But if it wasn't used, I would think it still should do what it said it would do (given Kicker is a reputable brand). It's not as if it had shelf life and degraded by sitting around.
This amp started my career (still in) in the automotive industry. My dad took me to a car audio shop when I was 15 and bought this amp and the 100si. Ended up in Car Audio & Electronics magazine (May 1996). My first system I ever installed
Fo sho, I thought about it, but the hex bolts still had the OG paint on them and I didn't want to disrupt the look. These are hard to open up as you know.
He doesn't want to void the warranty bro.....geez. He didn't even send the warranty card in! LOL could you imagine sending it in for warranty repair? I bet you get a different amp back!
I wonder how many people were looking to buy an amp , stumbled across big D , watched a couple tests , then subbed , and now watch every single "episode (?)".
im still using a kicker 100si that I won in a sound comp back in the 90's. it definitely doesn't look as good as that one and the plastic trim got lost during one of the many times I loaned it out. But it still does the job.
One of the selling points of these Amps was being able to Hide the Wiring for a "Clean" Install. Especially in cars with rear deck lids, you could have the Amp on display and no wires showing through the rear window. That is why Kicker let the installer cut out that part of the cover for the wire install.
I still have a C10 Kicker subwoofer, using since 1997 and i like very much, low fs and easy to drive, very low frequencies from a 4th bandpass in my beetle!
It's crazy how much better looking the old amps are! Some of these new amps out today look all plastic and junk but this piece right here has a professional look to it!
Badass amps. These are what got me into car audio. Seen a system with just two of these amps, one running 4 kicker 12s and the other running 12 mids and tweets. Crazy!!!!
The section that can be broken out is left in if you wanted to back wire the amp so you don’t see the wires 👍🏻. Kind of like my 90’s Fosgate amps, you had to back wire the amp to put on the end covers so you’d have a clean looking install. One of my good friends owns Custom Enclosures Car Audio in Bristol VA and back in the days I’ve seen quite a few installed by him that way. Beautiful amp in perfect condition and it works to boot!
The "breakout plate" was an option so you could have the wires hidden by going out the bottom of the amp, which was in the amp cut out template. If you didnt want them to be completely hidden you could break off the breakout plate and have the wires come out through the front instead.
I know Dereck's feeling of joy getting this amp. I just scored 2 USA made JBL GTX 15" subs circa 1995 from eBay. Were listed as mint condition. In reality they were brand freaking new, never been mounted, in original boxes with the manuals! Back in the day these subs were the bomb. I had a set in the high school days and needed them again... You know what I mean!
I'm 16 wish I could have been there I've always grown up hearing abt my dads Camaro and how crazy the OG kicker solo barrack's were so I got the 2020 versions and I truly wish I was alive when this was big
@@tenacious5735 I was 16 in 1996, and it was a dream to own this stuff. Worked forever at minimum wage to buy anything. And then, you make dumbass teenager mistakes. Like when I finally bought a 300 watt class d MTX amp, and then 6 months later allowed it to get flooded with water 😢. At least you young guys can buy better beat than we had. Also, we burned up batteries and alternators quite easily. Everything ran hot in those days. The average car had a 60 amp alternator or so. We always ended up abusing the cars electrical system because of it. Rough times lol
The plate not being broken out from the factory is because it had the holes in the bottom of the amp to run the wires hidden instead of running out the back. If you look at the cutout template it shows you the cut pattern for running the wires hidden.
YEAH BOI! Got to love it when you find an amp in that condition and carefully shipped - nice find! :D And it works - sweet!!! It bump doe very nicely in Tri-mode. KICK'N IT OLD SCHOOL STYLE!
I remember back in the early 00s I traded my jacked up 1994 Eddie Bauer Explorer on 33x12.50s for a 1992 Acura Integra, a set of 17" chrome wheels (which were REALLY cheesy), a Soundstream Rubicon 4 channel 1000w amp, and four Kicker Solobaric 10s. I remember the motors on the subs said Stillwater Designs on them. They were definitely old, but my cousin was owed a favor by a local stereo shop and they built me a custom fit box for the hatch area. Those subs sounded SO good and hit fairly hard. I remember that I had a Sony (the ONLY car stereos that I would buy back then) Xplod tape deck with a Sony 10-disc CD changer. I even had an old Sony unpowered tape deck with a motorized face that folded down to expose the tape deck and I had a Sony 4 channel amp that went with it. I also had an old red anodized US Amps 125x4 that was .25 ohm stable with a plexiglass bottom and about 4 feet long. When I was in high school I had an 89 Chevy Beretta GT with two Image Dynamic amps and two Image Dynamic 15s and people at my school said that it sounded like thunder. I shattered my rear windshield in front of the school one day while I was leaving the parking lot and I was suspended for 3 days because of it.
