Restoration of a 50 year old Huge Rusty Drill Press. Awesome result!
ฝัง
- เผยแพร่เมื่อ 13 ม.ค. 2023
- I got this drilling machine for the price of scrap metal. The headstock raise/release mechanism did not work, the headstock lock lever was jammed, the drill chuck was rusty and jammed, the on/off button was missing, all the electrics were rewound with duct tape. BUT the motor worked!
Restoration process.
First of all, I completely disassembled the drilling machine into parts. Some control levers were broken and new ones had to be made on a lathe.
I cleaned the parts of the hull using a paint remover and a rust converter.
I really like to use hammer effect paint on the body parts. Since the case is made of cast iron, it has an uneven surface and it is the hammer effect paint that hides all these irregularities, while the spray paint would only emphasize all the flaws.
During the repair was completely moved the engine. Rust was even on the rotor! Replaced all bearings and painted body.
The bearings on the spindle were also replaced!
In general, the work was not difficult but took a lot of time, and I will be grateful for the "thumbs up" pressed so more people will see the video and I will compensate for the cost of repairing this drilling machine! THANK YOU
I enjoyed working on this project, and upon completion, I had another "helper" in my workshop, who will often appear in the following videos.
So click "subscribe" and be sure to "bell" otherwise TH-cam will not notify you about the release of a new video.
Good luck everyone and take care of yourself!
Sincerely, Max!
#awesomerestoration
#drillpress
#restoration - แนวปฏิบัติและการใช้ชีวิต
![[TH] VCT Pacific - Regular Season - สัปดาห์ที่ 4 วันที่ 2 // T1 vs ZETA | TS vs TLN](http://i.ytimg.com/vi/QKGUHmA6gwY/mqdefault.jpg)
Thanks!
David, thank you very much for your support! I just recently connected this function (Thanks ❤️💲), and you are the first one who supported my channel financially !!!! I'm happy 🥲!!!
@@ITBR_Restoration
Mjhgg
@Restoration In The Back Room
This press has worked like a charm for my projects th-cam.com/users/postUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!
Молодец дал вторую жизнь станку и продлил память о СССР.
🤮
Well done!! I like the choice of a hammered finish to hide casting imperfections. I also applaud your use of sealed bearings to replace the old open bearings in the motor and in the spindle. I'm glad that the quill was in good shape so that you didn't have to tackle restoring that, they can be a real pain. Overall excellent workmanship.
Now there is the addition of a much needed tool! Marvelous!
Great job it's good to see machines get a refit instead of throwing it away in this world of ours of just buy a new one
Regards
Steve UK London
Thank you. This machine is very old, but it is of excellent quality, it has an excellent margin of frame rigidity and engine power. I think that a modern analogue will cost quite a lot!
Very nice to see this old machinery get a new life.
Wonderful restoration, even without the decals, and you have it working nicely thank you.
К нижеупомянутым не аутентичностям я бы еще добавил шильдик, нужно было тоже восстановить. А вообще - Отличная работа!!!
Все три таблички (большая с названием, средняя с оборотами и маленькая «заземление») заказал на Авито еще перед Новым годом, где то еще едут.
Спасибо.
@@ITBR_Restoration Прямо от сердца отлегло, так расстроился за шильдики.
Great job! Lada gearshift knob😊
Fabulous restoration
Nice refurbishing project. Every shop has to have a drill press. You did very good making it look great and run well too... Thumbs Up!
thanks for the support! You are right, it is difficult to do without this machine in the workshop.
Gorgeous work
Nice job. I’ve always been afraid to re-do older industrial type machinery but you make it look easy 😊 Thanks for sharing.
I also did not dare to disassemble this machine for a long time, but in fact there was nothing complicated. But it took quite a long time.
I am sure you will succeed.
In my experience the only thing to be afraid of is a murderous, drunken step-father.
After that everything else is a minor inconvenience and, can be quite fun!
Mis felicitaciones por esa restauración y darle nuevamente vida a ese taladro,saludos desde Argentina
Thank you for not making 1/3 of your video sandblasting. Love the colors you picked.
Thank you for watching. I also got fed up with the sandblasting footage in the video.
Amazing work!
Very Beautiful! I like how U cleaned the wiring with the addition of a clean on/off button. Nice color combination. U turned it into a usable piece of art
Thank you! In the workshop, this machine is a very important element.
