I thought the same thing while laughing . Do i really have to pay for this car ? It has a lot stuff that just makes me wonder . Yo this car is legit . It's famous.
I can't tell if Donut was playing it straight or they didn't actually understand that leaning-into-the-stereotype TikTok joke. On a serious note, as an American, I just use my gun (which everyone has in their glove box or sports bag) as a shift knob.
So, the flame restoration method is known as flame polishing, and it works with acetal plastics, like Delrin. It works really great with acrylic to make cut edges look like pure and clean glass.
Doesn't really work much with cat in it....the excess fuel just get caught in the cat and burns off. Bad for it yes... Blows it.. Would take a lot of them. For the exhaust... That's just theory... If it does damage to your exhaust there would have to be a weak point already. Imagine the different between anti lag pressure and on shitty keypop and there exhausts stay on 😂
James, turn the quart of oil around backwards when pouring. This will ventilate bottle and give you a smooth and consistent stream, as well as allowing you to get the spout closer to the oil fill point in most cases. -Dad
@@andrewcolton7430 Sounds reasonable. Just tried turning upside down. About broke my neck and scared the crap out of the guy in the next stall, which worked out for him.
14:43 definitely works, but only on PVC plastic. The semi soft stuff used on old dirt bikes and quads. HOWEVER…. There’s a better process. Use the finest grit sand paper you can find, polish off the oxidation, and use a heat gun, which has significantly more control.
Only potential issue I see there is that even the finest grit could sand away the texture of the part. The heat gun seems certainly like a more controllable option.
True story: While I was going though flight training, one of the pre-flight tests is a magneto loss test. You have two mags and swap between both and only one. Problem is the same key switch also goes all the way to ignition OFF. I was nervous the first time and gave it a little too much oomph and went right past R and L and straight to OFF. I immediately realized I screwed up and flipped it back to one of the running states and it backfired something fierce. Shook the whole plane.
To get a new 1qt bottle of oil pour started… pour it sideways (front label facing towards the fill hole). This will allow 2 things: 1. The spout can get a lot closer to the hole before the oil comes out. & 2. You’ll get a nice even pour with a steady air flow (no air gulping).
I know right, next thing you know they gonna find out you can just cover the bottle hole with your hand while you flip it over, and get too the fill hole. Personally I'm past all that. I installed a small tool box in the engine bay, away from belts, moving parts, and hot stuff, where I keep Just the things I need to do a basic check. 2 basic screw drivers, 1 set of pliers, a small flashlight, and guess what??? A few 6" paper funnels!!! Don't want to buy paper funnels? Large 6oz paper cups just cut the end of the cone 150ct $13 and leave the bs behind!
@@limjaheybobandy I have a SUV and I have my backpacking stuff in the back, besides if there's enough room in the front is room I don't have to use in the back. Any other time it would have been easiest just to put it in the back.
@@linkbond08 That's actually genius. I have 4 cylinder 2001 Xterra that has plenty, and I mean plenty of space in the engine bay for a nice tool box. Thanks for the awesome idea!
The antilag hack is known as “keybang”, they work on older “carburetor” cars since there is no ECU to control the fuel going through the engine when you shut it off, and basically the engine is still kinda running when the switch is OFF but the fuel isn’t ignited, goes into your tail pipe, and when you switch back ON, BOOM! EFI cars basically shuts the fuel pump (when you turn the car off) so there is no Bang….
@@persil98 I cant say tho, cuz the ECU of stock EFI vehicles tend to cut off the fuel when ignition is turned off. Now an standalone ecu could let this happen, cuz thats where 2 step comes into play, 2 step and antilag basically limits your RPMs by cutting the ignition, and let the fuel go into tailpipe without igniting it, so the force induction systems can be fully spooled (in case of turbos) at a limited Rpm, and eventually you’ll get bangs cuz that fuel is ignited! Peace ✌️
@@roshailsmedia2067 I can confirm this works on older cars with more "basic" EFI. My 92 miata will keybang every time I try it, but I've never got it to work on my 06 WRX or my 04 TL.
@@Mad.Spartan Understood, Agreed! I used to do on one of my old suzuki swift, eventually that lead to a broken head gasket lol, so wouldn’t recommend doing very frequently! :)
The "right kind of plastic" is Butelyne, common interior pieces for newish american cars and also seen on the exteriors of post 2000 jeeps and the chevy avalanche, it turns very light after a few years and you want to sweat the color back out with a heat gun, but a blowtorch is faster if youre good and steady
Or save the blow torch and just use tire foam.. the stuff that makes your wheels black again. Spray that shit on and let it soak in. Back to good. Tip of the day kids.
Yeah, I'd rather just use other compounds that I already use to clean my car, there are paint products which work, and can seal it at the same time. As they said, it compromises the plastic and only lasts for so long, then you have to replace it.
I don't know how long it lasts but it's definitely temporary, you'd be better off painting it with something more uv resistant but I think it'd have a different finish than normal plastic
For the black plastic that’s faded, if you melt coconut oil and use a paper towel to spread it on, it makes the plastic pretty and black for a month or so, depending on how much sun the car gets
I’m gonna be real. The absolutely flawless use of fart sound effects is why I subscribed to this channel and what keeps me coming back. They get me every time.
The plastic trick works, and I use it frequently detailing. You need to use a heat gun, a torch is too much. It doesn't work with very thick plastic very well though.
It’s also used on plastic stadium seats, but the key there is also a much slower billowing flame. You don’t want a ton of heat blowing too quickly at it, you just need the heat to barely lick the surface so it melts and refreezes the plastic quickly, which will refinish the surface since the grime and oxidation will burn right off as it happens
Question, how do you protect the paint? Do you need to? I've thought about doing this to my car but I'm concerned the paint near the plastic will bubble or peel.