I also loved the tape deck and cd changer setup. Mostly because tape decks were not prime targets for theft. It was awesome. Listen to anything, make mix tapes and in a beater car, nobody knew you were packing
200si is the one I let get away! I was about 18 and bought one of these (so it was a 5-6 year old amp) from a friend for $200- I was 'using it' and basically the bass made a couch fart sound prior to the main fuse popping and smelling the magic smoke. I used it for maybe 1 year. Sent it to Kicker for repair, they wanted $200 plus return shipping to fix an amp I spent $200 on, so it I let it stay with Kicker. In my case, the vehicle didn't have enough alternator output to keep up with that amp, and the amp in turn tried to pull more current to sustain the load. This created a real hot spot right at the voltage input and return, so hot it caused the plastic and 8 gauge wire jacket to melt right at that input on the amp. Who knows, it could have been an insufficient ground as well. Gotta love those first systems.
I had a Sansui, 2 channel 75 watt RMS car amplifier from the late 80’s/early 90’s. All it had was one sensitivity adjustment, power in and RCA plugs. A simple no frills plug and play amplifier. I wish I had that amplifier today. Great Old School amplifier that kicked ass. We didn’t realize how great some of the old school car stereo products were from Japan until manufacturers first started making lower quality products made in China. I wish I still had my old Nakamichi head unit made in Japan, along with my old school Boston Acoustics 6 X 9 speakers. Today I have all JLAUDIO that is dated. Older. JLAUDIO Slash series A/B amplifier’s, 4 channel and 5 channel with JLAUDIO speakers and sub. I am keeping those.
My dad had an awesome Sansui home receiver he brought home from Vietnam. “100 watts per channel”. Yeah, right. No full size old school floor speakers could handle it at half power. I would crank it after high school before he got home. What killer sound and quality
Same happened to me when I ordered a Kicker Impulse amp years ago. wasn't supposed to work, but with the exception of a fussy gain control it works great!!!
Lol, watching this takes me back to High School. My buddy had a Kicker amp, and one of those Stillwater Designs SS boxes. It had 2-12" s with a set of mids, and tweets. Had a house stereo style speaker grill made of nylon. Good times back then.
FYI i have been watching your videos for about a year now. I have never owned a car amp 😆 or a car hi-Fi of any note. Love your videos. Keep up the good work.
This is a testament to the quality components Kicker used back then. Cheap caps would have probably failed by now. You should do a custom retro install in your vehicle. Would probably look dope. And sound even better.
Very nice! Another good vidya from mah boy Bid D. I find it interesting how good that sounds with how little power it puts out. Definitely not competition level output, but still very impressive. Thanks Big D!
I bought a ZR240 from someone in California for $50 was also mint and had the SWS (subwoofer module) with it. They said they didn't know if it worked so I messaged them back after I hooked it up letting them know I was very pleased with my purchase. 3 years later I ended up selling it for $450
I bought the model down from this one. 160si or 120si. I cant remember. I saved all my money from working minimum wage. It was the first part of my system I bought. It ended up blowing. I contacted kicker and they offered me the current model up from it for just a bit more money. Think it was the SS line. It was an amazing amp.
The power & protect light extenders are ,east to be seen from the top of them. They’re made from plexi & just work like an extension to the top of the amp cover. With the cover on you will only see the tips of those extender rods from the top of the amp & wire cover. Killer new amp Brotien!!!
Awesome video man! All i could think about is my old x50s competition i had and then you mentioned at the end that you tested one! Im going to look for that video now!! Again thanks for the trip down memory road!! Keep the awesome content flowing!! Respect from Canada brother!
I had the original 200si. This is the revision with the increased input sensitivity gain. I used the KEQ module with 6db active bass boost(double output) pushing two grey 8ohm solo baric 12s in bridged mode. I used 90 degree rca cables from underneath so not to break the tab on the cover. I had the 200si, zr120, 40ss, and 50si daisy chained with crossover modules creating bandpass points.
I went to an estate auction about 2 years ago and the dude used to own a car audio shop, all the speakers where junk but I got 4 Precision Power 800W amps brand new in the original box for $100!! Best deal I ever got! The lady was like "Get this junk out of here" lol!!
Wow, beautiful piece of equipment. Looks like a a/d/s PQ10 . I remember these series amps from back in the day. A car audio shop called GO- HO Audio in the Tidewater of Virginia sold these. They carried Alpine, a/d/s, Kicker, Kenwood, Sony and Rockford Fosgate. They were considered the hi end shop in our area.
