Rusty Deadlocked Arbor Press Restoration - Restoration Videos
ฝัง
- เผยแพร่เมื่อ 11 มี.ค. 2021
- #restoration #restorationvideos #antiquerestoration
Rusty Deadlocked Arbor Press Restoration - Restoration Videos.
I restored rusty deadlock arbor press in the video. "Made in USA" I acquired this rusty deadlocked arbor press from a junkyard nearby ship-breaking facility, I paid around 20 bucks for it. It was the part that i have been looking for a while. I fell in love with it in first sight. I am very glad for getting a chance to restore it. Hopefully you will be glad with my restoration as well. Btw I really wonder what you might be thinking about the new handle, please comment below your opinions. Don't forget subscribe to my channel and like these videos please. Thank you for watching.
Meine Mechaniker.
Thank you for watching. Don't forget to ''Subscribe''
This is my previous video;
1950's Oil Lamp Restoration - Perfect Restoration [4K]
th-cam.com/video/3IH-k8W0Cxg/w-d-xo.html
Are you Turkish or are you living in Turkey
I am a world citizen 🌎🌍😉
Like👍🏼
Thanks
@@meinemechaniker Crafty to play to the U.S. Like you do.
I’m convinced that this guy and My Mechanics are the same person
😅 I take this as a compliment. thank you.
This is the first video of seen of him, but just from this comment he's getting an instant subscribe
It it was the same person, it would be a smart move financially. Most of his subscribers would be subscribed to both channels since they're so similar, essentially turning one subscriber into two.
@@jimmyfleebot I'm not the same person, you can believe that.
@@meinemechaniker Your hands do look a little different... but I'm a suspicious man ha ha. Fantastic channel by the way, love your work. Thanks for making this great content for us to watch.
Great Project
But major mistake at the end. If you are pressing a bearing into a hole, just musst press on the outer ring, otherwise you could destroy or damage the bearing.
What bearing?
The fact that your shop is so quiet you can hear the bolts breaking loose is a luxury i will never know.
😅👍
Thomas there is literally a white noise or some sort of water running the entire video... are you deaf?
Gotta get a quiet place. Great content.
Sonunda bir türk restorasyon kanalı bulmak çok iyi oldu.
👍
I love how silent the video is. So peaceful and calming!
That is one chunky press! It might have cost only 20 bucks, but with all that work, its beauty is now invaluable. Cheers!
I applaud the "new handle" for this press. If using that longer handle then you really need a different tool tbh.
Speaking of needing a different tool ...that bearing in the test needed full diameter support to reach the outer race for pressing. 💡
I live 20 miles from Grand Haven MI where this arbor press was made. Beautiful restoration! I'm sure it looks 10x better now than the day it left the factory.
Fellow Michigander here. I was excited to see the Grand Haven Mich mark, too!
@@ThatDamnFosterKid ooklo
Home of the singing sand on LAKE MICHIGAN and the now defunct WESTBANK bar where my band 24k played in the mid 80's. We slept on the beach or in our 40' school bus in the state park.
Our booking agent's name was Kevin Meyers who is now a professional concert promoter.
I remember seeing large DAKE presses on the COAST GUARD docks nearby.
Didn't know they were manufactured there.
🙂✌️❤
I worked in Grand Haven Michigan and I live in the next town over. It's a great City and Resort town. Great place to visit if you are not from Michigan.
I had a thought while watching you paint the raised letters. Maybe you could try covering the letters with Plasticine or Blu Tack and then using a small roller to roll the plasticine until the letters show through. This would perfectly mask the letter edges and when the paint is dry just peel it away to show perfectly painted letters. It's got to be easier and neater than freehand painting. All the best and thanks for the videos.
thanks for the idea.
Had the same idea with a slight difference in details.
I swear the most satisfying thing in the world is hearing that bolt pop.
Better than the original
Absolutely outstanding, it was like watching magic happen before my very eyes. There must have been a tremendous amount of work that we didn't see.
thank you, you are right. Sanding scenes you watched for 4 seconds may have lasted 1 day.
Great job; I love your attention to detail. You take off the sharp edges, clean even "unimportant" parts/spots, and smooth everything down. I enjoy your work.