We restored all the plastic on an old four wheeler to almost like new condition with this hack saving a massive amount of cash. We used both a torch and a heat gun and while I agree the torch can be a bit trickier I found it gave us a deeper shine in the end but probably could get that with the heat gun with a little more work. Torch was just faster and I'm impatient!
@@neonlights_12 If you dont stay on the same place with the heat to long the paint is ok. I have done it a couple of times but with a heat gun, never hurt the paint. It just takes a little more time
So the hack with the plastic trim and torch. Your biggest issue is you are using MAP gas I believe which burns hotter than propane. I used to work at a plastic rotational molding company and we would use the big propane weed burning torches to bring the color out on products. The heat realigns the plastic molecules which gives it that fresh shinny look. Love the video boys! Keep em coming!
MAPP burns way hotter than propane, but no one makes MAPP any more. That was almost certainly Map Pro, which is propylene, which is only marginally hotter than propane. I think they were mostly just holding it too close.
I was going to say the same thing. Local hoons love doing key bangers at 3am. Sounds like a gun shot, that is not a common thing to hear in urban Australia.
The antilag hack would work with a carbed engine, since the air flow would still suck gas despite the electric switch state being off. As soon as you turn on the switch there will be an excess of unburned gas inside the exhaust.
Anyone reading this, for god's sake don't do this to a car. You can bend a valve, warp the throttle body, even blow a converter or muffler off the car. It's about as smart as dropping a small bomb in the intake. A single backfire, (this is an intake backfire) can do thousands of dollars worth of damage. Oh and on a vehicle with a carb it will often burn the car to the ground. You just threw fire at a carburetor full of gasoline.
Tbf I've seen another YTer, Torque Steer, use the heating trim method but using a heat gun instead of a handheld blow torch and it worked wonders for his car
@@wyckedan for him it did last longer but it also be because of different climates. The TikTok was most likely done in the US whereas Torque Steer is in the UK, and we end up getting less direct sunlight than the US a lot of the year
The tennis ball works because of heat generated from friction similar to a buffer. The fibers might help like rubbing compound. You can’t get too hot cause you can do damage though.
I've taken a lid to an old gallon oil container and drilled a hole in it, stuck a piece of clear rubber hose through the hole and JB welded the shit out of it. Put the lid on a new bottle of oil, stick the hose in the oil fill hole, turn it upside down and stab the bottom of the bottle, it fills up quick with no drips
15:00 the proper way to do this is with a drill and a buffing attachment, dont put on any coumpound and build up tha friction, that way it only melts the very top layer, doing it with a blowtorch will make the plastics brittle
A little bit of compound helps with the burn you can get with buffing, preferably hit it after you spur off your pad between sections. Drills dont have enough rpm to get that shine needed, you need a buffer IMO
Also I'm sure it depends on the gas that you use; propane versus butane. I believe butane burns a ton hotter, so propane is the way to go. I've seen videos of this working on sun damaged stadium bleacher seats using a larger flamethrower nozzle and further distance from the nozzle in the plastic resulting in lower heat. Makes me wonder if this might work done fogged up headlights 🤔
You're lucky that potato juice didn't get all over the inside of your car. ..Almost had me? Now me and the mad scientist are going to have to rip apart that potato, and replace it with a real shift knob. Ask any racer, any real racer. It don't matter if you win by an inch or a mile. Potato shifting ain't winning!
For pouring oil: use key to put finger sized hole in bottle seal. Put finger over hole. Invert and place over fill. Remove finger and place bottle neck fully into filler neck. Squeeze bottle to increase flow release to bring air into bottle and squeeze again.
Back in the day with a carburetor, you'd shut off the key and then pump the gas a whole bunch, lift off the gas and turn on the key and run over your muffler when it blew off.
@@Mika-ph6ku Yeah. I was thinking about a specific F1 clip where the driver's steering wheel suddenly comes off when he's driving down the straight. He saved it by holding the column in one hand and got the wheel back on, then resumed racing.
@@znorrk2 yes, it need carburetor, you can add more fuel, when you turn engine off, pump gas and turn on the ingition. while driving it's easier. but it will blow up you'r exhaust, atleast muffler will be cut in half sooner or later.
@@znorrk2 Yea its at least a lot easier on carbs. I have done it with both my old moped and a kerosene/gasoline powered tractor. ;) (It blew the muffler like 10 meters behind me on the moped so i had to drive home without it late at night)
This works preferably on carb cars yes but some fuel injection motors also do it I know Ford rocam motor also does that like a boss and shoots 6 foot flames
The dipstick trick worked great for me topping off my ATF in my old Saturn because the fill point was super low in the engine bay and had a small hole.
Regarding the Anti-Lag hack, this generally only works on cars with a Carburetor as opposed to EFI. As with a Carby, the fuel / air is mixed by purely mechanical actuation and passive fluid dynamics, which continues even once the spark plug is disconnected. The combustible mixture will be passed out the exhaust valve and start to fill the tailpipe. The longer you have it 'off' for, or more you pump the gas, the bigger bang you get! This works extremely well on older cars, and in most cases if you overdo it, you will blow a hole in the muffler (permanently giving you that sweet aftermarket exhaust sound). In reality it sounds more like a backfire than an Anti-Lag system. It can be great fun if have a car you don't care about, and want to scare the crap out of anyone nearby!
