wow, I'm thrilled. This is how to fly a helicopter. Not like this nervous fidgety guys. After 25 years I started flying helicopters again, very small with the Red Bull BO 105 from Carrera (identical to the RC ERA Modster models etc.). FLISHRC makes you want more...
Hello sir, I have been checking out a lot of your videos I like your content and I like the way you describe your builds and show the after build flights I was wondering do you build helicopters for people or do you sell the ones that you build? I would like to know I am interested in, getting one 450 to 500 size thanks
@@vincentcimino1963 very basic assembly. I did not even need to do all the work I did for the lights if I didn’t want them. Also, they can do the lights for you if you ask for extra. So really, it’s putting in the mechanics, bolting them and connection the rail motor plug and that’s it. They even test fly your heli and send you a video before shipping.
Hello I finally pulled the trigger on the Roban ec 500 as a BNF I have my own remote and reciever that it comes with purchased separately can you walk me through the set up to the helicopter not seeing any videos on this thanks in advance.
Hello flight667, i alway love to see your heli-fascination videos, i love those! Now i am infected again , the infection caused by you! I have two 450 align professiona l helis with the tube-driven tailmotor/ gear, which I hate because even a slight touch with gras or something else during take-off or landing very often kills more or less components of the tail-mechanics. I often in the past thought about replacing All these(damned) mechanical parts including the tail-servo with an motor driven direct drive tail. Do you think I just could replace all the trex tail- parts with the prop, the outrunnermotor and the Dual ESC ,bought from Flish, and connect that to my beast- FB controller ?
@@peteheymes259 are these flybarless helicopters or the older flybar models? If FBL, yes you can but it all depends on your flight controller or flybarless system. These are tail motors and ESCs (25A) that can be modified to fit the old 450s. I did that with one of my Align 450 Sports. I used a Micrbesst BeastX with the added firmware for tail motors.
Thank you for your Answer! Yes, I have two FBL align450's (pro DFC)and one sport with flybar. Im very interested, what the mentioned tailmotor firmware update for the beastxx is, because that would help a lot. I am using beastxx on the align 450 pro DFC mechanics.. 😮
Thank you very much indeed! for your help and your hints. Solution sometimes are so close ; freakware is just 40 miles from my place! I installed studioX, connected to my microbeast- plus and was ready for the update! How is your 450-w.beastx doing in comparison to the Flish 450 regarding to the tailmotor functionality?
@@peteheymes259 tail motor is working nice. I bought a tail motor with same specs as the 450 FishRC, removed my tail mechanics and make a plate that connects the motor to the tail end. Very simple. Then connected the tail motor ESC and controls as with the main motor. You will need to “Y” the power supply.
after watching the flying part for a second time I have a question: Is it possible to set the gyro less sensetivi? It looks a lttle bit too perfect ;-)
@@Carmanon thank you for considering sending one to me. I would review and provide my honest feedback. If ok with that please let me know and I will provide details.
@@cpotts672 yes they may seem expensive but it’s Ready To Fly 500 class helicopter with quality electronics. I am not sure where you get $1700. The price is currently $1100 from the Flish RC store on Aliexpress. This is shipped cost. Do compare and see for yourself in more details.
Looks great !
@@majorsmackdown thank you. I recently got a different version and I will be doing a video on it soon.
wow, I'm thrilled. This is how to fly a helicopter. Not like this nervous fidgety guys. After 25 years I started flying helicopters again, very small with the Red Bull BO 105 from Carrera (identical to the RC ERA Modster models etc.). FLISHRC makes you want more...
@@billysallerlei thanks for your positive comment. Appreciate it.
Absolutely great flight thanks i subscribe
Thanks for a nice video, in what port do you set the lightssupplay ? And how many volts is it in there?
Hello sir, I have been checking out a lot of your videos I like your content and I like the way you describe your builds and show the after build flights I was wondering do you build helicopters for people or do you sell the ones that you build? I would like to know I am interested in, getting one 450 to 500 size thanks
@@rcsfinest1883 thank you. I keep my helicopters. I have also built them for friends in the past.
Very nice, so they come like that? You have to do the assembly?