I have a really old video showing when I got a PQ10, you can see it here: th-cam.com/video/2ace5lWpvDg/w-d-xo.html I also did a test on this amp on my 2nd channel here: th-cam.com/video/LfZA690qOLw/w-d-xo.html
@wal I'll check it out. It's amazing how some of these pieces have survived through the years. I'm sitting on a PQ- 10, PQ -20, PH-15 and a brand new pair of a/d/s 300is plate speakers with instructions and templates. The box is just worn out. Still have my Kicker ZR360 and ZR600. I have a pair of Soundstream SPL-10's And last a pair of Rockford Fosgate pwr-412. I'm actually going to build a box next week for them. Bro keep up the amazing videos. They keep young at heart. I'm 52 yrs old and I've been into car audio since I was 16yrs old. One day hopefully I'll run into my dream amplifier, which is a Soundstream MC- 500 or a MC-300.. Soundstream MC & Reference series and Rockford Fosgate DSM are favorite amps of all time.
yeah i remember those modules. they used them all the way into the ZR amps. those ZR's were great amps. expensive, but usually way more powerful than rated, even the 120's bumped lol
One of the first amps I tested when I got my Dyno was the ZR120 Old School Kicker ZR120 Amp Power Output Test SMD DD-1 o'scope th-cam.com/video/e1oh1QbNCLs/w-d-xo.html
I thought so to and it IS an A/D/S made for Kicker I'm guessing, not sure why big D didn't say anything, I'm about to ask him. Go to .41 in the video where he is showing the Ad in the 94 directory at the bottom of the page you see A/D/S. I as well had a P80, P120, and a PQ15.....
Tri-way crossover, I remember reading about those, even understood/understand how they worked, but your video is the first time I have ever actually seen one. I think I understand why Kicker made it to where you have to break out that plastic on the cover. If you look at the install template, there is a section for "Cut Along dotted lines for hidden wire mounting" I suspect you could bring the wires in from the bottom and just leave the plastic piece there for a super clean look! That would have been super slick!
@ 1:28 . Fun fact , when using the " a super knife " never shift yourself into a flashback . When returning from said flashback there is a 28.3 percent chance u will get disoriented and scratch a heat sink or a finger
Kicker L7R Quad Box! See the Quad Box video here: th-cam.com/video/mZceqPLn1lY/w-d-xo.html Download the Kicker Modules Article: is.gd/199510kickermodules See my first SPL Run here: th-cam.com/video/JUNlnRccI0Y/w-d-xo.html **Update** See my quest to 140dB: th-cam.com/video/oYtz-VJ7rJ0/w-d-xo.html 1995 KICKER 500ss Amplifier: th-cam.com/video/S8VB1UCGUe4/w-d-xo.html 1997 KICKER ZR120 Amplifier: th-cam.com/video/e1oh1QbNCLs/w-d-xo.html 1996 KICKER X50s Amplifier: th-cam.com/video/pAnp05mIx3Q/w-d-xo.html Like these old school amp videos? Support me for more like this. www.patreon.com/OldSchoolStereo Shop for Down4Sound Amps: is.gd/D4Samps Shop for Savard Hi-Q Subwoofers: amzn.to/2Nh1qcf Check Out My 2nd Channel: www.wheeliewilliston.com See Old School SPL Challenge: facebook.com/groups/oldschoolspl2019 See my playlist of cheater amps: th-cam.com/play/PL6519F5277A57F8BA.html DISCLAIMER: This video and description contains affiliate links, which means that if you purchase from one of the product links, I may receive a small commission. As an Amazon Associate I earn from qualifying purchases1997 KICKER ZR240 Amplifier: th-cam.com/video/kr9Ebng37us/w-d-xo.html Video Index: 0:00 Intro 1:16 Unboxing 2:46 Wow MINT! 5:54 Amp Module 8:06 Replacing Fuse 11:04 Does it Work? 14:02 Amp Dyno Tests 16:58 Do it Bump Doe? 20:29 Extras
That break out piece was depending upon mounting. If you wanted to hide the wires you would run them down through the bottom and keep that piece there to give a clean look to the install.
That amp is mint and clean love it.. Wow now about price. It was very expensive for what your getting back in the day back in 1994 when my Dad's old 94 Buick Roadmaster was new.
I suspect the cutout on the cover plate is optional based on how you route wires. If the wires pass through the vanity panel the amp is mounted through and you use right angle RCAs, some owners may not want the large opening showing on that face of the amp and the wires would be hidden/stealthy. Nice snag on this amp!
I remember when I was about 12 or 13 (1993-94) I wanted to get that kicker logo tattooed on myself. Glad I grew out of that by the time I was legally allowed to be doodled on. Loved kicker stuff
I had one of those style crossovers made by Cerwin Vega. It was the original way to hookup 2 satélites and 2 subs. I made 2 sub cabinets same color and width as a pair of Bose 301 and converted them into lar power handling big bass speakers.
Kicker, Rockford and others used to be like muscle cars in the 60's way under rating their horse power. I was into car audio from about 1996-2000 and amps where always crazy powerful, I remember always smoking subs with a good Kicker amp.