Splendid job. I would have retained the gear-lever knob as a souvenir. :)
Nice job. Maybe this will get me to fix my drill press. Thank you.
*_Better and much more beautiful than new!! Good job_*
👍👍👍😉
Просмотрел не отрываясь,это не работа,это симфония!Эх,повезло станочку,в такие ручки попал!
Спасибо за добрые слова 👋
Excellent job.
Собрался уже поворчать на некоторые небрежности, потом увидел, что это восстановление не для понтов, а для работы. ))) А про провод вам уже написали.
Тоже люблю покрытие молотковой эмалью.
Красиво получилось!
Спасибо за комментарий!
Действительно, делал для себя, для частого использования, поэтому некоторые моменты во внешнем виде, упущены.
Excellent job and an inspiraton for us all. You did not use fancy tools in the renovation (except a lathe perhaps and a sand blaster) ...you show what can be done with effort. Well done.
Thanks for the words of support. In my first videos, I used the smallest set of tools (I only dreamed of a sandblaster and a lathe). So you are right, with a strong desire, you can work with the simplest tool.
Great job. What kind of grease did you use, never seen blue grease before.
Great video.
Excellent restoration
Thanks 🙏🏻
Молодец!Очень грамотная покраска и сборка!
Well done! 👍🏼
Im just about to restore a very similar one! Thanks for the inside look before I take mine apart :)
I'm glad you found my video helpful.
Very nice restoration
Looks great, I like the design of the head moving up and down rather that just the table on mine.
👍👍👍
Masterfully done - stunning results! I love to see what appears to be “junk” restored to original condition & purpose. Thank you!
Работа хорошая. Возможно стоило сделать полноразмерный кожух на верхнюю часть станка, а не ограничиваться щитком спереди. Так же отмечу довольно опасный изгиб питающего провода идущего в блок с кнопками управления, в относительной близости от вращающихся деталей.
Спасибо за вашу оценку. С завода изготовителя у этих станков устанавливался именно щиток спереди (была другая форма, в виде перевернутого чугунного горшочка), поэтому решил что для личного использования мне достаточно и щитка.
Кабель довольно жесткий и я надеюсь не будет, (без посторонней помощи😁) лезть во вращающиеся детали 😁
Quality work
REALLY GOOD WORK DUDE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Awesome always cool stuff always thanks 😎
Просто потрясающе.
Excelente trabalho !!!
🤗🤗🤗
Great restoration job and has given me some food for thought. I'm part way through the exact same thing myself on an old large format, heavy duty pillar drill I was donated by a late friend. My problems are that:
1. Mine seems to be considerably heavier with a massive cast body weighing about 20kg stripped of all parts!! The drill fully assembled was a real struggle to get up on the bench to dismantle.
2. It has a 60cm column which took a LOT of persuading to separate it from the body but now the large cast iron base collar won't budge. I think it is going to have to have one of my special citric acid baths for several days then the old heat and candle wax trick to separate it.
3. There is no base and no table, plus no rack/pinion lift. Consequently I'm having to think carefully about what to use. I'm currently thinking of a thick piece of granite for the base as finding a cast iron one seems remote as well as prohibitively expensive. Even a 1" steel plate would be quite expensive whereas I can get granite offcuts fairly cheaply and drilling using diamond core drills is no problem at all. Counterbores are a bit challenging but even they are not too bad.
4. The lack of a table and no rack and pinion lift also needs addressing and a retrofit of some kind seems inevitable. I can live without a table IF I can get/fit a suitable rack and pinion to take what will be approx 40kg with all the bits and a motor mounted
5. I never had a motor with it but I have a VERY good condition, as new, 3 phase, 2.5 HP motor that I plan to use with a suitable single to 3 phase 5HP capable VFD I already have.
6. The large 1/2" Jacobs chuck that came with it was rusted solid but that was citric acid soaked for a week and then stripped & cleaned and now looks really good.
6. The quill seems in good shape but I plan on replacing all the bearings as you did and using proper rubber sealed units. I can never understand why companies fit steel sealed or even non sealed bearings when, even retail, bearings are so little cost.
7. The quill return spring proved to be broken on dismantling but a new one was easy to obtain from Ali Express.
I wish I had access to a sand/bead blaster like you have. I could do a great and quicker job of stripping all the bits back to base metal rather than wire brushing/flap wheeling/Scotchbriting that I have to do. I just have to dedicate some time to it once the weather gets a bit warmer - my shed has no heating and it's been -4°C during the day which is VERY cold for the UK at this time of year.