11:48 fun fact if you do this with a carburetted vehicle while it's in motion you can literally detonate the muffler and cat. Raw unburned fuel/air charge will build up in these areas and when the engine fires back up again the resulting pops and bangs will be quite a bit bigger than expected. This happens because carburetted vehicles rely on physics rather than electronics to fuel themselves; any time the engine is rotating it is pulling fuel in and if it's not burning it that fuel gets pumped right back out again.
the oil dipstick thing is actually super useful. my three piece oil pan leaks, go figure and I just top her off every week but get oil literally everywhere.
Known about the blowtorch trick since 2009, being in the Jeep community. I have done this with my own wrangler. It works. But like they said the correct plastic and the practice is what it takes.
Love the exhaust pop. Some years ago, my buddy was driving his dads Chrylsler. He showed me how he could make the car pop by putting it in N while going 55 on the highway, turning the key to off and then back on. Blew the muffler and tail pipe off!
That whole "crackles and pops from the exhaust thing" back in the carbureted days you would push in the clutch, turn off the key, kick the gas pedal a couple times, turn the key back on then bump start it by dumping the clutch - key banger. That blow torch restore plastic thing, they do it on baseball stadium seats that fade; it works on a certain kind of plastic.
I have been watching this channel back you had 1 video a week. The fact that you put the time in to research stuff is amazing. I think everyone at Donut has to have a lot of fun as well as learn just as much getting out of there comfort zone with working on new things. Keep up the great content 👏.
I've done the torch months ago on my escape cladding and works amazingly well. 1st hold it 6inches away . 2nd move around alot . You can also use a heatgun
The oil hack: try pouring with the opening of the oil-container not down but up. This way you can pour without airbubbles interfering with the oil. Once there sufficient oil has been poured, you can flip the oil-container and pour more rapidly. Works even faster then using the oil-stick as a guide. Using a stick to guide the liquid however stays a brillant hack for when you need to pour very precise.
The ignition bang trick works great on a carburetated motorcycle. Just flip that kill switch on/off as you decelerate in gear and youll sound like a drive by
Yeah I don't think it works vehicles with electronic fuel injection. To work it requires fuel to be flowing to the cylinders while the ignition is is off - so carbs and maybe mechanical fuel injection.
You don’t let me down man! I come here for good vibes and great vehicle information and fun. Whenever I’m having a bad day I can always count on your channel for positivity 👍👍
I think instead of the blowtorch a heat gun would be a better option for the black trim. Less likely to set your car on fire and I think it would be a little more forgiving.
I was making my 1978 Datsun pop like that back in the 80's. Id rev to about 5 grand, cut the power for a second and turn it right back on. Sometimes id get a small flame out the pipes. Yes, it works
Yup it's trash. It can warp also , and yes it doesn't last. I've had way better luck with Griots garage black restorer stuff, it's about 5yrs ago I did my mk2 and it still looks ok. So glad I didn't listen to the idiots and heat it, I go to AMMONYC for my detailing info.
The homemade antilag trick was really popular in the '80s. I used to live near a highway overpass and everyone would do it every time they drove under it.
The pop trick works best on carbs, used to do it from time to time on my dirt-bike (and it's even easier on bikes because they have kill-switches). Never managed to do it on fi.
Used to Keybang the shit outta my D16 i had in my Honda (we call it keybanging in the UK) and with a nice system it would shoot big flames which was always fun
For the popping car hack, we do something similar in "piston popper" airplanes to check and see if the magnetos ground properly. We start with both mags ungrounded(active) and QUICKLY turn the key to the off position, then back on. If a person waits too long, fuel can build up and the engine will "backfire." Kinda looks like the guy in the hack is doing something similar and forcing fuel into the engine, then when the car's sparkplugs fire, kinda causes a backfire type deal.
6:03 Or! Hear me out here, you could realize that there is a reason that the opening to every oil bottle you've ever seen is on one side and not in the center. It's so that you can tip it, with the opening up top, and not spill oil everywhere. Literally every person I've ever seen put oil in their car, outside of people I've worked with in shops, does it wrong, and spills oil because of it.
14:49 the do this to the plastic seats in stadiums etc too. the plastic basically starts cracking on the surface due to sun light and this basically "melts" the top layer of the plastic "repairing" the plastic
"Oh, your car's a manual?"
"Yeah, I have the rare 5-spud."
"we only race organic"
This was a well put together joke
fryv-spud
I love how they still have joe do the funny scientist when Jeremiah is literally a mechanical engineer
engineer ≠ scientist
@@f1neekrants engineer > Random dumbass
@@dbowen22 fr, that guy is so irritating to me
Jeremiah is annoying, I prefer this fake scientist
@@dbowen22 random "dumb ass" = mechanical engineer for tik tok stuff
I’m gonna need a bunch of tennis balls
What are you doin' here lmao
That’s a lot of damage
@@commandercody3935 welp eyy not that i mind :D
@@whizxcoffee what?
Eyyyy I met u once at temple airsoft a few years ago, small world
Them seriously attempting the potato shift knob hack and not realizing it was a meme is just pure gold
it was a meme based off of the tennis ball replacement right?
@@origialtych no old mate filming it was Irish 😂
My favorite was then one of them asked "Where's this dude from??"
He's Irish. YOU MISSED THE COMEDY GOLD.
@@brentsaner uhhh didn’t see that coming tbh xd
Some people call the glove box the "Spud Box".
If the jetta ever gets sold to someone that doesn't know the show, they're gonna have a ton of questions about the previous life of the car. Lmao
I thought the same thing while laughing .
Do i really have to pay for this car ?
It has a lot stuff that just makes me wonder .
Yo this car is legit .
It's famous.
It's a racecar; it'll never be sold.
“Why the heck is there a giant hole in the middle of my Jetta?”
Let me see the Carfax 😂
"Is someone stirring macaroni in here?"