Tri-mode was awesome for us broke guys, ran Pioneer GM-H50 and then GM-H100 that way. A cool test would be power outputs through the tri-mode! Very cool stuff Big D
I had gmh 100 50w×2@4ohm and the gmh 200 100w×2@4ohm, but the 200 had two 30amp fuses and three power supply (1 4 fan) but I never understood the difference between bipolar & mosfet. The fact that it didn't come with a crossover made me go to the 921 kenwood and a sherwood bp 240 and to this day I've never heard a cleaner pioner amp for 4 6×9. Good times
My first nice amp would have been a 500si, but my dad sent it back not realizing it was mine as I had it under the business name 😞 that being said I called up Speed & Sound and explained, but also decided to go with my other pick instead which they were ok with. A Hifonics gen x Zues. Glad I ended up with Hifonics gen x amps after all 👍 Yet still ran Kicker comp 15's and later 18's which were beast in the mid 90's
Dang thats so cool... like early 90s IASCA- SQ. Put an audio control EQ infront of the amp and youre all set. LOL at those efficiency numbers, I don't think anyone even cared about efficiency back then. thanks Derek!! Shout out to Jessica too!!
There is a car audio store in my town that’s been owned by the same guy since I was a kid. Now in my 30s. He has quite a few never used old school amps in the store still. He will sell them but he wants crazy money for them. Wish I could afford them. I’d buy them all. Lol
I can only imagine how sweet that old ab would sound in an sq setup on the subwoofer. I swear i can tell the difference in d vs ab, even on a subwoofer. Im a broke a$$ basshead, so i use class d, but if i had this amp, id give up several db.❤❤❤❤
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
I remember lusting after the 500ss back i the day. I would study the crutchfield catalogs for hours.
+1 so many hours spent lusting over all the good stuffing there!
Dang near thirty years old still does it’s rated power that is just amazing good quality amplifier built by kicker !!!
Agreed!
Spoiler! :-)
But if it wasn't used, I would think it still should do what it said it would do (given Kicker is a reputable brand). It's not as if it had shelf life and degraded by sitting around.
@@mr.c6674 actually caps do lose some life over years typically just like all electronic do
They always were a love of mine, those and Rockford. They always had easy on the eye amplifiers.
This amp started my career (still in) in the automotive industry. My dad took me to a car audio shop when I was 15 and bought this amp and the 100si. Ended up in Car Audio & Electronics magazine (May 1996). My first system I ever installed
👍
What was the car?
@@Onewheelordeal 1991 Grand Am
I was watching this amplifier on ebay. You beat me to the purchase. Thanks for sharing such a GEM 💎
I don't think he said but how much did it go for?
I searched sold listings and couldn't find it. I would really like to know as well.
Kicker was the shit when I was in highschool in the 90s. I can't believe it was 30 years ago 😲🤤✌️✌️
That dude is mint! I was hoping to see those suitcase guts tho yo!
Fo sho, I thought about it, but the hex bolts still had the OG paint on them and I didn't want to disrupt the look. These are hard to open up as you know.
@@wal what was ur $ price $ ? Thanks big D. I wonder if my Clarion APX 400.2 would dyno similar results?
He doesn't want to void the warranty bro.....geez. He didn't even send the warranty card in!
LOL could you imagine sending it in for warranty repair? I bet you get a different amp back!
@DJ WRAITH As if some paint and a Q-tip couldn't be sourced?
@@jamesplotkin4674 changes it’s collector’s nostalgia 🤷♂️ as an original- could easily be made an NFT
I still remember when Kicker founder came in to store I worked at selling the OG truck box back in like 1981 or 1982...what a game changer.....
Wow, i had no idea they were around that long ago. I was 5 in 82, didn't know kicker was a thing until like 1990, thought they were brand new.
I wonder how many people were looking to buy an amp , stumbled across big D , watched a couple tests , then subbed , and now watch every single "episode (?)".
He test stuff so we don't have to.
He's the go to man before buying equipment.
@@iceman1648 I bought that ignite amp after watching some test vids
im still using a kicker 100si that I won in a sound comp back in the 90's. it definitely doesn't look as good as that one and the plastic trim got lost during one of the many times I loaned it out. But it still does the job.
Hell yeah...good is good and don't go out of date 👍
One of the selling points of these Amps was being able to Hide the Wiring for a "Clean" Install. Especially in cars with rear deck lids, you could have the Amp on display and no wires showing through the rear window. That is why Kicker let the installer cut out that part of the cover for the wire install.
Good point 🤙
I still have a C10 Kicker subwoofer, using since 1997 and i like very much, low fs and easy to drive, very low frequencies from a 4th bandpass in my beetle!
😬👍
It's crazy how much better looking the old amps are! Some of these new amps out today look all plastic and junk but this piece right here has a professional look to it!
You said it brother
Kicker always amazes me with how everything is created or built.
Badass amps. These are what got me into car audio. Seen a system with just two of these amps, one running 4 kicker 12s and the other running 12 mids and tweets. Crazy!!!!