Thank you 👍
Catching up on some older videos, this was IMPRESSIVE! The attention to detail and the care you showed while working on this piece was wonderful! The results were fantastic! Be well, be safe!
Thanks 🙏🏻♥️
again a great project, I am watching your work with admiration :) @MyRestorations
👍
Better than new !
You can put clay over the raised lettering, sand it flat to expose metal, paint it , and remove clay to achieve perfectly painted debossed letters.
Mükemmellik detaylarda gizlidir.....ellerine sağlık....
If I had THAT one it would go in my show case and my cheap HF would stay on my work bench. Very nice, thanks for sharing.
Beatiful 👍
19:10 Meine Mechaniker: 👍
Me: AWESOME JOB 👍👍👍👍
🤗👍
You should get a hobby powder coating set and powder coat some of your projects. It will be way more durable than paint. Just an idea. Great job.
Great work again!😁⚒️🛠️
There was more than one arbor press that was restored. Countless number of them were. The only thing that's different is the product's brand name. 💯
You are the best. Far away from the others.
Better than new👍
👍
Great photography !
Pain stripper, rust remover than sand blast?... I love the way you debur the castings, really classy.
@ 17:37 U could do with centring the tool in the holder;... that would save some sanding...
Leave U more time on doing such a GR8 job... 👍
I am particularly impressed bye your attention to small details. Highlighting the lettering, adding the contrasting paint to the polished faceplate, and adding the flag decal to the faceplate. Exquisite work. Thank you for the time and effort you invest in your projects, and sharing them with us.
I love to watch your videos, mainly because you are so very good at restoration. This was really impressive.
Thanks
I've used one of those many times in different factories over the years. You made that piece a thing of beauty.
Your painstaking attention to detail is truly amazing. I literally always enjoy the end results. Thanks!
New handle is much better!
Thanks
Very nice restoration, thanks
This guy is the next "My Mechanics", he is really good. I enjoy all his videos
Thank you ALİ 🤗
Clean & Nice Work.. 👍..😍.! Rotay Gear Part's Need More Grease... For Long Life Tool..!
Restoration perfection! I always treat my tools as I would treat my best friend, so they will never let you down. How anybody could have let that arbor press get into such a bad state is a mystery to me! Excellent job, my friend!
thanks, I think that tool has been forgotten
Beautiful new handle.
I would've Knurled it
Knurled and nickel plated.
Very Nice restauration, the only part im not thrilled with is the crazy amount of scratches visible on the polished parts. In the future i would recommend using higher amount of grid on the sandpaper before polishing for better finish.
Still, the video gets a thumbs up. 👍
Nothing escapes his eyes. I surrendered and you are right.
Good restoration.
That really turned out fantastic. I cannot believe you were able to get it working again without any major parts. The way it used to work you could have got it done without no parts but the way you went was really worth the time and expense. That is actually something you could keep in your home. I know around holidays people put peanuts out this would make a good nutcracker. I just don't know with how good it looks that I would want to use it in the garage. If anything I would keep it on my workbench in the house. That one I don't get so involved is dirty crazy parts I normally do more electrical work in the house on my bench and gunsmithing.
Cannot wait until your next project.
Oh it's so weird seeing Michigan (my home state) tagged in this? Love it though, absolutely beautiful work 😍🖤
Nice. A very common and useful mod for these is to mill or grind the bottom two teeth off of the ram to allow it to ratchet in the full up position. This allows you to position the handle better for leverage.
This is a man who does not like sharp edges, burrs or casting flashing. Well done.)
Very very good restoration. The handle you made was more original. Good luck brother. You are perfect.
Thanks mate 🙏🏻
Großartige Arbeit. Die Presse sieht aus wie neu.
Danke 🙏🏻
That’s pretty much the perfect press to restore right there. I bet it was still a little pricey despite its condition.
@@RAMB0DJOHN Sir, please step away from the crack pipe.
👍
Beautiful job
Mükemmel. Elinize sağlık. Güle güle kullanın.
teşekkürler
Cute arbor press
Beautiful! Everything to perfection! You always go the extra mile to ensure everything is top quality!
terrific 👍🏽👏🏼
gorgeous paint job
🤗
I like the new handle much better than the original.