@@vincentcimino1963 very basic assembly. I did not even need to do all the work I did for the lights if I didn’t want them. Also, they can do the lights for you if you ask for extra. So really, it’s putting in the mechanics, bolting them and connection the rail motor plug and that’s it. They even test fly your heli and send you a video before shipping.
@@Flight6677 wow ok, I have the Flywing Huey arriving soon, I’ll have to look into on of these, they look like they cost about the same $$??
I use led lights that power from a pp3 battery you just plug the battery in fit the canopy and go.
Are you using the H1 lite or standard H1
@@Lonsome1223 h1 stock from FlishRC
How many minutes on the flight time up in the air?
@@123windyron 9 to 10min. You can do more with larger capacity batteries
@Flight6677 ok thanks bud mine will be here in another month from flish
Could you make a install vid secureing the mechanism into the frame mine is comeing in a month?
@@123windyron flishRC has videos on their YT channel.
Hello I finally pulled the trigger on the Roban ec 500 as a BNF I have my own remote and reciever that it comes with purchased separately can you walk me through the set up to the helicopter not seeing any videos on this thanks in advance.
Flish RC has many tutorials on how to do this. Send them an email or contact their shop on AliExpress and the will help you set it up.
How did you tint the windows?
Thanks
Mark.
Hello flight667, i alway love to see your heli-fascination videos, i love those! Now i am infected again , the infection caused by you! I have two 450 align professiona l helis with the tube-driven tailmotor/ gear, which I hate because even a slight touch with gras or something else during take-off or landing very often kills more or less components of the tail-mechanics. I often in the past thought about replacing All these(damned) mechanical parts including the tail-servo with an motor driven direct drive tail. Do you think I just could replace all the trex tail- parts with the prop, the outrunnermotor and the Dual ESC ,bought from Flish, and connect that to my beast- FB controller ?
@@peteheymes259 are these flybarless helicopters or the older flybar models? If FBL, yes you can but it all depends on your flight controller or flybarless system. These are tail motors and ESCs (25A) that can be modified to fit the old 450s. I did that with one of my Align 450 Sports. I used a Micrbesst BeastX with the added firmware for tail motors.
Thank you for your Answer! Yes, I have two FBL align450's (pro DFC)and one sport with flybar. Im very interested, what the mentioned tailmotor firmware update for the beastxx is, because that would help a lot. I am using beastxx on the align 450 pro DFC mechanics.. 😮
@@peteheymes259 go to freakware on line and get the upgrade.
Thank you very much indeed! for your help and your hints. Solution sometimes are so close ; freakware is just 40 miles from my place! I installed studioX, connected to my microbeast- plus and was ready for the update! How is your 450-w.beastx doing in comparison to the Flish 450 regarding to the tailmotor functionality?
@@peteheymes259 tail motor is working nice. I bought a tail motor with same specs as the 450 FishRC, removed my tail mechanics and make a plate that connects the motor to the tail end. Very simple. Then connected the tail motor ESC and controls as with the main motor. You will need to “Y” the power supply.
after watching the flying part for a second time I have a question: Is it possible to set the gyro less sensetivi? It looks a lttle bit too perfect ;-)
Yes, you will have to get into the H1 programming. You can also increase the expo and shave off some of the twitching. She flies very nice though.
Hi did you have to calibrate the compass ? Thanks
@@patchworkj no I did not need to do that. Although she is not landing in the exact spot when I switch to home, so perhaps I need to do that now.
Thanks
Where did you buy from it and how much does it cost???RTF version. Light part kit.
FlishRC store on Aliexpress orAlibaba. Its not cheap but it includes everything - check for your cost at the store. Shipping was extra.
😀Loved your video! Would you like to try out our OH-58 or UH-1D? Happy to send you one to check out!
@@Carmanon thank you for considering sending one to me. I would review and provide my honest feedback. If ok with that please let me know and I will provide details.
If you want one of these birds better grab onto your wallet, i priced out a md 500/500 scale, shipping alone was 200 bones, total amount 1700 dollars.
@@cpotts672 yes they may seem expensive but it’s Ready To Fly 500 class helicopter with quality electronics. I am not sure where you get $1700. The price is currently $1100 from the Flish RC store on Aliexpress. This is shipped cost. Do compare and see for yourself in more details.
You have too many lazy shorts. Unsubscribed.
@@rmb1 good 😊