Nobody knows why we did what we did in the '90s. It was an acceptable excuse to just say "it's the '90s" and move on without explanation.
I think when you test the older amplifiers like this you should play music for those years cause that's what is was built for
That deep, Thinking Brother👍
The section that can be broken out is left in if you wanted to back wire the amp so you don’t see the wires 👍🏻. Kind of like my 90’s Fosgate amps, you had to back wire the amp to put on the end covers so you’d have a clean looking install. One of my good friends owns Custom Enclosures Car Audio in Bristol VA and back in the days I’ve seen quite a few installed by him that way. Beautiful amp in perfect condition and it works to boot!
The "breakout plate" was an option so you could have the wires hidden by going out the bottom of the amp, which was in the amp cut out template. If you didnt want them to be completely hidden you could break off the breakout plate and have the wires come out through the front instead.
I know Dereck's feeling of joy getting this amp. I just scored 2 USA made JBL GTX 15" subs circa 1995 from eBay. Were listed as mint condition. In reality they were brand freaking new, never been mounted, in original boxes with the manuals! Back in the day these subs were the bomb. I had a set in the high school days and needed them again... You know what I mean!
Yeah man it’s incredible to see minty stuff that’s this old
I was happy to be into car audio in the mid to late 90s the golden era ! Too bad I had no money back then ! lol
I'm 16 wish I could have been there I've always grown up hearing abt my dads Camaro and how crazy the OG kicker solo barrack's were so I got the 2020 versions and I truly wish I was alive when this was big
@@tenacious5735 I was 16 in 1996, and it was a dream to own this stuff. Worked forever at minimum wage to buy anything. And then, you make dumbass teenager mistakes. Like when I finally bought a 300 watt class d MTX amp, and then 6 months later allowed it to get flooded with water 😢. At least you young guys can buy better beat than we had. Also, we burned up batteries and alternators quite easily. Everything ran hot in those days. The average car had a 60 amp alternator or so. We always ended up abusing the cars electrical system because of it. Rough times lol
The plate not being broken out from the factory is because it had the holes in the bottom of the amp to run the wires hidden instead of running out the back. If you look at the cutout template it shows you the cut pattern for running the wires hidden.
Looks like new old stock!! Legends of car audio type stuff!! Beautiful amp.
100w x 2 and we were HAPPY to get that kind of power!!
YEAH BOI! Got to love it when you find an amp in that condition and carefully shipped - nice find! :D And it works - sweet!!! It bump doe very nicely in Tri-mode. KICK'N IT OLD SCHOOL STYLE!
😎👍
Everything I ever owned looks like new even after several decades! When I sold stuff, people always ask "did you even use it?"
Same here
Once in a lifetime purchase there it's nice than I could ever imagine.
I have one in almost as good condition. Glad to see it still makes rated power without being recapped.
When an eBay package comes in and there's a mint amp, man that is a experience. I get the same feeling buying old school Aiwa integrated amps.
I remember back in the early 00s I traded my jacked up 1994 Eddie Bauer Explorer on 33x12.50s for a 1992 Acura Integra, a set of 17" chrome wheels (which were REALLY cheesy), a Soundstream Rubicon 4 channel 1000w amp, and four Kicker Solobaric 10s. I remember the motors on the subs said Stillwater Designs on them. They were definitely old, but my cousin was owed a favor by a local stereo shop and they built me a custom fit box for the hatch area. Those subs sounded SO good and hit fairly hard. I remember that I had a Sony (the ONLY car stereos that I would buy back then) Xplod tape deck with a Sony 10-disc CD changer. I even had an old Sony unpowered tape deck with a motorized face that folded down to expose the tape deck and I had a Sony 4 channel amp that went with it. I also had an old red anodized US Amps 125x4 that was .25 ohm stable with a plexiglass bottom and about 4 feet long. When I was in high school I had an 89 Chevy Beretta GT with two Image Dynamic amps and two Image Dynamic 15s and people at my school said that it sounded like thunder. I shattered my rear windshield in front of the school one day while I was leaving the parking lot and I was suspended for 3 days because of it.
Good times 👌…well, except for the suspension part 🤣
I also loved the tape deck and cd changer setup. Mostly because tape decks were not prime targets for theft. It was awesome. Listen to anything, make mix tapes and in a beater car, nobody knew you were packing
Green LED’s were more expensive than red ones in the early 90’s
Why
pro tip: you can watch series at InstaFlixxer. Me and my gf have been using them for watching lots of of movies these days.
@Sam Dustin Yea, I have been using instaflixxer for since december myself :)
Blue ones were about $5/ea in late 90s
@@gregbridgesjr5535 they just were more expensive to make in the early days. Blues and whites didn’t even exist back then.
Love that 90’s Pr0N tune at the beginning!