Another beautiful restoration--better than new!! Excellent touch with the flag! Thanks for sharing another enjoyable episode!!
So focused on small details ! Perfect restoration !
Thanks
Art 👏
Sweet Sweet work my man. 👍👍
🙏🌿🍀
Great job
Я уверена, что эта штука была менее красивой, когда сошла с конвейера во время ее производства! Отличная работа!
thanks
thats absolutly incredible.
Fantastic work! It belongs in a museum now.
PERFEKT...
Your attention to detail is commendable young man. The handle with the threaded on heads on each end plus installing the o ring dampeners under each head was an, as simple as it was, excellent upgrade, thanks for the video sir.
🙏🏻
Шпатлёвки намазюкал от души)))
А подшипник надо запрессовывать за внешнюю обойму!!!
Где там подшипник?
говорит подшипник. кстати, впервые воспользовался. так что признаю что я новичок
Шпаклёвка на функциональности не скажется , лишняя отпадет.
Bizden biri olman çok sevindirici :)
The work you do is absolutely amazing
Εξαιρετικός τεχνίτης!!! Εξαιρετική δουλειά!! ΜΠΡΆΒΟ!! 👌🇬🇷!
ευχαριστώ φίλε. από πού είσαι στην Ελλάδα;
All I can say is THANK YOU? 🇺🇸
🤗
Beautiful restoration! Thanks for sharing!
Nice 👍 job
Gorgeous, creative, perfect restoration. This is why I subscribe to this channel. I truly anticipate each and every video that is uploaded. Thank you so much for your efforts.
Good job !
You're too fast 👍
Love the care for detail!
Really lovely restoration. The modification to the handle was genius - it looks great. Awesome work 👍
That thing looks pretty enough to date!!
Great restoration
👍
You did it again! Perfect restoration.
Congratulations, you completely rooted that handle up by not tempering it again.
True work of art, well done.
first class!!!
thanks
¡Quedó como nueva!....
Colombia /13/marzo/2021.
saludos a colombia
Wonderful restoration! Job well done, and the filming and editing is perfect! 😊
Incredible results! Awesome work.
Tôi không biết đấy là máy gì !? công dụng để làm gì !?. Nhưng khi thấy cái cách Bạn làm đẹp cho nó, thì Tôi yêu nó mất rồi ! Thank Bạn
🙏✌
Un autre œuvre d’art! Très beau travail.
Отлично!!! Только почему бы сперва не почистить пескоструем. Сколько бы времени было сэкономлено. 👍👍👍
IMPRESSIVE job... WOW .. very well done ..
Thanks
awesome. I have a Dake Y press, practically new, that I got from work. They were going to throw it away.
Meticulous work. Glorious results. 👍👍👍
The new handle was so much nicer than the original with those awdul circlip syopperd.
Glad you decided to use that one instead.
Great video and superb restore as usual.
Thanks 🙏🏻🌿
Señor Mechaniker: decir bueno, es decir demasiado poco; sobradamente excelente. Acabado impecable.
Muchas gracias
Another great project and restoration. Thank you for sharing your talent and preserving these little pieces of history.
🤗
Olá !
Esse é o seu segundo trabalho que assisto.
Gostei muito, muito mesmo, está de parabéns, e, como alguém já comentou, a filmagem foi boa e direta, sem encenação que aborrece.
O trabalho no couro também foi muito criativo e bom.
Não sou expert, vou apenas expressar MINHA opinião...
O cabo, embora anatômico, achei que a cor preta não combinou com a cor da bainha, marrom.
Questão de gosto apenas, o trabalho foi monumental. 👏👏👏
Saudações do Brasil ! 🇧🇷
Ola, obrigado 🙏🏻
@@meinemechaniker
Peço desculpas...
Esse é um comentário que eu deveria ter postado em outro canal, específico de facas.
Errei e não sei como.
Agradeço sua elegância em suportar meu erro.
Obrigado.
Abracos de São Paulo, Brasil...
@@antonioirineudemoura991 😅🙏🏻
Wonderful acting ❣️
I like your work style really I am enjoy 🙏🌹
thanks a lot
This is your best yet.