Once again, a great job done and a really nice set of paint jobs and overall restoration! I hope mine turns out as well.
First, I'm amazed at the text size of your comment.
YOU have spent a lot of time to write all this, you have great patience (unlike mine 😁)
Secondly, you are right about the sandblaster. It makes the job much easier and faster. If you watch my earlier videos, I mainly used electrolysis to remove rust, as well as a brass brush and grinder attachment.
Thirdly, working in the cold is not at all pleasant. Although my workshop is heated, but when it is minus 25 Celsius outside, the temperature in the workshop drops to plus 10, and I don’t feel like doing anything with my hands at all.
I am sure you will succeed with your machine, you can handle it. And when you're done, I'd love to take a look at it. Can you send a couple of photos by email? My email is in the channel description.
@@ITBR_Restoration thanks and I certainly shall! 👍
Excellent work Bro.⭐️⭐️⭐️⭐️⭐️
Thanks Bro!!!👍
MAGNIFIQUE!!!!!!!!!!!!!
You have to show the sand blasting.
It will bring you a lot of subscribers.
Well done
👍👍👍
Très beau travail de restauration et bien filmé. Félicitations !
Merci d'avoir regardé et pour votre soutien !
Well done.
Excellent travail, BRAVO ! 👍
Хороший станок! Отличная работа!!! 🤝🤝🤝
Благодарю за поддержку! Я долго откладывал ремонт этот станка, но он мне сильно пригодится для создания следующего видео.
@@ITBR_Restoration Уже весь в нетерпении ! 👋😁👏👍
essa pintura a mão ficou sensacional
This was Epic ... respect.
Thanks for support!!!🙌🙌🙌
Muy buen trabajo. Felicidades.
¡Gracias por mirar y por su apoyo!
Проделана хорошая работа. Единственное, что я бы советовал: при сборке использовать не пластичную смазку, а ту же веретенку (индустриальное масло). Это обосновано тем, что при работе на станках образовывается пыль (помимо стружки) из тех материалов, которые обрабатываются. Она очень хорошо загустевает в пластичной смазке и коксуется в одних местах и изнашивает движущиеся детали в других местах. Некоторые узлы лучше и вовсе не смазывать (патрон токарника, например), либо смазать твёрдым графитом.
На тех же Волгах старых шкворни лучше смазывать жидким маслом, чем пластичной смазкой (по тем же причинам что выше описаны). Допустим при следующем цикле ручной смазки ты прокачиваешь или проливаешь узлы жидким маслом и все гадости вымываются постепенно (можно, конечно, и проникающими смазками аля ВД40). Это все, конечно, при условии, что узел не защищён пыльниками или сам по себе не является герметичным.
Насчет смазки токарного патрона категорически не согласен. Также не согласны мои патроны, в т.ч. Bizon, имеющие масленки с завода для смазки передней части улитки. А внутрь патрона, со стороны сателлитов, закладывается консистентная смазка.
Ficou perfeito, parabéns
У тебя тиски есть, а ты подшипники садишь ударами молотка.
И посадочные места под валы и подшипники красить - так себе идея.
Но всё равно красиво получилось. Лайк.
Ну просто респект и уважуха за такую работу)))
Спасибо 👍
Good job.
Молодец, Крутая работа, но нужны инструменты посовременней, и зря не показал монтаж и подключение проводки. Продолжай в том же духе!!
Спасибо! Инструменты потихоньку подкупаю👍. Проводку не стал показывать, показалось что там ничего интересного не было.
It would be great to see the sandblasting. It's one of the best things to watch
super travaille et bon montage vidéo ! bravo !!!
Спасибо за просмотр и поддержку!
thats very impressive😮
Thanks for your support!
Perfeito parabens
отлично получилось, я в прошлом году на металлоприёмке почти такой же станок купил, только без мотора и состояние на много хуже, но ни чего работает уже )
Отлично👍!
Меня поражают люди, которые сдают на металл такие вещи!!!!
Прекрасная работа!!! Но подшипники стоит проверять на присутствие смазки. Я обжигался на этом.
Спасибо за поддержку! Подшипники покупал не из дешевых))) поэтому надеюсь на совесть производителя)
Excelente, muy bueno
👍👍👍
Работа отличная Удачи!!
Спасибо за поддержку! Вам тоже желаю удачи!!!