"No, that's just what good gear shifting sounds like."
Wap shifting
th-cam.com/video/yQBnPT2rX2g/w-d-xo.html
@@chinamanjw 🤮
To be fair, here in Ireland potatoes are found everywhere - including most glove compartments and sports bags.
I can't tell if Donut was playing it straight or they didn't actually understand that leaning-into-the-stereotype TikTok joke. On a serious note, as an American, I just use my gun (which everyone has in their glove box or sports bag) as a shift knob.
As a son of two Irish parents(but born in Britain) I can agree that potatoes are just everywhere 😁
I laughed so hard when the Irish guy pulled out a potato. Could not have been more perfect.
I reaaaaaaaaaaaaaaaaally hope they knew it was an utter pisstake :D
But if another famine comes around, you’re screwed.
So, the flame restoration method is known as flame polishing, and it works with acetal plastics, like Delrin. It works really great with acrylic to make cut edges look like pure and clean glass.
the "anti lag"...is called a key bang in NZ.
Also a great way to blow the welds out of your zorst pipe.
We call it a key bang in the Uk too
Key pop
Probably blow the cat out too!
yep, really bad for exhausts. Good way to destroy baffles in a muffler.
Doesn't really work much with cat in it....the excess fuel just get caught in the cat and burns off. Bad for it yes... Blows it.. Would take a lot of them.
For the exhaust... That's just theory... If it does damage to your exhaust there would have to be a weak point already. Imagine the different between anti lag pressure and on shitty keypop and there exhausts stay on 😂
"This car is trying to kill itself."
If I were that car I would too.
it's trying to put itself out of its misery
James, turn the quart of oil around backwards when pouring. This will ventilate bottle and give you a smooth and consistent stream, as well as allowing you to get the spout closer to the oil fill point in most cases.
-Dad
You mean like at 5:47 ?
I'm getting older...any other tips for a more consistent stream?
@@jbeutell more water low flow when dehydrated
@@andrewcolton7430 Sounds reasonable. Just tried turning upside down. About broke my neck and scared the crap out of the guy in the next stall, which worked out for him.
@@jbeutell pro tip make a funnel out of cutting the bottom part of a water bottle out and using the curved side that collects to the cap
The way you guys tend to turn the ads into skits and actually have fun with them is really cool just got to say
Uncle Jerry needs to be the national spokesperson for Keeps. Never thought I'd be so damn entertained by commercials
Literally the only ones i don't fast forward through
I love the voice he uses🤣
@@henryrouland6075 Then go watch homestar runner.
I must be a shitty human... They annoy and cringe the fuh out of me
@@brappplife9879 I agree with u and these people should all burn
14:43 definitely works, but only on PVC plastic. The semi soft stuff used on old dirt bikes and quads. HOWEVER…. There’s a better process. Use the finest grit sand paper you can find, polish off the oxidation, and use a heat gun, which has significantly more control.
th-cam.com/video/yQBnPT2rX2g/w-d-xo.html
Only potential issue I see there is that even the finest grit could sand away the texture of the part. The heat gun seems certainly like a more controllable option.
I haven’t used sand paper. But I used a heat gun on Jeep Wrangler fender flares about 20 years ago. Definitely worked back then.
We’ve been doing this for a longer than tiktok is alive.
Was about to type comment about heat gun. Have used it to renew old furniture. And it's might work on plastic
I'd recommend a yukon gold for your glove box potato. They're smaller and more dense.
not have given to the child. 😶🙂😎😃
wolf might have devoured the🚱🚯🚭🚳🚫⛔️🔞
will get nothing; and when you👧👦🧒👶🙊🙉🙈
And be sure to change it out every other week , cause, of course, this is totally better then ...... The french fries you could a had?
th-cam.com/video/yQBnPT2rX2g/w-d-xo.html
True story: While I was going though flight training, one of the pre-flight tests is a magneto loss test. You have two mags and swap between both and only one. Problem is the same key switch also goes all the way to ignition OFF. I was nervous the first time and gave it a little too much oomph and went right past R and L and straight to OFF. I immediately realized I screwed up and flipped it back to one of the running states and it backfired something fierce. Shook the whole plane.
Man I love the car side of TikTok
TikTok is cancer
*Maserati man*
Yoooo forzarizon!!!!!
Great sense of humor, almost had me🤣
@bete pisan you are the reason industrial revolution caused disastrous effects
" I PAY RENT MA" fucking had me rolling.
th-cam.com/video/yQBnPT2rX2g/w-d-xo.html
He’s so funny. As the lawyer when he said “woof woof” I lost it too 😭
This is so wholesome. you should have your son on more episodes with you
W
This killed me 🤣
Eh?!
To get a new 1qt bottle of oil pour started… pour it sideways (front label facing towards the fill hole). This will allow 2 things: 1. The spout can get a lot closer to the hole before the oil comes out. & 2. You’ll get a nice even pour with a steady air flow (no air gulping).
I just cut a water bottle top. Instant funnel.
6:20 and once you have the first quart in, you can cut the bottom out of the empty bottle and use THAT as a funnel.
I know right, next thing you know they gonna find out you can just cover the bottle hole with your hand while you flip it over, and get too the fill hole.
Personally I'm past all that. I installed a small tool box in the engine bay, away from belts, moving parts, and hot stuff, where I keep Just the things I need to do a basic check. 2 basic screw drivers, 1 set of pliers, a small flashlight, and guess what??? A few 6" paper funnels!!!
Don't want to buy paper funnels? Large 6oz paper cups just cut the end of the cone 150ct $13 and leave the bs behind!
@@linkbond08 w-why not just put it in the trunk?
