Sounds healthy, this is the turbo cam..? I just put a 78/75 on my car, and need to swap the blower cam with a more suitable one. Have you added boost yet..?
I have not. Take this info w a grain of salt bc I’m just going off of my circumstances. I spoke to someone from on3performance and they mentioned I run a 78mm turbo no smaller than 76mm. Hope that helps. If you already have a turbo setup I’d just call TSP and see what they recommend. And yes this cam is built for turbo applications.
@@6spdinc thanks, I'll definitely look into it, and I already have a VS Racing billet 78/75, with my old blower cam from the p1 I had! It needs changed and I need an intake! I wish a TBSS intake would fit under 4th gen Cowl!lol
I strongly recommend replacing the valve springs, push rods and a trunnion upgrade for the rockers. I also replaced the timing chain and a handful of other things recommended during a cam swap.
@@6spdinc lol. Nah man. I’m no 16 year old looking blame or hold anyone to what they said lol. I’m was just looking for advice. Thanks for your video! I grabbed a Texas Speed package for a 5.3 LSA I’m putting together. After calling and taking to a tech. Thanks for being communicative
Leroy Oliver I’m very pleased with this cam and the corsa catback so far however haven’t had much time to drive it yet. This week the car is getting properly tuned so I’ll be sure to post up a Vid for you guys to show drive ability / practicality.
No complaints. Mild and streetable cam. Cam alone w basic bolt ons put down just under 400hp on the dyno. I plan to go w a on3 turbo system not too far down the road. We’ll see what happens lol.
@@6spdinc I have a 2007 Silverado 1500 6.0 4x4 doing the 4l80 swap out now and going with tsp stage 2 Turbo Cam. Not sure what size Turbo I'm going with yet. Still kind of doing my research on cams. Looking for something that brings the power on between 3000 - 7000 rpm. Nice car by the way sounds great
![ทางเดินชีวิต - ธีเดช ทองอภิชาติ x อ.ไข่ มาลีฮวนน่า [Official MV]](http://i.ytimg.com/vi/1f3wcG16dd4/mqdefault.jpg)
Nice
I just got the same cam.Rebuilding my lq4 that previous had a ljms stg 2 cam before.Anxious to hear your thoughts on this,what was your previous cam?
Torched T/A Entertainment Hey nice!!! Look forward to a vid of yours. This is the first cam for the car but so far I’m very pleased!
Sounds healthy, this is the turbo cam..? I just put a 78/75 on my car, and need to swap the blower cam with a more suitable one. Have you added boost yet..?
I have not. Take this info w a grain of salt bc I’m just going off of my circumstances. I spoke to someone from on3performance and they mentioned I run a 78mm turbo no smaller than 76mm. Hope that helps. If you already have a turbo setup I’d just call TSP and see what they recommend. And yes this cam is built for turbo applications.
@@6spdinc thanks, I'll definitely look into it, and I already have a VS Racing billet 78/75, with my old blower cam from the p1 I had! It needs changed and I need an intake! I wish a TBSS intake would fit under 4th gen Cowl!lol
Turbo cam without a turbo??
Sound great. Was looking into this Cam. Did you have to change the Valve Springs?
I strongly recommend replacing the valve springs, push rods and a trunnion upgrade for the rockers. I also replaced the timing chain and a handful of other things recommended during a cam swap.
@@6spdinc thanks for the replay 😀
@@6spdinc I ordered everything you suggested. Thanks !
@@OhMar1210 Don’t hold me to it lol. That’s all good stuff brother. Goodluck w your build!
@@6spdinc lol. Nah man. I’m no 16 year old looking blame or hold anyone to what they said lol. I’m was just looking for advice. Thanks for your video! I grabbed a Texas Speed package for a 5.3 LSA I’m putting together. After calling and taking to a tech. Thanks for being communicative
I got the same exhaust....was trying to decide on the cam for it in the next week...how is it
Leroy Oliver I’m very pleased with this cam and the corsa catback so far however haven’t had much time to drive it yet. This week the car is getting properly tuned so I’ll be sure to post up a Vid for you guys to show drive ability / practicality.
Update how is everything? Looking into this cam
No complaints. Mild and streetable cam. Cam alone w basic bolt ons put down just under 400hp on the dyno. I plan to go w a on3 turbo system not too far down the road. We’ll see what happens lol.
@@6spdinc I have a 2007 Silverado 1500 6.0 4x4 doing the 4l80 swap out now and going with tsp stage 2 Turbo Cam. Not sure what size Turbo I'm going with yet. Still kind of doing my research on cams. Looking for something that brings the power on between 3000 - 7000 rpm. Nice car by the way sounds great
What's the stall on your converter?
Brandon Fortune No stall it’s an M6. 👍🏻
Without a turbo ??
Turbo system coming 2021 lol. Cam is small enough to run n/a. 👍🏻