Ran a Kicker Impulse 1252xi in tri mode on an old school Crunch 12 and two Crunch 10s. That setup SLAPPED
It was funny to see Kraco in the listing in the beginning of the video. That was all I could afford back then :)
Once again my man BigD nailed another dyno spot on the money… some one buy this guy a beer 🍺
200si is the one I let get away! I was about 18 and bought one of these (so it was a 5-6 year old amp) from a friend for $200- I was 'using it' and basically the bass made a couch fart sound prior to the main fuse popping and smelling the magic smoke. I used it for maybe 1 year. Sent it to Kicker for repair, they wanted $200 plus return shipping to fix an amp I spent $200 on, so it I let it stay with Kicker.
In my case, the vehicle didn't have enough alternator output to keep up with that amp, and the amp in turn tried to pull more current to sustain the load. This created a real hot spot right at the voltage input and return, so hot it caused the plastic and 8 gauge wire jacket to melt right at that input on the amp. Who knows, it could have been an insufficient ground as well. Gotta love those first systems.
I had a Sansui, 2 channel 75 watt RMS car amplifier from the late 80’s/early 90’s. All it had was one sensitivity adjustment, power in and RCA plugs. A simple no frills plug and play amplifier. I wish I had that amplifier today.
Great Old School amplifier that kicked ass.
We didn’t realize how great some of the old school car stereo products were from Japan until manufacturers first started making lower quality products made in China. I wish I still had my old Nakamichi head unit made in Japan, along with my old school Boston Acoustics 6 X 9 speakers. Today I have all JLAUDIO that is dated.
Older. JLAUDIO Slash series A/B amplifier’s, 4 channel and 5 channel with JLAUDIO speakers and sub. I am keeping those.
My dad had an awesome Sansui home receiver he brought home from Vietnam. “100 watts per channel”. Yeah, right. No full size old school floor speakers could handle it at half power. I would crank it after high school before he got home. What killer sound and quality
You found yourself a Time capsule ! Excellent video and review of a piece of C.A history .
Thanks 🙏
Same happened to me when I ordered a Kicker Impulse amp years ago. wasn't supposed to work, but with the exception of a fussy gain control it works great!!!
Lol, watching this takes me back to High School. My buddy had a Kicker amp, and one of those Stillwater Designs SS boxes. It had 2-12" s with a set of mids, and tweets. Had a house stereo style speaker grill made of nylon. Good times back then.
FYI i have been watching your videos for about a year now. I have never owned a car amp 😆 or a car hi-Fi of any note.
Love your videos. Keep up the good work.
Why not, make it thump, totally worth it!!!
This is a testament to the quality components Kicker used back then. Cheap caps would have probably failed by now. You should do a custom retro install in your vehicle. Would probably look dope. And sound even better.
Very nice! Another good vidya from mah boy Bid D. I find it interesting how good that sounds with how little power it puts out. Definitely not competition level output, but still very impressive. Thanks Big D!
What a beautiful piece of equipment these new amplifiers don't hold a candle to the old stuff as far as design
I bought a ZR240 from someone in California for $50 was also mint and had the SWS (subwoofer module) with it. They said they didn't know if it worked so I messaged them back after I hooked it up letting them know I was very pleased with my purchase. 3 years later I ended up selling it for $450
this is super cool to see. all original boxes and everything! that amp is older than me!
I Remember those! We use to call them "BARBECUE GRILLES" because of how the heat sinks are built.
I bought the model down from this one. 160si or 120si. I cant remember. I saved all my money from working minimum wage. It was the first part of my system I bought. It ended up blowing. I contacted kicker and they offered me the current model up from it for just a bit more money. Think it was the SS line. It was an amazing amp.
Nice find.. Ya back in the 90s i knew several ppl that uses a single Phoenix gold m25 to power all there speakers. Not many ppl do it anymore.
One of the amplifiers that I had a chance to own. Great memories.
The power & protect light extenders are ,east to be seen from the top of them. They’re made from plexi & just work like an extension to the top of the amp cover. With the cover on you will only see the tips of those extender rods from the top of the amp & wire cover. Killer new amp Brotien!!!
Awesome video man! All i could think about is my old x50s competition i had and then you mentioned at the end that you tested one! Im going to look for that video now!! Again thanks for the trip down memory road!! Keep the awesome content flowing!! Respect from Canada brother!
Awesome video Big D, we love to see that fresh lookin' old school goodness. Yea boy!!!
I had the original 200si. This is the revision with the increased input sensitivity gain. I used the KEQ module with 6db active bass boost(double output) pushing two grey 8ohm solo baric 12s in bridged mode. I used 90 degree rca cables from underneath so not to break the tab on the cover. I had the 200si, zr120, 40ss, and 50si daisy chained with crossover modules creating bandpass points.
Awesome 👏
Really nice old school amp. Thanks for sharing this gem.