@@limjaheybobandy I keep a filter wrench in the upper glove box.
@@limjaheybobandy I have a SUV and I have my backpacking stuff in the back, besides if there's enough room in the front is room I don't have to use in the back.
Any other time it would have been easiest just to put it in the back.
@@linkbond08 That's actually genius. I have 4 cylinder 2001 Xterra that has plenty, and I mean plenty of space in the engine bay for a nice tool box. Thanks for the awesome idea!
I love how childish james is and how he finds a potato shift knob the funniest thing on earth 😂
But isn’t it the funniest thing tho?😂
Seriously, Uncle Jerry always puts a smile on my face. Him and Dave better stick around for awhile.
They should give him a whole episode of B2B about the Buick Century.
th-cam.com/video/yQBnPT2rX2g/w-d-xo.html
Dang man, I want to like this comment, but it has achieved nice
@@seanj3667 I agree
I fuckin hate it
Potato knob requires a spud wrench to install
The antilag hack is known as “keybang”, they work on older “carburetor” cars since there is no ECU to control the fuel going through the engine when you shut it off, and basically the engine is still kinda running when the switch is OFF but the fuel isn’t ignited, goes into your tail pipe, and when you switch back ON, BOOM! EFI cars basically shuts the fuel pump (when you turn the car off) so there is no Bang….
I thought the same but it doesn't have to necessarily be carbed
@@persil98 I cant say tho, cuz the ECU of stock EFI vehicles tend to cut off the fuel when ignition is turned off. Now an standalone ecu could let this happen, cuz thats where 2 step comes into play, 2 step and antilag basically limits your RPMs by cutting the ignition, and let the fuel go into tailpipe without igniting it, so the force induction systems can be fully spooled (in case of turbos) at a limited Rpm, and eventually you’ll get bangs cuz that fuel is ignited! Peace ✌️
@@roshailsmedia2067 I can confirm this works on older cars with more "basic" EFI. My 92 miata will keybang every time I try it, but I've never got it to work on my 06 WRX or my 04 TL.
@@Mad.Spartan Understood, Agreed! I used to do on one of my old suzuki swift, eventually that lead to a broken head gasket lol, so wouldn’t recommend doing very frequently! :)
So what you’re saying is that its cap? Its not too clear to me because 1 english is not my native language and im just a starter at getting into cars😅
7:58 - James (sarcastically) "everyone has a potato lying around...."
Everyone in Ireland and/or Russia - "sure it's standard!"
We have a lying potato in the White House.
love how the potato joke went straight over their heads
Mine too... Care to elaborate?
@@danielnelson4881 the guy in the video was irish so the joke is they always carry potatoes
The potato hack was the most Irish thing I've seen. Always carry a spud with you. 😂
Yeah, I think that video was just a joke using Irish sterotype. "Where is this guy from?" I mean, obviously Ireland (or at least the character is).
@@Telthar 100%
Day 133 of asking Donut to bring old B2B back
Yes
Yes keep asking for all of us. Thank you!!✌🏼
@@jz9266 ye
@Wan ye
@@Jpower32 ye
The "right kind of plastic" is Butelyne, common interior pieces for newish american cars and also seen on the exteriors of post 2000 jeeps and the chevy avalanche, it turns very light after a few years and you want to sweat the color back out with a heat gun, but a blowtorch is faster if youre good and steady
Or save the blow torch and just use tire foam.. the stuff that makes your wheels black again. Spray that shit on and let it soak in. Back to good. Tip of the day kids.
Yeah, I'd rather just use other compounds that I already use to clean my car, there are paint products which work, and can seal it at the same time. As they said, it compromises the plastic and only lasts for so long, then you have to replace it.
I hear that it is only temporary, it fades pretty quick, no?
I don't know how long it lasts but it's definitely temporary, you'd be better off painting it with something more uv resistant but I think it'd have a different finish than normal plastic
@@shidfard it’s like using bug spray to clear your headlights
The parts with Joe remind me of the old donut days when Bart was hosting science garage
miss him ngl
th-cam.com/video/yQBnPT2rX2g/w-d-xo.html
What ever happened to Bart?
@@That_Car_Kidd Think he got fired or something and moved states. He’s now with Autotrader
Miss him and that part
For the black plastic that’s faded, if you melt coconut oil and use a paper towel to spread it on, it makes the plastic pretty and black for a month or so, depending on how much sun the car gets
I’m gonna be real. The absolutely flawless use of fart sound effects is why I subscribed to this channel and what keeps me coming back. They get me every time.
Cars and zebras has some good flatulence placement too.
Ngl this is the last place I’d expected to see griffin glad he’s getting into car stuff instead of the hype house
Hater
@@GardenGuy1943 😐 how am I hating I’m legit proud of him moving on to better things
The plastic trick works, and I use it frequently detailing. You need to use a heat gun, a torch is too much. It doesn't work with very thick plastic very well though.
I feel vindicated, I was just thinking that a heat gun seems like a way better idea while watching.
It’s also used on plastic stadium seats, but the key there is also a much slower billowing flame. You don’t want a ton of heat blowing too quickly at it, you just need the heat to barely lick the surface so it melts and refreezes the plastic quickly, which will refinish the surface since the grime and oxidation will burn right off as it happens
Question, how do you protect the paint? Do you need to? I've thought about doing this to my car but I'm concerned the paint near the plastic will bubble or peel.
We restored all the plastic on an old four wheeler to almost like new condition with this hack saving a massive amount of cash. We used both a torch and a heat gun and while I agree the torch can be a bit trickier I found it gave us a deeper shine in the end but probably could get that with the heat gun with a little more work. Torch was just faster and I'm impatient!