Fantastic restoration good for another 50 or more years I'm a new subscriber...
Thanks for subscribing!!! On Monday or Tuesday I will post a new video, I will be glad if you watch it !!!
Ой, если честно, я прям заждалась ваше видео🙌🏻. В этот раз чуть позже обычного опубликовали. Работа отличная, прям новую жизнь дали этому прибору 🤟🏼👍🏻💫
Вибратор - это прибор, а на видно станок.
@@vladanufriev вам виднее 😂
@@lavotaro у вас станок, у нас прибор 🤣🤣🤣
Looks very similar to my Craftsmen drill press. "Restoring" mine required just removing light surface rust.
Bel lavoro e vernici appropriate 👍
Ótimo muito bem trabalhado 👏👏👏👏 Br
Спасибо ☺️
olá brazuca
Maan, that was one Frankenstein of a drill. The shifter was cool though.
Great job on a real beat up drill press. I think you should try to make a better belt guard though
Should have maybe just power washed the whole thing before taking it apart - less work.
Very awesome work! Good to see you wear gloves when necessary but not afraid to show you get dirty (or injured).
In older videos, the subtitles are in cryllic or are missing. Would it be possible to go back and change that?
Thank you! It is very inconvenient to work with gloves, but sometimes you simply cannot do without them.
In which of the old videos did you have problems with subtitles?
great job !!!
whenever you want to put a bearing on a shaft, the BEST solution is to heat it at 80 deg C with a hair dryer or a heat gun (no flame, torch...). it will slide on that shaft very easily. at that temperature no damage it is done to the bearing !
why you didn't sandblast also the other parts ?
Very nicely done, although I think I would preserve every plate with writing on it that was on the machine.
Don't worry about the labels. I installed all the new ones and posted a photo in the "Community" tab, I will be glad if you look !!
@@ITBR_Restoration Very nice!
В СССР техника делалась на века! А если еще чуть поработать напильником получится - гранатомет!
Это точно 😂
great job on 1969 kamunaras drill press restoration awesome results restoration in the back room 😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍
🤗🤗🤗🤗🤗🤗🤗🤗
Very good
Thanks 🙏🏻
Отличный станок получился. Теперь я знаю каких деталей не хватает на моём точно таком же.
Nicely done. If we're me though, I would have gone looking for two more bear shift knobs...
😄
Все отлично, но выбивается не аутентичные пуск/стоп.
Спасибо. Аутентичные сейчас в дефиците))), не смог найти.
Отличный станок!! Отличная реставрация!! Стал лучше чем новый!!!! 💯🔥
Спасибо за просмотр и поддержку👍👍👍
Прекрасно, Макс!
Спасибо ✊
Thanks!
David, thank you very much🙏. Thanks for supporting my channel! This is really important to me in this difficult time🙏🙏🙏!
The old girl lives to fight another day, it came out beautifully
Человек славно потрудился!!! 👍✊ Вопрос: что за смывка (возможно неправильно назвал) в баллоне?
благодарю! смывка краски "Dekorix", только ей и пользуюсь.
@@ITBR_Restoration 🤝
Great restoration man! Love the hammer effect paint!
EDIT: Subbed.
Hammer effect paint always looks great on cast iron and melted parts .
If you paint a cast-iron product from a spray gun, then you emphasize all the surface irregularities. And the hammer effect paint hides all the flaws.
НС-12 очень повезло, хорошая работа!
Спасибо за оценку 👍
You should use hammerite paint looks really good
Yes thank you.
Incroyable
🤗🤗🤗
Great job as usual thank you for the video.
Thanks for watching and for your support!
Just wondering where one would find sockets with swivel handles?
Very nice. 👍. Did you use a wire brush to remove the green paint?
Great job, what lathe are you using🤔🤔
кожух защитный плоховат.можно было полноценным сделать.Да и детали лучше в тисочках зажимать, а не в клещах.А в целом работа супер !
Awesome result? No! Reasonable result? Yes.
The hysterical movie soundtrack doesn't really add to the "awesome" effect. 😋
It’s perfect
Thank you)))
Auch wenn du ein Russe bist? Super gemacht! Du hast es wieder bewiesen das Mann aus Sch…. Gold machen kann! 👏🏼👍🥇
Mach weiter so und bleib gesund 🍀
Как раз и меня есть точно такой-же, работает отлично,
Тема шпинделя не раскрыта! ) Я тех подшипников рот шатал!