RC ERA - EC 135 (C123) RC Helicopter - how to open and repair
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- Here I am repairing a cut LED wire. However, in order to reach the wire, I have to open the fuselage and access the cut wire to solder. This video will hopefully show the process in which diffusers opened and put back together.
- บันเทิง
Good showing 👍
👍👍👍Good video.
Thank you for watching.
Very odd, the lower swashplate is "inverted" so that the balls are actually below the plane of the plate. Normally the balls would be inline with the balls of the upper swashplate. I guess they needed to do that for clearance reasons.
For the calculated price, it seems to be a very complex production of the C123 for the manufacturer.
Excellent video. Good work tearing down and rebuilding!
Did you ever do one on the C189 MD500? Mine has all needed parts now and I need to rebuild it. Put back together. Been sitting for 3 months. I know there are long and short screws. 🙄
@@OHHP3712U I will do one for the C189
@@Flight6677
Awesome! You are good at these and it’s very helpful Content!
2 things...yellow tips on top of rotors and you really should put a tiny bit of glue to the tips of the antennas, if not you will lose them in the grass and NEVER find them.
Thanks. A little glue will not hurt but only put it on one side of the antenna, otherwise when you have to open them again it will be messy. What about yellow tips on top of rotors?
@@Flight6677 If the yellow tips are facing up the blades are mounted correctly.
@@jeffkraus1457 yes that’s true. But it’s good to also understand the technical details about the leading edge of the blades.
hate it when mother nature attacks your rc, lol part of the hobby
How does the tail rotor attach to the tail motor ? , does it just pop off ?
I did not remove it but yes, it snaps on the motor housing.
@@Flight6677 Thanks.
I had two cables that were about to break at the factory. Once from the green LED and from the motor. Quality is really bad!!
@@WinterbergerJung89 I suppose there are bad ones out there as well. When you rush to manufacture so many in a short period I am sure one or two will be bad. But none of mine have quality issues outside of a couple of my C189s.
These Micros from RC ERA are nice for the price point. IMO, so far, for cookie cutter Micros the c123 is pretty darn nice/good. You usually do not find a direct drive Micro Heli for 130,00 bucks anywhere on planet EARTH Sorry to disagree with you.
@@jeffkraus1457 I agree. You really need to know the history of RC helis to know that 5 years ago this was a dream for some. Flybarless, direct drive, controllable and smooth micro SCALE heli.