I went to an estate auction about 2 years ago and the dude used to own a car audio shop, all the speakers where junk but I got 4 Precision Power 800W amps brand new in the original box for $100!! Best deal I ever got! The lady was like "Get this junk out of here" lol!!
Hahahaha lucky fucker 😁👍
Wow, beautiful piece of equipment. Looks like a a/d/s PQ10 . I remember these series amps from back in the day. A car audio shop called GO- HO Audio in the Tidewater of Virginia sold these. They carried Alpine, a/d/s, Kicker, Kenwood, Sony and Rockford Fosgate. They were considered the hi end shop in our area.
I have a really old video showing when I got a PQ10, you can see it here: th-cam.com/video/2ace5lWpvDg/w-d-xo.html
I also did a test on this amp on my 2nd channel here: th-cam.com/video/LfZA690qOLw/w-d-xo.html
@wal I'll check it out. It's amazing how some of these pieces have survived through the years. I'm sitting on a PQ- 10, PQ -20, PH-15 and a brand new pair of a/d/s 300is plate speakers with instructions and templates. The box is just worn out. Still have my Kicker ZR360 and ZR600. I have a pair of Soundstream SPL-10's And last a pair of Rockford Fosgate pwr-412. I'm actually going to build a box next week for them. Bro keep up the amazing videos. They keep young at heart. I'm 52 yrs old and I've been into car audio since I was 16yrs old. One day hopefully I'll run into my dream amplifier, which is a Soundstream MC- 500 or a MC-300.. Soundstream MC & Reference series and Rockford Fosgate DSM are favorite amps of all time.
yeah i remember those modules. they used them all the way into the ZR amps. those ZR's were great amps. expensive, but usually way more powerful than rated, even the 120's bumped lol
One of the first amps I tested when I got my Dyno was the ZR120
Old School Kicker ZR120 Amp Power Output Test SMD DD-1 o'scope
th-cam.com/video/e1oh1QbNCLs/w-d-xo.html
Great find and pick up Big D. Can't wait for the kicker podcast tuesday to find out what Kip has to say about this.
Reminds me of my old A/D/S/ powerplate amps back in the day!
I thought so to and it IS an A/D/S made for Kicker I'm guessing, not sure why big D didn't say anything, I'm about to ask him. Go to .41 in the video where he is showing the Ad in the 94 directory at the bottom of the page you see A/D/S.
I as well had a P80, P120, and a PQ15.....
I remember selling these back in the day. I so wish I'd gotten one.
Tri-way crossover, I remember reading about those, even understood/understand how they worked, but your video is the first time I have ever actually seen one. I think I understand why Kicker made it to where you have to break out that plastic on the cover. If you look at the install template, there is a section for "Cut Along dotted lines for hidden wire mounting" I suspect you could bring the wires in from the bottom and just leave the plastic piece there for a super clean look! That would have been super slick!
@ 1:28 . Fun fact , when using the " a super knife " never shift yourself into a flashback . When returning from said flashback there is a 28.3 percent chance u will get disoriented and scratch a heat sink or a finger
I was used to the red power light, I never got used the green light, I like that they are using blue lights now, awesome amp thou
Beautiful old school amplifier. Take care of that one. I kinda wish some of the new amps now had had some fins for cooling and looks. 😁🤛🤛
Awesome! Takes me back to my teenage days. Great video 👍👊
Very clean amp and sounds clean as well. Tri-mode working good.
Love your video today!!!! Thank you for the upload. Wow, a mint step back in time.
A real survivor there. Nice time capsule!
Facts!
Kicker L7R Quad Box! See the Quad Box video here: th-cam.com/video/mZceqPLn1lY/w-d-xo.html
Download the Kicker Modules Article: is.gd/199510kickermodules
See my first SPL Run here: th-cam.com/video/JUNlnRccI0Y/w-d-xo.html
**Update** See my quest to 140dB: th-cam.com/video/oYtz-VJ7rJ0/w-d-xo.html
1995 KICKER 500ss Amplifier: th-cam.com/video/S8VB1UCGUe4/w-d-xo.html
1997 KICKER ZR120 Amplifier: th-cam.com/video/e1oh1QbNCLs/w-d-xo.html
1996 KICKER X50s Amplifier: th-cam.com/video/pAnp05mIx3Q/w-d-xo.html
Like these old school amp videos? Support me for more like this.
www.patreon.com/OldSchoolStereo
Shop for Down4Sound Amps: is.gd/D4Samps
Shop for Savard Hi-Q Subwoofers: amzn.to/2Nh1qcf
Check Out My 2nd Channel: www.wheeliewilliston.com
See Old School SPL Challenge: facebook.com/groups/oldschoolspl2019
See my playlist of cheater amps: th-cam.com/play/PL6519F5277A57F8BA.html
DISCLAIMER: This video and description contains affiliate links, which means that if you purchase from one of the product links, I may receive a small commission. As an Amazon Associate I earn from qualifying purchases1997 KICKER ZR240 Amplifier: th-cam.com/video/kr9Ebng37us/w-d-xo.html
Video Index:
0:00 Intro
1:16 Unboxing
2:46 Wow MINT!