@@neonlights_12 If you dont stay on the same place with the heat to long the paint is ok. I have done it a couple of times but with a heat gun, never hurt the paint. It just takes a little more time
So the hack with the plastic trim and torch. Your biggest issue is you are using MAP gas I believe which burns hotter than propane. I used to work at a plastic rotational molding company and we would use the big propane weed burning torches to bring the color out on products. The heat realigns the plastic molecules which gives it that fresh shinny look. Love the video boys! Keep em coming!
That was my thought too, MAP is too hot.
MAPP burns way hotter than propane, but no one makes MAPP any more. That was almost certainly Map Pro, which is propylene, which is only marginally hotter than propane. I think they were mostly just holding it too close.
11:15 In Australia, thats called a Key-Banger. It only works in cars with a carburattor though!
I always love the way Joe plays "expert" characters.
joe mama'd
that “anti-lag” hack is very common in australia, we just call it key banging
😂😂😂
I was going to say the same thing. Local hoons love doing key bangers at 3am. Sounds like a gun shot, that is not a common thing to hear in urban Australia.
Lotta 15 yo’s here in Sweden do that with their mopeds too haha
Works best with a Carby, and if you do it good enought, she will peel your exhaust box like a banana!
Same thing here in New Zealand, any old carby motor will key bang if you try haha
I could tell you what’s worse than not having a shift knob… not having a driver’s seat.
i’ve got a solution: massive potato
not having an engine
@@peepeepoopooicantgochoocho5670 not having
Well, it's probably not worse than having no shift knob and no brakes at the same time.
The antilag hack would work with a carbed engine, since the air flow would still suck gas despite the electric switch state being off. As soon as you turn on the switch there will be an excess of unburned gas inside the exhaust.
works on injection engine too if you have no catalytic converters
Did it with a 93 Dakota. Easier if you’re moving in gear. It did turn the muffler into one of those exploding joke cigars tho. Use with caution.
Anyone reading this, for god's sake don't do this to a car. You can bend a valve, warp the throttle body, even blow a converter or muffler off the car. It's about as smart as dropping a small bomb in the intake. A single backfire, (this is an intake backfire) can do thousands of dollars worth of damage.
Oh and on a vehicle with a carb it will often burn the car to the ground. You just threw fire at a carburetor full of gasoline.
@@benpeak5047 gunna try jt on my 2002 v8 dakota, it already cracks and pops just revving it
@@DownHillgamer my 1995 suzuki swift does it, very loud (geo metro in the USA)
8:06 Ireland, he's from Ireland, everyone uses spuds for everything here 🤣
Tbf I've seen another YTer, Torque Steer, use the heating trim method but using a heat gun instead of a handheld blow torch and it worked wonders for his car
If had it work just fine both ways, the problem is it only lasts about a week
@@wyckedan for him it did last longer but it also be because of different climates. The TikTok was most likely done in the US whereas Torque Steer is in the UK, and we end up getting less direct sunlight than the US a lot of the year
@@wyckedan long enough if you're just selling your car 😁
@@wyckedan That's why you clear coat the plastic immediately after you do this.
@@wyckedan Keeps it looking great for much longer. You can do the same thing to headlights after polishing them.
The tennis ball works because of heat generated from friction similar to a buffer. The fibers might help like rubbing compound. You can’t get too hot cause you can do damage though.
When I change my oil. I pour the first qt in and cut the bottom of the first qt bottle off and use it as a funnel
I've taken a lid to an old gallon oil container and drilled a hole in it, stuck a piece of clear rubber hose through the hole and JB welded the shit out of it. Put the lid on a new bottle of oil, stick the hose in the oil fill hole, turn it upside down and stab the bottom of the bottle, it fills up quick with no drips
@@lordowl3533 that's a great idea. I think I might do that instead
15:00 the proper way to do this is with a drill and a buffing attachment, dont put on any coumpound and build up tha friction, that way it only melts the very top layer, doing it with a blowtorch will make the plastics brittle
Another method is with a temperature controllable heat gun
A little bit of compound helps with the burn you can get with buffing, preferably hit it after you spur off your pad between sections. Drills dont have enough rpm to get that shine needed, you need a buffer IMO
Also I'm sure it depends on the gas that you use; propane versus butane. I believe butane burns a ton hotter, so propane is the way to go. I've seen videos of this working on sun damaged stadium bleacher seats using a larger flamethrower nozzle and further distance from the nozzle in the plastic resulting in lower heat.
Makes me wonder if this might work done fogged up headlights 🤔
Potato shifting, not double-clutching like you should.
You're lucky that potato juice didn't get all over the inside of your car. ..Almost had me? Now me and the mad scientist are going to have to rip apart that potato, and replace it with a real shift knob. Ask any racer, any real racer. It don't matter if you win by an inch or a mile. Potato shifting ain't winning!
For pouring oil: use key to put finger sized hole in bottle seal. Put finger over hole. Invert and place over fill. Remove finger and place bottle neck fully into filler neck. Squeeze bottle to increase flow release to bring air into bottle and squeeze again.
I blew up my muffler, shortly after learning the backfire hack. Gotta keep it floored, while the key is off.
Back in the day with a carburetor, you'd shut off the key and then pump the gas a whole bunch, lift off the gas and turn on the key and run over your muffler when it blew off.
th-cam.com/video/yQBnPT2rX2g/w-d-xo.html
@@JonJon-it8kk was that Rick Astley performing that stunt at the end?
I mean, if you don't hava a muffler, you have nothing to worry about...
@@nicolasolmos1386 actually, without the muffler as a combustion chamber, it's not as effective.
Whats worse than not having a shift knob?
