ago, with pretty stinky interior. Im guessing the cabin filter needs to be replaced? two weeks ago the hvac fan started vibrating violently when set above the second level. Is that the same process to get to the fan? thanks in advance
Get the car detailed
@@g35s oh man, sold that car six months ago and moved back to japan 4 months ago. when california, was on fire last summer, I set out to replace the cabin filter. turned out that there wasnt one in there. as a result, some leaves and other debris were stuck in the heater cage fan, causing it to be off centered, hence the vibration.
@@blackpassenger damn lol mine had a rats nest in the old filter, hadn't been done since 06 lol
Is this the same for g37 coupe too?
Also the K&N is washable yes, but you don't put it back in wet.. wtf you let it dry first. You're really not that dense right?
good information to know I should probably change mine
For anyone watching this, the easier way is just by unscrewing the 4 screws inside the glove box and dropping it down. 10x easier
Thats what I thought and ill give it a try. Thanks
@@elmagico69 np I have no idea why he did it this way
Bc it's a coupe vs sedan I believe. I tried doing the four screws in the glove box first but no luck since it had an extra screw by the trim. I have a g35 2006 coupe
Where did you get the radar detector jammer?
Thank you I have to change mine
Very Helpful!!!
Thanks so much bud, made this super easy. I know it seems unlikely but I bought a second hand G35 skyline and my cabin filter is so, SO much grosser than yours was here.
Woo! Love your G, would love to have mine match up to that
I appreciate it, thank you.
Nice g bro
Thank you for watching! I see your red G also, congrats on owning a legend.
Love the exhaust bro but due to staying on budget I straight piped it from the cats back and noticed a loss In low end torque. Any way of fixing that while staying straight piped?
Thank you!.......I understand being on a budget and Motordyne, is not for people on a budget because it is beyond what people are even willing to consider paying for an exhaust. But just like with anything, you always get what you pay for. I wouldn't be worried about the loss of power. I would be more worried about the car running lean because of the added air flow, which will make the motor run hot. To fix this problem, you need a tune. If not, you need to put your OEM CATS back on or your motor will eventually blow up.
Motordyne G35 The OEM cats are still on. I just got a Resonater and muffler delete but yeah a tune is something I am looking into. Just gotta find the right tuner.
Any modifications after the cats, really have very little effect on performance. The potatoes are still in the exhaust. You do not need a tune if you have OEM CATS. Usually when people say strait piped, that is what they mean. I see you say straight piped after the CATS, I misread your statement. No tune needed because there is no change in power. All that you did is change the sound. It is like putting a different piece at the end of a trumpet. The piping is the same at the front, but at the end when the air comes out you change the cone. Just a change of sound, nothing else. Move further up the piping, allow more air flow, then things start changing.
Dude get the DNA cat back from Amazon for less than 300 bux and get some of that lowend back. For the money you can't lose
@@MotordyneG35 if this is true then how did he notice a loss of power? Isn't exhaust scavenging affected by catback exhaust?
Good stuff. Really appreciate the tutorial.
How often should these be changed? Previous owner did it 4 years ago.
This is ridiculous all the stuff that has to be removed
Is this the same process for a 06 350z?
Hi I have 04 G35 coupe When I start the car the high beam indicator on the dash blinks what does that mean anybody know
Jesus is the way, the truth and the life! Seek him!
Great how to man it was easier then I thought.
I have the same cabin filter. So the arrow should face down, right?
Yes! The outside air is being sucked down.
Is there a front lip on your G in this video? Stock bumper? Thanks man. Love the channel
Thank you for checking out my channel. My bumper is NOT OEM. I removed my OEM bumper and installed a NISMO front bumper, polyurethane, not fiberglass.
No, thank you for the great content. Keep up the great work. Just subbed yesterday. So far you've helped me with my cabin air filter, PCV valve, interior cleaning products and more I'm sure I'm forgetting about! This channel has literally rejuvenated my love for the G!
Too bad. I was hoping to look that good on the cheap!
I live in Canada...I took ownership of my 2007 in 2011 and didnt look nearly as good as yours :'( I hate our weather
I used to live in Ohio for 23 years, I hear you on the weather. Ohio has 89 days of sunshine per year and it snows. Arizona has 300+ days of sunshine per year and it snows in the mountains. Snow is hard on cars and humans, which was my main reason for moving. I used to say I hate the weather for 23 years.
Thanks for subscribing and checking out my channel, hopefully some of my content will help you with your G.
Already has, thanks!
How do you know when it's time to change the cabin filter??
Every 3 years or so
This dude really took 20 mins just to put the clip back into the hole.
What a pain, never going to replace it…..
Beautiful g
thanks for getting straight to the point
do you replace the stock nav with a stock coinn storage?
I love you
You don't put the filter back in wet jfc lol
Hey man what would I need to do a burnout in my g?
my guess is you drive an auto bc you cant do a burnout lmaoo but just roll in to a puddle and hold the foot brake lightly just enough to stop you while you give it throttle with traction control off as long as you not on tires with crazy grip for manual pull the brake light fuse its buy the clutch pedal labeled as stop lamp dont drive on the street like this you'll have no brake lights and zero abs traction and the slip them rev it up dump the clutch while applying light brake and alot of throttle if you feeling good about it keep your foot floored while pressing the clutch fast and change to 2nd gear more wheel speed more smoke
It’s a little ridiculous all the steps necessary to remove a serviceable item.
how often you replace it?
Every 15,000
Yikes, all of that just for the cabin filter!? It was probably easier to install the MREV2
& 5/16th spacer 😆
Subbed
There must be another simple way beside unscrewing everywhere
hang on you have all that work done to it and there,s still an egr valve installed???????????? wtf
Goddamn, it looks like a pain in the ass
Way too long.
4 grand for 35hp gain... nice car but that's stupid dude
IRHanley I just bought a 07 g35s and it makes 306hp bone stock ,only thing I'm doing is putting the air filter and wheels haha oh and muffler delete .
Leo jetlife doubt
literally just google g35 and look at the desc.