5:54 Amp Module
8:06 Replacing Fuse
11:04 Does it Work?
14:02 Amp Dyno Tests
16:58 Do it Bump Doe?
20:29 Extras
That break out piece was depending upon mounting. If you wanted to hide the wires you would run them down through the bottom and keep that piece there to give a clean look to the install.
Kicker still builds some killer amps 💪💪
that crossover is so cool for adding a sub to a full range stereo amp setup!!
Old skool cool
I'm surprised the numbers weren't a bit higher. I had one of these back in the day and that thing HIT!
That was Awesome
I wanted a Kicker amp back in the day
That amp is mint and clean love it.. Wow now about price. It was very expensive for what your getting back in the day back in 1994 when my Dad's old 94 Buick Roadmaster was new.
MAN, you came up right here D! AWSOME AMP!
I suspect the cutout on the cover plate is optional based on how you route wires. If the wires pass through the vanity panel the amp is mounted through and you use right angle RCAs, some owners may not want the large opening showing on that face of the amp and the wires would be hidden/stealthy.
Nice snag on this amp!
That Tri mode got me thinking 🤔 lol That’s awesome it worked right out the box ! Some people just don’t know what they have !
Oldie but a goodie 💪 Great score on that amp. 👌
I remember when I was about 12 or 13 (1993-94) I wanted to get that kicker logo tattooed on myself. Glad I grew out of that by the time I was legally allowed to be doodled on. Loved kicker stuff
I still have my kicker 200xi. Still works
I had one of those style crossovers made by Cerwin Vega. It was the original way to hookup 2 satélites and 2 subs. I made 2 sub cabinets same color and width as a pair of Bose 301 and converted them into lar power handling big bass speakers.
Kicker, Rockford and others used to be like muscle cars in the 60's way under rating their horse power. I was into car audio from about 1996-2000 and amps where always crazy powerful, I remember always smoking subs with a good Kicker amp.
I never broke those out. We installed the wires from the bottom and just made sure we used risers or cut out the mount.
Good call 👍
Tri-mode was awesome for us broke guys, ran Pioneer GM-H50 and then GM-H100 that way. A cool test would be power outputs through the tri-mode! Very cool stuff Big D
I had gmh 100 50w×2@4ohm and the gmh 200 100w×2@4ohm, but the 200 had two 30amp fuses and three power supply (1 4 fan) but I never understood the difference between bipolar & mosfet. The fact that it didn't come with a crossover made me go to the 921 kenwood and a sherwood bp 240 and to this day I've never heard a cleaner pioner amp for 4 6×9. Good times
I looked at the ELAC bookshelf speakers you use. The woofer has a huge magnet on it! The woofer itself is almost $100 on EBay. Wow.
You the man great work and showing that old school amp WTG keep rolling on the master at this life 4real .The Man
Whoa! A blast from the past
This magazine was HUGE!!!!
WOW in the box and with the Kicker ID card and everything?!!
If that Jessica’s last name is Rabbit, tell her hi for me please! I love her!
💯
They looked a lot like the A/D/S amps which were the top line audiophile amp back in the day.... So clean....
Yep... bought a couple ads amps from a high end audio shop in San Antonio that was going out of business
Old school amps are worth every penny
My first nice amp would have been a 500si, but my dad sent it back not realizing it was mine as I had it under the business name 😞 that being said I called up Speed & Sound and explained, but also decided to go with my other pick instead which they were ok with. A Hifonics gen x Zues. Glad I ended up with Hifonics gen x amps after all 👍 Yet still ran Kicker comp 15's and later 18's which were beast in the mid 90's
Love it. You brought us back in time
Thanks for watching and commenting!
Dang thats so cool... like early 90s IASCA- SQ. Put an audio control EQ infront of the amp and youre all set. LOL at those efficiency numbers, I don't think anyone even cared about efficiency back then. thanks Derek!! Shout out to Jessica too!!
Still sounds good to be that old.
Yeah boi she smooth
There is a car audio store in my town that’s been owned by the same guy since I was a kid. Now in my 30s. He has quite a few never used old school amps in the store still. He will sell them but he wants crazy money for them. Wish I could afford them. I’d buy them all. Lol
Soo awesome!! I was 9.. thanks for sharing that with us! I figured ot worked when i seen it. 😎
I can only imagine how sweet that old ab would sound in an sq setup on the subwoofer. I swear i can tell the difference in d vs ab, even on a subwoofer. Im a broke a$$ basshead, so i use class d, but if i had this amp, id give up several db.❤❤❤❤