James: ~litterally nothing~
Not having a steering wheel maybe?
@@pallemanden just slap a potato on the column and steer with 1 hand
@@Mika-ph6ku Yeah. I was thinking about a specific F1 clip where the driver's steering wheel suddenly comes off when he's driving down the straight. He saved it by holding the column in one hand and got the wheel back on, then resumed racing.
James when was last time that you say: " This is everything you need to know....." we all miss that.
about 2 weeks ago
3:43 fixed my brakes with the tennis ball hack, best tool ever
It's about time you got a science staff! Keep up the good work, Joe Fist the Scientist!
They had one, then he left to raise a family or something. :(
Cannot get enough of this series and the Amazon products series! Always a joy to watch
me either
@@DyslexicMitochondria hey bro i watch ur videos. Love ur channeI
The popping exhaust has worked for me, I have literally blown up an exhaust doing this, but it was deffo worth it :)
Now I wanna try it💀
I believe this only works on carbs, not injector vehicles.
@@znorrk2 yes, it need carburetor, you can add more fuel, when you turn engine off, pump gas and turn on the ingition. while driving it's easier. but it will blow up you'r exhaust, atleast muffler will be cut in half sooner or later.
@@znorrk2 Yea its at least a lot easier on carbs. I have done it with both my old moped and a kerosene/gasoline powered tractor. ;)
(It blew the muffler like 10 meters behind me on the moped so i had to drive home without it late at night)
This works preferably on carb cars yes but some fuel injection motors also do it I know Ford rocam motor also does that like a boss and shoots 6 foot flames
The heat truck works remarkably well on certain types of plastics but don’t concentrate the flame in one spot for too long.
When the shop scientist 👨🔬 said ,”It’s Kind Of Like a Jersey Mike’s Sub!” I lost it💀😂
The dipstick trick worked great for me topping off my ATF in my old Saturn because the fill point was super low in the engine bay and had a small hole.
Regarding the Anti-Lag hack, this generally only works on cars with a Carburetor as opposed to EFI. As with a Carby, the fuel / air is mixed by purely mechanical actuation and passive fluid dynamics, which continues even once the spark plug is disconnected. The combustible mixture will be passed out the exhaust valve and start to fill the tailpipe. The longer you have it 'off' for, or more you pump the gas, the bigger bang you get!
This works extremely well on older cars, and in most cases if you overdo it, you will blow a hole in the muffler (permanently giving you that sweet aftermarket exhaust sound). In reality it sounds more like a backfire than an Anti-Lag system. It can be great fun if have a car you don't care about, and want to scare the crap out of anyone nearby!
11:48 fun fact if you do this with a carburetted vehicle while it's in motion you can literally detonate the muffler and cat. Raw unburned fuel/air charge will build up in these areas and when the engine fires back up again the resulting pops and bangs will be quite a bit bigger than expected. This happens because carburetted vehicles rely on physics rather than electronics to fuel themselves; any time the engine is rotating it is pulling fuel in and if it's not burning it that fuel gets pumped right back out again.
After that shift knob mod the Jetta should be named “THE LOADED POTATO”
I used to do the “anti lag” pop all the time in my old civic. Driving through downtown I thought it was funny to scare people.
th-cam.com/video/JRtxlJogn90/w-d-xo.html
Aussies do keybanging the best
The hack for anti lag is just called "key-banging" loads of boy racers in Ireland do it and it just ruins the engine
Doesnt ruin the whole engine just ur coil packs and that
Used to do that holding down the kill switch to make the old XR pop.
It also only works on carby engines not efi
@@macmitch5 have to kill the power to the coil packs instead of the ignition. Still works
@@macmitch5 You can do it with EFI it’s just a little harder
the oil dipstick thing is actually super useful. my three piece oil pan leaks, go figure and I just top her off every week but get oil literally everywhere.
Adam Sandler was a nice addition to the team guys. 👍
So many bots wtf
Known about the blowtorch trick since 2009, being in the Jeep community. I have done this with my own wrangler. It works. But like they said the correct plastic and the practice is what it takes.
9:25 OK, hear me out:
Someone should make an edit of the first Fast and Furious movie and replace every single gear-shift with a potato gear-shift.
Love the exhaust pop. Some years ago, my buddy was driving his dads Chrylsler. He showed me how he could make the car pop by putting it in N while going 55 on the highway, turning the key to off and then back on. Blew the muffler and tail pipe off!
That whole "crackles and pops from the exhaust thing" back in the carbureted days you would push in the clutch, turn off the key, kick the gas pedal a couple times, turn the key back on then bump start it by dumping the clutch - key banger.
That blow torch restore plastic thing, they do it on baseball stadium seats that fade; it works on a certain kind of plastic.
When liquid goes through my exhaust pipe I usually experience an explosion. Your results may vary.
Excuse me what?
@@celticsprods Taco Bell joke
@@neesan9962 no I think it means something else
@@celticsprods I mean.. I wouldn’t call the wang the exhaust pipe if that’s what you mean.
@@neesan9962 it has to be a penis joke
James' straight up surprise and delight brightens up my week. 🙂
Blowtorch hack works best on acrylic. Used to make signs and use the same method for cleaning up edges
I have been watching this channel back you had 1 video a week. The fact that you put the time in to research stuff is amazing. I think everyone at Donut has to have a lot of fun as well as learn just as much getting out of there comfort zone with working on new things. Keep up the great content 👏.
I've done the torch months ago on my escape cladding and works amazingly well. 1st hold it 6inches away . 2nd move around alot . You can also use a heatgun
That's terrible for the trim in the long run. You're much better off using a quality trim dressing.
Make sure it's also very clean, oil and stuf will leave nasty mark
The problem is the plastic underneath is now brittle, the heat just moves the oils around within the plastic
Dude these spam accounts are out of control ^^^^^
@@JustTheTip556 amen
I swear James has the cutest, most adorable giggle I've ever heard.
It’s contagious and makes me happy
He has such a great camera presence and personality, very wholesome cheerful attitude
@@AudreysKitchen iiii
The oil hack: try pouring with the opening of the oil-container not down but up. This way you can pour without airbubbles interfering with the oil. Once there sufficient oil has been poured, you can flip the oil-container and pour more rapidly. Works even faster then using the oil-stick as a guide. Using a stick to guide the liquid however stays a brillant hack for when you need to pour very precise.
Joe is hilarious, especially on the podcast, glad to see him in videos too
@Oatmeal Connoisseur Oh shut up hater!
@Oatmeal Connoisseur nope, he is what he is now shut it.
Joe is tons of fun in the podcasts, he really should do more videos
@Oatmeal Connoisseur no u are
@Oatmeal Connoisseur nailed it. I agree, he’s trying to hard to be funny and it’s cringe
Would have been great to have Bart make a special appearance as the scientist
Well they also had Sr. Jerry the guy with a freaking mechanical engineering degree
The ignition bang trick works great on a carburetated motorcycle. Just flip that kill switch on/off as you decelerate in gear and youll sound like a drive by
Yeah I don't think it works vehicles with electronic fuel injection. To work it requires fuel to be flowing to the cylinders while the ignition is is off - so carbs and maybe mechanical fuel injection.
14:50 it only works on ABS, which is why it melted your mirror and handle, which are a softer plastic. The splitter will be made of ABS.
Love when James says: As we know jetta is a race car..."😅😅😅
You don’t let me down man! I come here for good vibes and great vehicle information and fun. Whenever I’m having a bad day I can always count on your channel for positivity 👍👍
7:00 I love Jersey Mike’s subs and the juice. LOL
I think instead of the blowtorch a heat gun would be a better option for the black trim. Less likely to set your car on fire and I think it would be a little more forgiving.
I always love seeing Joe in videos KEEP IT JUICED!!!
You know you’re getting old when you google “what does cap mean”
What does it mean? Haha I'm old now.
@@BobStoneBoi a lie, or false
Nah just means slang is getting dumber and dumber
Uncle Jerry and Dave's commercials make me genuinely happy. I always make sure to watch them!
I was making my 1978 Datsun pop like that back in the 80's. Id rev to about 5 grand, cut the power for a second and turn it right back on. Sometimes id get a small flame out the pipes. Yes, it works
I've heard that the fire vs plastic "hack" is just a temp fix and that it'll fade back and be worse.
Yup it's trash.
It can warp also , and yes it doesn't last.
I've had way better luck with Griots garage black restorer stuff, it's about 5yrs ago I did my mk2 and it still looks ok.
So glad I didn't listen to the idiots and heat it, I go to AMMONYC for my detailing info.
Day 5 of asking for an Up to Speed on the Nissan Frontier/Navara/Titan
They're crap. Now you're up to speed.
Just get a Tacoma/tundra now you're up to speed
@@skippy1071 cap
@@skippy1071 They're absolutely fucking indestructible and your opinion is garbage. Now you're up to speed
@@jj02mc27 fr 😂
Episode lacked the energy that we love from donut
Guest host was not a good idea
Agreed who is this guest? How is a relatable to any of us donut lovers?
Guest host was not funny at all. Idk why james kept laughing at everything he said
Hard to be believe someone with literally negative charisma could have over…10..million followers..seriously wtf TikTok
th-cam.com/video/yQBnPT2rX2g/w-d-xo.html
The homemade antilag trick was really popular in the '80s. I used to live near a highway overpass and everyone would do it every time they drove under it.
The two small suculant plants on the desk really give off a "classy" vibe haha
I won't lie, that exhaust pop "hack" is something I really do want to try once. I doubt my car will ever forgive me though
Won’t work unless you have a straight pipe 👀
The pop trick works best on carbs, used to do it from time to time on my dirt-bike (and it's even easier on bikes because they have kill-switches). Never managed to do it on fi.
Used to Keybang the shit outta my D16 i had in my Honda (we call it keybanging in the UK) and with a nice system it would shoot big flames which was always fun
I managed to do it on my fuel injected Honda motorcycle. I discovered it by accident while riding.
Depends on the fi system, a lot of systems also kill the fuel system instead of just the ignition
th-cam.com/video/yQBnPT2rX2g/w-d-xo.html
For the popping car hack, we do something similar in "piston popper" airplanes to check and see if the magnetos ground properly. We start with both mags ungrounded(active) and QUICKLY turn the key to the off position, then back on. If a person waits too long, fuel can build up and the engine will "backfire." Kinda looks like the guy in the hack is doing something similar and forcing fuel into the engine, then when the car's sparkplugs fire, kinda causes a backfire type deal.
6:03 Or! Hear me out here, you could realize that there is a reason that the opening to every oil bottle you've ever seen is on one side and not in the center. It's so that you can tip it, with the opening up top, and not spill oil everywhere. Literally every person I've ever seen put oil in their car, outside of people I've worked with in shops, does it wrong, and spills oil because of it.
Same with juice and milk bottles
After watching a lot of deep dive science chats its nice to kick back and see some idiots make slime for the 5th time ; )
Turn the quart of oil sideways when you start to pour and you don’t need a funnel.
14:49 the do this to the plastic seats in stadiums etc too. the plastic basically starts cracking on the surface due to sun light and this basically "melts" the top layer of the plastic "repairing" the plastic